8 Responses

  1. Michael Koon
    Michael Koon at | | Reply

    Hello,
    Will there be a six inch suspension lift coming out for the 2019 gmc sierra 1500 at4?

    1. Carter @ BDS Suspension
      Carter @ BDS Suspension at | | Reply

      Hey Michael,
      At this point we don’t have plans for a 6″ kit for the Trail Boss/AT4. Reason being these kits are based off the standard GM1500 suspension lifts which we offer in 4″ and 6″ lift increments. Being the Trail Boss/AT4 comes from the factory with 2″ of lift, our 4″ lift kits sit similar to a 6″ kit for the standard truck which will correct the suspension/steering/drivetrain geometry at that lift height. Going taller that 4″ on the Trail Boss/AT4 the rest of these kit components may effect handling, limit droop travel and may lead to premature wear of components caused by more extreme operating angles. For more on the topic our sales/tech support team is available at (517) 279-2135

  2. Michael Koon
    Michael Koon at | | Reply

    Hello,
    Would the four inch lift be added on top of the two inch lift that comes with the AT4 or will it only be a four inch lift total?

    1. Carter @ BDS Suspension
      Carter @ BDS Suspension at | | Reply

      Hi Michael, we touch on that in the announcement above. Up front the 4″ strut spacer is added to the 2″ taller OE struts, while its only 4″ of lift on a Trail Boss/AT4, its similar to the ride height of a standard Silverado/Sierra with 6″ of lift on it. In the back we replace the factory Trail Boss/AT4 lift block with a taller 5″ lift block to level the stance.

  3. Koby Short
    Koby Short at | | Reply

    Does this kit retain factory track width? If not, how much will it increase per side? Thanks.

    1. Carter @ BDS Suspension
      Carter @ BDS Suspension at | | Reply

      Hey Koby,
      similar to my response on your other comments the track width change on our 2019 GM1500 4″/6″ IFS Kits is just under 1/2″ per side

  4. Israel Meneses
    Israel Meneses at | | Reply

    Hello,

    I’m just wondering fresh out of the Sema show is there any plans on regarding BDS Suspension 4″ with Fox Coil-Over such as you’re had for 2014-2018 kits but for 2019-2020 AT4/Trailboss

    Thanks

    1. Carter @ BDS Suspension
      Carter @ BDS Suspension at | | Reply

      Hey Israel, we will be offering FOX 2.5 RR Coilover options for the 2019 GM1500 trucks in the near future to pair with out kits. As soon as they hit the shelf ready to sell we’ll be adding them to our website and sending out announcements, keep an eye out for more info as they come available.

Leave a Reply