5 Responses

  1. MARK DOWSWELL
    MARK DOWSWELL at | | Reply

    I AM WANTING TO INSTALL THIS ON A 2019 RAM REBEL W/O AIR RIDE IS THERE GOING TO BE ANY ISSUES WITH TRACTION CONTROL
    1637F IS PART NUMBER AT GRANDWEST WHICH IS MY CANADIAN SUPPLIER THE PART NUMBER IS 1637FS ARE THESE THE SAME THING?

    1. Carter @ BDS Suspension
      Carter @ BDS Suspension at | | Reply

      Hey Mark, our kits are designed to integrate with the stock ESC system. Grand West will be able to service you with the sales/install.

      1637H uses the standard (base) kit with front strut spacers and BDS NX2 rear shocks
      1637FS uses the standard (base) kit with front strut spacers and FOX 2.0 rear shocks
      1637F uses the same base components and upgrades to FOX 2.5 RR front coilovers and FOX 2.0 rear shocks

  2. Michael Fulk
    Michael Fulk at | | Reply

    Checking on release of lift systems for 2020 Ram Rebel w/o air ride, 4″ or 6″? Will the 4′ only be available with spacer vs. coil over option? With either will factory 18″ Rebel wheels work with these kits? Thanks!

    1. Carter @ BDS Suspension
      Carter @ BDS Suspension at | | Reply

      Hey Michael,
      Both the 4″ and 6″ kits use the same base components (crossmembers, differential relocation, steering knuckles, etc). Currently we’re only planning to offer the coilovers pre-set for 6″ of lift. That said the preload collar on these coilovers can be adjusted to set the ride height around 4.5″ of lift if you choose to do so using a spanner wrench (ours is #129600). For more on that topic contact BDS sales/customer service at (517) 279-2135 or reach out to your local BDS dealer (https://bds-suspension.com/distributor-lookup). With both kits replacement steering knuckles are provided to correct steering angles to ESC system compatibility. Due to the new steering arm mount factory 17-18″ wheels cannot be bolted back on due to the large factory backspacing. While we always recommend using aftermarket wheels with the correct 4.5-5″ backspacing, wheel spacers are another option to achieve our recommended backspacing measurement with your factory wheels.

      In additional option to keep in mind, along with the 4″ and 6″ kits we offer currently, we’ll also be offering a 2.5″ coilover system for these trucks very soon as well. We’ll have more info on the kit once available, but you can see a sneak peek of it from our SEMA booth video at https://www.youtube.com/watch?v=mwoR4OwJfSE (skip ahead to 1:42)

  3. Michael Fulk
    Michael Fulk at | | Reply

    Awesome!

Leave a Reply