PR403-1

BDS Suspension adds new 5” high clearance lift systems for the 2020 Chevy and GMC 2500HD/3500HD trucks. These systems join existing 3" and 6.5" options to allow room for larger wheels/tires and improve offroad capability while maintaining on-road handling and comfort. These new suspension systems utilize the tried and true high-clearance IFS design that has made BDS the preferred suspension lift for late model GM HDs updated to correct suspension, steering and driveline geometry on the 2020 models. As with all BDS suspension systems these new 5" lift systems are backed by Factory Protection Plus offering you peace of mind for your adventure. This includes a BDS No Fine Print Warranty, ESC System compatibility and supplemental 5year-100,000mile drivetrain protection. Build your late model HD up right with BDS Suspension.

Product Description

5" High Clearance Lift System for 2020 Chevy/GMC HD Trucks

Product Info

766FS - 5" High Clearance Lift System w/ Fox Shocks (w/o Overloads)
767FS
- 5" High Clearance Lift System w/ Fox Shocks (w/ Overloads)

Vehicle Fitment

2020 Chevrolet Silverado 2500HD
2020 Chevrolet Silverado 3500HD
2020 GMC Sierra 2500HD
2020 GMC Sierra 3500HD
2020 GMC Denali 2500HD
2020 GMC Denali 3500HD

Available Accessories

#BDS55383/85430 - Steering Stabilizer Kit
#BDS121304 - BDS Upper Control Arm Kit
#BDS121612 - Carrier Bearing Drop Kit

Features/Benefits:

  • High Clearance design w/ no torsion bar drop maximizes ground clearance
  • Robust steering knuckles maintain ESC System compliance
  • Multi piece differential relocation brackets
  • HD skid plates for improved offroad protection
  • Choice of NX2 of FOX 2.0 gas shocks for improved performance
  • Factory Protection Plus included
  • Allows fitment for up to 37” tires

Rec'd Wheel/Tire Specs

37x12.50 Tires with 20x9 Wheels and 5-5.5" BS
35x12.50 Tires with 20x10 Wheels and 5-5.5" BS
35x12.50 Tires with 17x9/18x9 Wheels and 4.5-4.625" BS

Related Kits/Products

#BDS760FS/761FS - 3" Lift Kits
#BDS753FS/756FS - 6.5" Lift Kits

Important Notes

  • U-bolts will not work vehicles equipped with top-mounted overload springs or add-a-leafs.
  • Compatible with gas or diesel models.
  • Compatible with standard models as well as AT4 models.
  • Some minor trim will be required with certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks. Trimming will normally included the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet.
Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension adds complete 5" high clearance lift systems for the 2020 model year Chevy Silverado and GMC Sierra 2500HD and 3500 HD trucks. Based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, these systems have been designed from the ground up for the 2020 HDs to get the more out of these trucks with the most ground clearance on the market. These new 5" lift systems join existing 3" and 6.5" options bringing comfortable, handling, and capability with clearance for up to 37" tires. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality.

At the heart of this new 5" lift systems BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles are a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential to keep CV axle angles at a minimum. To help maximize clearance a pair of specially designed torsion bar relocations brackets are supplied to mount to the lower control arms to retain the factory high clearance frame mounted crossmember. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar along with extended length braided stainless steel brake lines. Rounding out the front of this kit are FOX 2.0 performance series IFP shocks.

In the rear of this 5" lift system, 3" lift blocks and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly a matching set of FOX 2.0 performance series IFP shocks are supplied to compliment the front setup. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC system compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2020 Chevy/GMC 2500/3500HD truck with this new 5" lift system from BDS Suspension.

 

Media Gallery

2020 GMC Sierra AT4 HD All-Mountain Concept (Not Available for Sale) (Photo by Matthew Staver for GMC)

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR406-1

BDS Suspension adds to its lineup of suspension lifts and accessories for the late model 2019-2020 RAM 1500 and Rebel with new 4" lift systems for the air ride equipped models. Built around the tried and true high clearance technology used on all BDS RAM 1500 kits, these new systems have been engineered and tested to retain full functionality of the adjustable ride height air suspension, while correcting suspension, steering and driveline geometry. The result, a rugged, capable lift system that is comfortable on the road with clearance for 35" tires. As with all BDS lift kits these 4" IFS systems are backed by Factory Protection Plus bringing peace of mind with BDS's No Fine Print Warranty, FMVSS No.126 ESC system compliance, and a 5-year 100,000-mile drivetrain warranty at no additional cost. Improve the stance and capability of your RAM Rebel with BDS Suspension.

Product Description

4" Air Ride Lift Systems
for 2019-2020 RAM 1500 4WD

Vehicle Fitment

2019-2020 RAM 1500 Air Ride 4WD
*2021 models have not been approved

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Product Info

1697H/FS - 4" Air Ride Lift System (std bore knuckles)
1698H/FS
- 4" Air Ride Lift Systems (large bore knuckles)

Features/Benefits:

  • Kit retains full functionality of the air ride system and ride height modes
  • Retains ride quality and handling characteristics
  • Utilizes high clearance crossmembers and differential skid for strength and protection
  • 3piece differential relocation secures front differential while improving CV axle angle
  • CNC machined ductile iron steering knuckles for FMVSS No.126 (ESC System) compliance
  • Allows clearance for 35" tires

Available Accessories:

BDS122402 – 19-21 RAM 1500 Carrier Bearing Drop

Important Notes

  • Extreme care/caution must be taken to follow the steps of these instructions to prevent any air leaks or damage to the bags during installation.
  • The factory air ride is a closed loop system. Opening the system more times than recommended in the lift instructions will require the system to be recharged (this can be done at any RAM dealer service department). A scan tool is needed to access the air control module to perform the service.
  • Frame bracket modification is required.
  • Fits 4WD models equipped with factory air ride only.
  • Stock 17-18" wheels cannot be reinstalled, stock 20"+ wheels can be reinstalled with factory size tires.
  • Trucks equipped with factory 22" wheels must use the large bore steering knuckles.

Rec'd Wheel/Tire Specs

35x12.50 Tires with 17x9 Wheels and 4.5" BS
35x12.50 Tires with 18x9 Wheels and 5" BS
35x12.50 Tires with 20x9 Wheels and 5" BS
35x12.50 Tires with 22x9 Wheels and 5" BS

Coldwater, MI : BDS Suspension is now offering updated 4" lift systems for the late model 2019-2020 RAM 1500 and Rebel trucks equipped with Air Ride. These new air ride compatible kits are built to the highest standard to maximize the truck’s potential with room for 35" tires. Built on BDS’s tried and true high clearance design these kits correct steering, suspension and driveline geometry for on road comfort, handling and safety. These systems have been engineered and tested to retain full functionality of the factory air ride system allowing you to adjust ride height through the various modes. Up front this 4" system includes a pair of high clearance laser cut crossmembers along with a 3-point differential relocation system and differential skid plate to create a stout subframe for the suspension components to be installed. New ductile iron CNC machined steering knuckles are supplied along with heavy duty tie rod ends to keep allow for ESC system compatibility. Top mounted strut spacers are supplied to allow the use of the air ride front air bag struts along with all the necessary air-line fittings. A billet aluminum driveshaft spacers is supplied to lengthen the factory front driveline along with brake line brackets, sway bar link extensions and all the necessary hardware to complete the install.

The rear of the air-ride equipped RAM 1500 mimics the standard RAM 1500 with the exception of adjustable height rear air bags. The additional ride height comes from a pair of 3" top mounted air bag spacers to lift and level the stance. New air lines and fittings are supplied to along with ride height sensor brackets to maintain proper positioning and functionality of the factory air ride system at the new height. BDS supplies rear upper control arm relocation brackets to correct the geometry at the taller ride height. A track bar correction bracket is supplied to recenter the rear axle along with new extended length sway bar links to improve stability on and off-road. Rounding out the rear of these air ride kits are brake line relocation brackets, bump stop extensions and your choice of either BDS NX2 gas or upgrade FOX 2.0 performance series gas shocks. This new 4" lift kit corrects the suspension geometry and allow for full use of the ride height adjustability in the various modes to with the base lift set at 4" over. Get more out of your air ride equipped RAM 1500 or Rebel with BDS!

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR405-1

BDS Suspension is now shipping lift systems for the 2021 Jeep Wrangler JL. These kits are designed for improved on/off-road performance and clearance up to 37” tires. Designed to not only lift, but enhance the new Wrangler JL’s all around performance, these new systems come complete and ready to perform right out of the box with ProRide coil springs, NX2 or FOX 2.0 gas shocks, sway bar disconnects, heavy duty front track and rear track bar bracket, caster correction and more.

Product Description

Lift Systems & Accessories for
2021 Jeep Wrangler JL

Vehicle Fitment

2018-2021 Jeep Wrangler JL 4Dr 2018-2021 Jeep Wrangler JL 2Dr

Kit Info

#1435H/FS - (4Dr) 2" Lift System
#1437H/FS - (4Dr) 3" Lift System
#1438H/FS - (2Dr) 3" Lift System

Available Accessories

BDS85432 - NX2 Stabilizer (x1)
FOX98524173 - FOX Stabilizer (x1)
FOX98302148 - FOX ATS Stabilizer
BDS55381 – Dual Stabilizer Bracket
BDS85429 - NX2 Stabilizer (x2)
FOX98224429 - FOX Stabilizer (x2)
BDS124453 – Adj Front Track Bar
BDS124344 – Adj Front UCA Kit
BDS124343 – Adj Front LCA Kit
BDS124346 – Adj Rear UCA Kit
BDS124467 – Adj Rear LCA Kit
BDS124466 – Fixed Rear LCA Kit
NX2 Shocks/Stabilizers
FOX 2.0 Perf Shocks/Stabilizers

Important Notes

Non-Rubicon comes from factory at lower ride height, will net slightly more lift final stance the same for all models

Not approved for 4xe models

Not approved for Rubicon 392 models

Stock wheels cannot be reinstalled without spacers due to rear sway bar interference.

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

BDS Suspension has several new kits in the development for the 2018-2021 Jeep Wrangler and Wrangler Unlimited JL. Designed to not only lift, but enhance the new Wrangler JL’s all around performance, these systems come complete and ready to perform right out of the box. At each corner replacement 2Dr or 4Dr JL-specific ProRide coil springs are supplied to mimic the factory ride and spring rate. These springs provide additional ride height, along with allowing for increased suspension travel. They are paired to your choice of specially tuned NX2-series gas or FOX 2.0 performance series IFP gas shocks to offer a smooth ride and better damping in rough terrain.

As with all BDS Suspension products these are backed by Factory Protection Plus offering safety and security with a limited lifetime warranty and ESC system compatibility along with 5-year, 100,000-mile extended drivetrain warranty. Go with confidence and get more out of your new late model Jeep Wrangler JL with BDS Suspension.

Media Gallery

2" Lift Systems for 2018-2021 Jeep Wrangler JL
3" Lift Systems for 2018-2021 Jeep Wrangler JL
3" Lift Systems for 2018-2021 Jeep Wrangler JL

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR404-1

BDS Suspension is now shipping lift kits for the 2021 RAM 1500 4WD trucks. Currently available in 2", 4" and 6" lift heights, these lift options improve the look, performance, and capability of your late model RAM 1500 with clearance for up to 37". As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2021 RAM with BDS Suspension.

Product Description

BDS 2" / 4" / 6" Lift Systems
for 2021 RAM 1500 Trucks 4WD

Vehicle Fitment

2021 RAM 1500 4WD
2021 RAM 1500 Rebel
*non-AirRide models only

Rec'd Wheel/Tire Specs

2" Kits
295/65r20 Tires on 20x9 Wheels (5" BS)*

4" Kits
35x12.50 Tires on 20x9 Wheels (5" BS)*

6" Kits
37x12.50 Tires on 20x9 Wheels (5" BS)*

*additional tire/wheel listings on website

Product Info

AirRide Equipped Trucks
Kits Coming Soon

Non-AirRide Equipped Trucks
1664F – 2” Coilover System
1664FDSC – 2” DSC Coilover System

1663H/FS - 4" Lift System (std bore knuckles)
1664H/FS - 4" Lift Systems (large bore knuckles)

1661H/FS – 6” Lift System (std bore knuckles)
1661F – 6” Coilover System (std bore knuckles)
1661FDSC – 6” DSC Coilover System (std bore knuckles)

1662H/FS – 6” Lift System (large bore knuckles)
1662F – 6” Coilover System (large bore knuckles)
1662FDSC – 6” DSC Coilover System (large bore knuckles)

Available Accesories

122251 - Performance UCA Kit
122402 - Carrier Bearing Drop Kit
BDS NX2 Gas Shocks
FOX 2.0 Performance Series Shocks
FOX 2.5 Factory Race Series Coilovers

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

2" Coilover Systems: These kits are designed to be so much more than just a "leveling kit" offering next level performance and comfort. At the heart of these kits are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers preset and ready to perform right out of the box. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. Additionally a pair of performance upper control arms (UCAs) are used to improve strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package.

4" and 6" Lift Systems: Stepping up to 4" and 6" heights BDS offers complete IFS lift systems designed to correct suspension, steering, and drivetrain geometry with clearance for 35-37" tires. At either height a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. Heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering linkage with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS’s multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on the 4” lifts comes from an easy to install top mounted strut spacer to maintain ride quality and handling characteristics. On the 6” lifts you have the option of a combination top mounted strut spacer and preload spacers designed to not over extend the suspension during droop travel.. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.

In the rear of these 4" or 6" kits are a pair of 3" or 5" ProRide dual rate coil springs to lift and level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.

6" Coilover Systems: Building on the BDS lift systems these coilover systems up the ante for next level performance. In place of the factory strut + strut spacer these systems upgrade to FOX 2.5 factory race series coilovers with a remote reservoir for improved damper performance. These coilovers are available with or without the optional DSC (dual speed compression) adjustment built in. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The optional DSC adjustment technology builds on the racing pedigree of the FOX 2.5 remote reservoir coilovers adding easy tuning of the vehicle’s suspension compression dampening to dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high-speed compression as well as 10 adjustment points for the low-speed compression allowing you to make large or small changes to further improve your performance for your particular needs. These pair with the 1/4" steel laser cut high clearance crossmembers, the heavy duty front skid plate system and ductile iron steering knuckles to correct suspension and steering geometry. Also included are replacement tie rod ends, front differential relocation brackets, a billet aluminum front driveshaft spacer, stainless steel braided brake line and sway bar relocation brackets. In the rear a pair of 5" ProRide dual rate coil springs to lift and level the stance along with control arm relocation brackets, rear track bar relocation bracket, extended length sway bar links and bump stop extensions along with FOX 2.0 IFP performance series gas shocks to offer improved damper performance. Take your RAM to the next level with BDS and FOX.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR402-1

BDS Suspension is now shipping leveling kits, lift kits, and accessories for the 2021 Ford F250/F350 Super Duty trucks. These kits are a carry over from 2020 fitments now tested and approved for use on the 2021 models. Current kits include 2.5", 4", and 6" lift heights with more options on the way, BDS offers a variety of lift options to improve the look, performance, and capability of your late model Super Duty. Along with these lift options, BDS also offers several accessory options including shocks and stabilizers, coilover conversions, radius arms, driveline adjustment, track bars and traction bars. As with all BDS kits, these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, ESC System compliance and a 5year - 60,000mile supplemental drivetrain warranty.

Product Description

BDS Lift Kits and Accessories for 2021 Ford Super Duty

Product Info

2020-2021 F250/F350 SRW Gas
BDS1550H/FS – 4” Radius Arm Systems w/ rear block
BDS1560H/FS – 4” Radius Arm Systems w/ rear spring
BDS1568H/FS – 4” 4-Link Systems w/ rear block
BDS1570H/FS – 4” 4-Link Systems w/ rear spring

2020-2021 F350 DRW Gas
BDS1564H/FS – 4” Radius Arm Systems w/ rear block
BDS1566H/FS – 4” 4-Link Systems w/ rear block

2020-2021 F250/F350 SRW Diesel
BDS1549H/FS – 2.5” Radius Arm Systems w/ rear block
BDS1549F – 2.5” Radius Arm Coilover Systems w/ rear block
BDS1551H/FS – 4” Radius Arm Systems w/ rear block
BDS1551F – 4” Radius Arm Coilover Systems w/ rear block
BDS1557H/FS – 4” Radius Arm Systems w/ rear spring
BDS1557F/FDSC – 4” Radius Arm Coilover Systems w/ rear spring
BDS1567H/FS – 4” 4-Link Systems w/ rear block
BDS1567F/FDSC – 4” 4-Link Coilover Systems w/ rear block
BDS1569H/FS – 4” 4-Link Systems w/ rear spring
BDS1569F/FDSC – 4” 4-Link Coilovers System w/ rear spring
BDS1561H/FS - 6" Radius Arm System w/ rear block
BDS1561F/FDSC - 6" Radius Arm C/O System w/ rear block
BDS1562H/FS - 6" Radius Arm System w/ rear spring
BDS1562F/FDSC - 6" Radius Arm C/O System w/ full spring

2020-2021 F350 DRW Diesel
BDS1549H/FS – 2.5” Radius Arm Systems w/ rear block
BDS1549F – 2.5” Radius Arm Coilover Systems w/ rear block
BDS1563H/FS – 4” Radius Arm Systems w/ rear block
BDS1563F/FDSC – 4” Radius Arm Coilover Systems w/ rear block
BDS1565H/FS – 4” 4-Link Systems w/ rear block
BDS1565F/FDSC – 4” 4-Link Systems w/ rear block
BDS1573H/FS - 6" Radius Arm System w/ rear block
BDS1573F/FDSC - 6" Radius Arm C/O System w/ rear block
1573H/FS – 6” Radius Arm Lift Kit w/ Rear Block
1573F/FDSC – 6” Radius Arm Coilover Lift Kit w/ Rear Block

*additional kits coming soon

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Vehicle Fitment

2020-2021 Ford F250 Super Duty 4WD
2020-2021 Ford F350 Super Duty 4WD - SRW
2020-2021 Ford F350 Super Duty 4WD - DRW

Available Accessories

BDS85431 - Single NX2 Steering Stabilizer
BDS55380+BDS85429(x2) - Dual NX2 Steering Stabilizer Kit
BDS55380+FOX98224010(x2) - Dual FOX Steering Stabilizer Kit
BDS123203 - Adjustable Track Bar Kit
BDS123402 - Carrier Bearing Drop Kit
BDS123251 – HD Radius Arm Kit
BDS123605 – T-Case Indexing Ring Kit
BDS123005 - Rear Sway Bar Link Kit
BDS123809 - Rear Driveshaft Spacer Kit
BDS123416+BDS123409 - Recoil Traction Bars (3.5-4” Axle Dia)
BDS123426+BDS123409 - Recoil Traction Bars (4.5” Axle Dia)
BDS123613 – Front Coilover Mounting Bracket Kit
123808 – Rear Sway Bar Links (6-8” Lifts)
FOX 2.5 R/R Coilovers
NX2 and FOX 2.0 PS Shocks

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

PR402-2

BDS Suspension is now shipping lift options for the 2021 Ford Super Duty trucks allowing you to improve the capability and performance with with room for larger tires. Available kits include:

2.5" Radius Arm and Coilover Kits: build for performance and ride quality without going sky-high, these 2.5" radius arm options lift and level the stance with clearance for 35" tires. A pair of tubular radius arms offer improved strength and caster adjustment over the factory thin stamped steel arms. Standard kits use ProRide coil springs and your choice of NX2-series or FOX 2.0-series gas shocks while the performance option is to convert over to FOX 2.5 factory series coilovers with remote reservoir paired with FOX 2.0 shocks at each corner. To correct the front axle lateral positioning a heavy duty adjustable track bar bolts in place of the factory track bar frame mount. In the rear these kits use a 1" bolt-in lift block and longer u-bolts.

4" Radius Arm, 4-Link and Coilover Kits: A popular option for the late model Super Duty, these 4" lift systems allow fitment for 35-37" tires while improving the appearance and capability. The 4" kits are offered in several configurations to include both front heavy duty radius arms as well as a 4-link conversion for improved strength, handling and caster control. Standard kits use 4" ProRide coil springs and your choice of NX2-series or FOX 2.0-series gas shocks while the performance option is to convert over to FOX 2.5 factory series coilovers with remote reservoir paired with FOX 2.0 shocks at each corner. Steering angles are corrected with a forged drop pitman arm with an integrated drag link flip. This is used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets, an OE replacement single NX2 steering stabilizer, replacement rear lift blocks or leaf springs and longer u-bolts to complete the install.

6" Radius Arm, 4-Link and Coilover Kits: Stepping up to the 6" systems, BDS offers systems allow fitment for 37-38" tires while improving the appearance and capability. The 6" kits are offered in several configurations to include both front heavy duty radius arms as well as a 4-link conversion (available soon) for improved strength, handling and caster control. Standard kits use 6" ProRide coil springs and your choice of NX2-series or FOX 2.0-series gas shocks while the performance option is to convert over to FOX 2.5 factory series coilovers with remote reservoir paired with FOX 2.0 shocks at each corner. Steering angles are corrected with a forged drop pitman arm with an integrated drag link flip. This is used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets, an OE replacement single NX2 steering stabilizer, replacement rear lift blocks or leaf springs and longer u-bolts to complete the install. To correct front driveline angles, BDS supplies a high strength transfer case indexing ring to rotate the front output of the transfer case lower. The indexing ring uses ARP studs and includes new mounting hardware. Also supplied is a heavy duty replacement transmission crossmember to allow additional clearance.

Available Accessories: BDS offers a number of kit accessories for the new 2021 Ford Super Duty designed to further enhance the truck's performance. While the standard steering stabilizer is sufficient at controlling from end shimmy caused by oversized tires, BDS also offers a dual steering stabilizer kit that offers better control, steering firmness. Available with your choice of NX2 cylinders or FOX 2.0 50/50 valved gas cylinders these dual steering stabilizer kits help keep you in control with aggressive, oversized tires over rough terrain.

Recoil traction bars improve performance on the street without binding up the rear suspension like most traction bar kits on the market. This revolutionary full float design uses an internal 3000 lb/in compression spring that can be preloaded while installed on the vehicle to offer a range of settings. These kits use vehicle specific mounting brackets designed specifically for the late model F250/F350 with 3.5-4" diameter rear axles.

Take your new 2021 Ford Super Duty to the next level with BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR396-01

BDS Suspension adds next level performance to its F150 lineup with 2" coilover systems for the 2009-2013 and 2014-2020 Ford F150 trucks. These join BDS's existing leveling, 4" and 6" lift options. These new 2” performance leveling systems improve all around vehicle performance and capability with FOX 2.5 factory series remote reservoir coilovers (w/ optional DSC adjustment), BDS performance series upper control arms and your choice of FOX 2.0 performance series or FOX 2.5 factory series piggyback reservoir rear shocks allowing clearance for up to 35" tires. Kits will NOT fit 2021 model Ford F150s, those kits are in development to be released soon.

Product Description

2" Coilover Systems for Ford F150

Vehicle Fitment

2009-2020 Ford F150

Rec'd Wheel/Tire Specs:

35x12.50 Tires on 20x9 Wheels (5.5" BS)

Install Time/Difficulty:

3 Hours / 3 of 5

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Product Information:

2009-2013 F150
#BDS1554FSL - 2" Coilover System (2.0 IFP Front / 2.0 IFP Rear)
#BDS1586F - 2" Coilover System (2.0 IFP Front / 2.0 IFP Rear)
#BDS1586FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.0 IFP rear shocks)
#BDS1554F -2" Coilover System (2.5 R/R Front / 2.5 P/B Rear)
#BDS1554FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.5 P/B Rear)

2014-2020 F150
#BDS1553FSL - 2" Coilover System (2.0 IFP Front / 2.0 IFP Rear)
#BDS1582F - 2" (Coilover System (2.5 R/R Front / 2.0 IFP Rear)
#BDS1582FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.0 IFP Rear)
#BDS1553F - 2" Coilover System (2.5 R/R Front / 2.5 P/B Rear)
#BDS1553FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.5 P/B Rear)

Features/Benefits:

  • FOX 2.0 IFP or 2.5 R/R coilovers for next level shock damping
  • Performance UCAs add strength and increase suspension travel
  • Levels stance with clearance for up to 35" tires
  • Rear FOX 2.0 IFP or 2.5 P/B shocks for improved performance
  • Improved ride quality, control, and capability

Coldwater, MI: BDS Suspension introduces the latest addition to its ever-expanding product lineup for the later model 2014-2020 Ford F150 with new 2" coilover conversion systems in stock and now shipping. Designed to be so much more than just a "leveling kit", these new coilover systems take advantage of the factory suspension geometry without overextending operating angles and offer next level performance in a smaller lift package. At the heart of these new 2" systems are a pair of precision tuned FOX 2.5 factory series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs above. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are your choice of FOX 2.0 IFP or FOX 2.5 factory series piggyback rear gas shocks to match the front and complete the package.

As with all BDS kits, these come ready to install right out the box with all hardware packs and step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your F150 with this new 2" coilover system from BDS Suspension and FOX.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com