![\"PR391X-1\"](\"https:\/\/eadn-wc04-6979468.nxedge.io\/wp-content\/uploads\/2020\/09\/PR391X-1-e1601048531254.jpg\" "\\"PR391X-1\\"")
\n\t\t\tImprove the stance and performance of your new Super Duty with the BDS 6″ radius arm system. These systems improve ground clearance with room for 38″ tires while maintaining vehicle handling and performance. Kits include full length coils and multiple rear spring configurations, HD radius arms, steering correction and your choice of gas shocks. As with all kits these new kits are backed by Factory Protection Plus for BDS’s no fine print warranty and 5-year, 60,000-mile drivetrain warranty so you can go with confidence.<\/p>\n\t
Product Description<\/h3>\nBDS 6″ Radius Arm Systems for 2020 Super Duty
\nBDS 6″ Radius Arm Coilover Systems for 2020 Super Duty\n\tProduct Info<\/h3>\n6″ Radius Arm Systems:
\n<\/strong>BDS1561H – 6″ Radius Arm System w\/ rear block (NX2)
\nBDS1561FS – 6″ Radius Arm System w\/ rear block (FOX)
\nBDS1562H – 6″ Radius Arm System w\/ rear spring (NX2)
\nBDS1562FS – 6″ Radius Arm System w\/ rear spring (FOX)\n6″ Radius Arm Coilover Systems:<\/strong>
\nBDS1561F – 6″ Radius Arm C\/O System w\/ rear block
\nBDS1561FDSC – 6″ Radius Arm DSC C\/O System w\/ rear block
\nBDS1562F – 6″ Radius Arm C\/O System w\/ full spring
\nBDS1562FDSC – 6″ Radius Arm DSC C\/O System w\/ full spring\n\tAvailable Accessories<\/h3>\n#55380 & #85429 (Dual NX2 Steering Stabilizer Kit)
\n#55380 + #98223010 (Dual FOX Steering Stabilizer Kit)
\n#123203 (Adjustable Track Bar Kit)
\n#123402 (Carrier Bearing Drop Kit)
\n#123005 (Rear Sway Bar Link Kit)
\n#123416 + #123409 (Recoil Traction Bars 3.5-4″ Axle Dia)
\n#123426 + #123409 (Recoil Traction Bars 4.5″ Axle Dia)\n\tRecommended Wheel\/Tire Specs<\/h3>\n38×13.50 tires with 17×9, 18×9, 20×9 wheels and 4.5-5″ BS
\n38×13.50 tires with 17×10, 18×10, 20×10 wheels and 5″ BS\n\tVehicle Fitment<\/h3>\n2020 Ford F250 Super Duty 4WD Diesel
\n2020 Ford F350 Super Duty 4WD Diesel SRW\/DRW\n\tInstall Time\/Difficulty<\/h3>\n
6-8 Hours \/ 4 of 5<\/p>\n\t
Important Notes<\/h3>\n\n- Fits diesel models only<\/li>\n
- Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.<\/li>\n
- If equipped with a 2-piece rear driveshaft, a carrier bearing drop kit may be required<\/li>\n
- Trucks equipped with a factory rear sway bar should upgrade rear links (#123005)<\/li>\n
- Indexing ring has not been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required.<\/li>\n
- Attn State of California consumers: Prop 65 Warning<\/li>\n<\/ul>\n\t
![\"Factory](\"https:\/\/eadn-wc04-6979468.nxedge.io\/wp-content\/uploads\/2019\/04\/fpp.png\")
<\/a>\n\n \t- 5-year, 60,000 mile drivetrain Warranty<\/li>\n\t
- BDS\u2019s exclusive No Fine Print Warranty<\/li>\n<\/ul>\n\t
***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***<\/em><\/p>\n\tColdwater, MI:<\/strong> BDS Suspension adds 6″ radius arm systems to its lineup of products for the 2020 Ford Super Duty trucks. Available in coil spring and coilover configurations along with rear lift blocks or replacement leaf springs options, BDS has several new 6″ lift systems available to build the kit to meet your performance needs with clearance for 38″ tires.<\/p>\n6″ Radius Arm Kits –<\/strong> BDS raises the bar with 6″ radius arm systems for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6″ ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6″ of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6″ lift systems BDS offers the your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity and will limit any potential axle wrap during hard acceleration. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance.<\/p>\n6″ Radius Arm Coilover Kits:<\/strong> Up the ante with the BDS 6″ radius arm coilover system for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. This systems take performance to the next level with FOX 2.5 factory series remote reservoir coilovers. The coilovers are pre-tuned for optimal performance and are available with optional DSC adjustment. These bolt into place using the supplied mounting brackets and pair with a set of FOX 2.0 performance series gas shocks. Additionally a forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6″ of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6″ lift systems BDS offers the your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.<\/p>\n <\/p>\n
\n\t\tMedia Gallery\n\t<\/h3>\n\t\t\t\t\n\t\t\t\t![\"fk_1561H.jpg\"](\"https:\/\/bds-suspension.com\/images-prod\/fk\/med\/fk_1561H.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\t6″ RA Kit w\/ rear block<\/a><\/p>\n\t\t\t\t\n\t\t\t\t![\"fk_1562H.jpg\"](\"https:\/\/bds-suspension.com\/images-prod\/fk\/med\/fk_1562H.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\t6″ RA Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t\n\t\t\t\t![\"Ford-F250-2020-B6-1.jpg\"](\"https:\/\/bds-suspension.com\/images-prod\/apps\/ford\/med\/Ford-F250-2020-B6-1.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\tF250 w\/ 6″ Kit Installed<\/a><\/p>\n\t\t\t\t\n\t\t\t\t![\"fk_1561F.jpg\"](\"https:\/\/bds-suspension.com\/images-prod\/fk\/med\/fk_1561F.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\t6″ RA C\/O Kit w\/ rear block<\/a><\/p>\n\t\t\t\t\n\t\t\t\t![\"fk_1562F.jpg\"](\"https:\/\/bds-suspension.com\/images-prod\/fk\/med\/fk_1562F.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\t6″ RA C\/O Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t\n\t\t\t\t![\"Ford-F250-2020-B6-7.jpg\"](\"https:\/\/bds-suspension.com\/images-prod\/apps\/ford\/med\/Ford-F250-2020-B6-7.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\tF250 w\/ 6″ Kit Installed <\/a><\/p>\n\t\t\t\t\n\t\t\t\t![\"PR391X-2\"](\"https:\/\/eadn-wc04-6979468.nxedge.io\/wp-content\/uploads\/2020\/09\/PR391X-2.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\tSocial Media #1<\/a><\/p>\n\t\t\t\t\n\t\t\t\t![\"PR391X-3\"](\"https:\/\/eadn-wc04-6979468.nxedge.io\/wp-content\/uploads\/2020\/09\/PR391X-3.jpg\" "\\"\\"")
\n\t\t\t\t<\/a>\n\tSocial Media #2<\/a><\/p>\n\t\u00a9 BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
\n(517) 279-2135 | bds-suspension.com<\/a> | sales-bds@ridefox.com<\/a>\n","protected":false},"excerpt":{"rendered":"BDS raises the bar with 6″ radius arm systems for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6″ ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. […]<\/p>\n
\n<\/strong>BDS1561H – 6″ Radius Arm System w\/ rear block (NX2)
\nBDS1561FS – 6″ Radius Arm System w\/ rear block (FOX)
\nBDS1562H – 6″ Radius Arm System w\/ rear spring (NX2)
\nBDS1562FS – 6″ Radius Arm System w\/ rear spring (FOX)\n6″ Radius Arm Coilover Systems:<\/strong>
\nBDS1561F – 6″ Radius Arm C\/O System w\/ rear block
\nBDS1561FDSC – 6″ Radius Arm DSC C\/O System w\/ rear block
\nBDS1562F – 6″ Radius Arm C\/O System w\/ full spring
\nBDS1562FDSC – 6″ Radius Arm DSC C\/O System w\/ full spring\n\t
Available Accessories<\/h3>\n#55380 & #85429 (Dual NX2 Steering Stabilizer Kit)
\n#55380 + #98223010 (Dual FOX Steering Stabilizer Kit)
\n#123203 (Adjustable Track Bar Kit)
\n#123402 (Carrier Bearing Drop Kit)
\n#123005 (Rear Sway Bar Link Kit)
\n#123416 + #123409 (Recoil Traction Bars 3.5-4″ Axle Dia)
\n#123426 + #123409 (Recoil Traction Bars 4.5″ Axle Dia)\n\tRecommended Wheel\/Tire Specs<\/h3>\n38×13.50 tires with 17×9, 18×9, 20×9 wheels and 4.5-5″ BS
\n38×13.50 tires with 17×10, 18×10, 20×10 wheels and 5″ BS\n\tVehicle Fitment<\/h3>\n2020 Ford F250 Super Duty 4WD Diesel
\n2020 Ford F350 Super Duty 4WD Diesel SRW\/DRW\n\tInstall Time\/Difficulty<\/h3>\n
\n38×13.50 tires with 17×10, 18×10, 20×10 wheels and 5″ BS\n\t
Vehicle Fitment<\/h3>\n2020 Ford F250 Super Duty 4WD Diesel
\n2020 Ford F350 Super Duty 4WD Diesel SRW\/DRW\n\tInstall Time\/Difficulty<\/h3>\n
6-8 Hours \/ 4 of 5<\/p>\n\t
Important Notes<\/h3>\n\n- Fits diesel models only<\/li>\n
- Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.<\/li>\n
- If equipped with a 2-piece rear driveshaft, a carrier bearing drop kit may be required<\/li>\n
- Trucks equipped with a factory rear sway bar should upgrade rear links (#123005)<\/li>\n
- Indexing ring has not been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required.<\/li>\n
- Attn State of California consumers: Prop 65 Warning<\/li>\n<\/ul>\n\t<\/a>\n
\n \t- 5-year, 60,000 mile drivetrain Warranty<\/li>\n\t
- BDS\u2019s exclusive No Fine Print Warranty<\/li>\n<\/ul>\n\t
***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***<\/em><\/p>\n\tColdwater, MI:<\/strong> BDS Suspension adds 6″ radius arm systems to its lineup of products for the 2020 Ford Super Duty trucks. Available in coil spring and coilover configurations along with rear lift blocks or replacement leaf springs options, BDS has several new 6″ lift systems available to build the kit to meet your performance needs with clearance for 38″ tires.<\/p>\n6″ Radius Arm Kits –<\/strong> BDS raises the bar with 6″ radius arm systems for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6″ ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6″ of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6″ lift systems BDS offers the your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity and will limit any potential axle wrap during hard acceleration. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance.<\/p>\n6″ Radius Arm Coilover Kits:<\/strong> Up the ante with the BDS 6″ radius arm coilover system for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. This systems take performance to the next level with FOX 2.5 factory series remote reservoir coilovers. The coilovers are pre-tuned for optimal performance and are available with optional DSC adjustment. These bolt into place using the supplied mounting brackets and pair with a set of FOX 2.0 performance series gas shocks. Additionally a forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6″ of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6″ lift systems BDS offers the your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.<\/p>\n <\/p>\n
\n\t\tMedia Gallery\n\t<\/h3>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\t6″ RA Kit w\/ rear block<\/a><\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\t6″ RA Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\tF250 w\/ 6″ Kit Installed<\/a><\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\t6″ RA C\/O Kit w\/ rear block<\/a><\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\t6″ RA C\/O Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\tF250 w\/ 6″ Kit Installed <\/a><\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\tSocial Media #1<\/a><\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t<\/a>\n\tSocial Media #2<\/a><\/p>\n\t\u00a9 BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
\n(517) 279-2135 | bds-suspension.com<\/a> | sales-bds@ridefox.com<\/a>\n","protected":false},"excerpt":{"rendered":"BDS raises the bar with 6″ radius arm systems for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6″ ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. […]<\/p>\n
<\/a>\n- \n \t
- 5-year, 60,000 mile drivetrain Warranty<\/li>\n\t
- BDS\u2019s exclusive No Fine Print Warranty<\/li>\n<\/ul>\n\t
***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***<\/em><\/p>\n\t
Coldwater, MI:<\/strong> BDS Suspension adds 6″ radius arm systems to its lineup of products for the 2020 Ford Super Duty trucks. Available in coil spring and coilover configurations along with rear lift blocks or replacement leaf springs options, BDS has several new 6″ lift systems available to build the kit to meet your performance needs with clearance for 38″ tires.<\/p>\n
6″ Radius Arm Kits –<\/strong> BDS raises the bar with 6″ radius arm systems for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6″ ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6″ of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6″ lift systems BDS offers the your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity and will limit any potential axle wrap during hard acceleration. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance.<\/p>\n
6″ Radius Arm Coilover Kits:<\/strong> Up the ante with the BDS 6″ radius arm coilover system for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. This systems take performance to the next level with FOX 2.5 factory series remote reservoir coilovers. The coilovers are pre-tuned for optimal performance and are available with optional DSC adjustment. These bolt into place using the supplied mounting brackets and pair with a set of FOX 2.0 performance series gas shocks. Additionally a forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6″ of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6″ lift systems BDS offers the your choice of replacement rear lift blocks or replacement GlideRide leaf springs. Either option will level out the stance, the spring replacement has the added benefits of an integrated overload leaf for additional load capacity. Additionally high strength black e-coated u-bolts are supplied along with a pair of matching FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.<\/p>\n
<\/p>\n
\n\t\tMedia Gallery\n\t<\/h3>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\t6″ RA Kit w\/ rear block<\/a><\/p>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\t6″ RA Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\tF250 w\/ 6″ Kit Installed<\/a><\/p>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\t6″ RA C\/O Kit w\/ rear block<\/a><\/p>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\t6″ RA C\/O Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\tF250 w\/ 6″ Kit Installed <\/a><\/p>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\tSocial Media #1<\/a><\/p>\n\t\t\t\t\n\t\t\t\t
\n\t\t\t\t<\/a>\n\tSocial Media #2<\/a><\/p>\n\t\u00a9 BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
\n(517) 279-2135 | bds-suspension.com<\/a> | sales-bds@ridefox.com<\/a>\n","protected":false},"excerpt":{"rendered":"BDS raises the bar with 6″ radius arm systems for the late model Super Duty. These 6″ systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6″ ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. […]<\/p>\n
![6″ RA Kit w\/ rear block<\/a><\/p>\n\t\t\t\t](\"https:\/\/bds-suspension.com\/images-prod\/fk\/print\/fk_1561H.jpg\"){kind=link}
![6″ RA Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t](\"https:\/\/bds-suspension.com\/images-prod\/fk\/print\/fk_1557H.jpg\"){kind=link}
![F250 w\/ 6″ Kit Installed<\/a><\/p>\n\t\t\t\t](\"https:\/\/bds-suspension.com\/images-prod\/apps\/ford\/print\/Ford-F250-2020-B6-1.jpg\"){kind=link}
![6″ RA C\/O Kit w\/ rear block<\/a><\/p>\n\t\t\t\t](\"https:\/\/bds-suspension.com\/images-prod\/fk\/print\/fk_1520F-1524F-01.jpg\"){kind=link}
![6″ RA C\/O Kit w\/ rear spring<\/a><\/p>\n\t\t\t\t](\"https:\/\/bds-suspension.com\/images-prod\/fk\/print\/fk_1562F.jpg\"){kind=link}
![F250 w\/ 6″ Kit Installed <\/a><\/p>\n\t\t\t\t](\"https:\/\/bds-suspension.com\/images-prod\/apps\/ford\/print\/Ford-F250-2020-B6-7.jpg\"){kind=link}