4" Radius Arm Systems | 2019+ RAM 3500 Trucks | NPA #373

BDS Suspension is now shipping complete 4" radius arm systems for the 2019+ RAM 3500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms, progressive rate coil springs, your choice of gas shocks, steering correction and more allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 4" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

4" Radius Arm Systems for 2019+ RAM 3500 Trucks

2019 RAM 3500 Diesel 4WD

Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
High strength progressive rate front coil springs for a great ride on any terrain
F/R HD track bar relocation brackets to correctly position both axles under the truck
Forged drop pitman arm to corect steering angles
F/R sway bar correction to maintain handling performance
HD transmission crossmember and t-case indexing ring to correct front driveline angles
BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
Allows clearance for up to 37” tires

T-case indexing ring available for 6-bolt and 8-bolt equipped models, check vehicle before ordering
Will not fit rear air-ride equipped models
Kit designed for diesel models only

*Attn State of California consumers: Prop 65 Warning

37x12.50 Tires on 17x9/18x9/20x9 Wheels (5.625" BS)
35x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5" BS)

7-8 Hours / 4 of 5

#694H - 2" Leveling Kit for '19+ RAM 3500 Trucks
#1660H - 4" Radius Arm Systems for '19 RAM 2500 4WD
#BDS082405 - Drop Pitman Arm

6Bolt Tcase
#1656H - 4" Radius Arm System w/o Overload - Diesel - NX2 Shocks - $2,123.78
#1656FS - 4" Radius Arm System w/o Overload - Diesel - FOX Shocks - $2,525.74
#1657H - 4" Radius Arm System w/ Overload - Diesel - NX2 Shocks - $2,123.78
#1657FS - 4" Radius Arm System w/ Overload - Diesel - FOX Shocks - $2,525.74

8Bolt Tcase
#1658H - 4" Radius Arm System w/o Overload - Diesel - NX2 Shocks - $2,123.78
#1658FS - 4" Radius Arm System w/o Overload - Diesel - FOX Shocks - $2,525.74
#1659H - 4" Radius Arm System w/ Overload - Diesel - NX2 Shocks -,$2,123.78
#1659FS - 4" Radius Arm System w/ Overload - Diesel -FOX Shocks - $2,525.74

5-year, 60,000 mile drivetrain Warranty
BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Standard Kit Installed

Coldwater, MI: BDS Suspension expands its listings for the late model 2019+ RAM 3500 4WD Diesel trucks with new 4" radius arm systems that are on the shelf ready to ship. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (diesel specific) progressive rate 4" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to recenter the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. BDS offers these indexing rings for both the 6-bolt and 8-bolt equipped trucks. In the rear of the RAM 3500 kits a 3" block and u-bolt kit is used for a level-to-slightly tail-high stance while maintaing tow capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 4" radius arm systems from BDS Suspension.