Many of the 2016 Chevy/GMC HD trucks came from the factory without a steering stabilizer installed. Common on stock height and lifted trucks, a steering stabilizer helps reduce the front end shimmy caused by oversized tires. BDS Suspension is now offering an upgrade for the 2016 model Chevy and GMC 2500/3500HD trucks with a new single steering stabilizer kit designed to improve handling and drivability. The kit includes a new frame mounted dual shear stabilizer bracket and hardware to secure the BDS NX2 series single steering stabilizer to the previous position over the center link. The design works with stock and lifted trucks that use the center link in the stock location. This steering stabilizer kit is compatible with all BDS lift kits and most other lift kits on the market for the 2016 Chevy/GMC HD trucks. Upgrade your HD with this new accessory from BDS Suspension.

2016 HD Steering Stabilizer Kit
2016 HD Steering Stabilizer Kit
2016 HD Steering Stabilizer Kit

Product Description

Single NX2 Steering Stabilizer Kit

Vehicle Fitment

  • 2016 Chevy/GMC 2500HD 2WD/4WD
  • 2016 Chevy/GMC 3500HD 2WD/4WD

HD Stabilizer Features

  • Reduces front end shimmy caused by oversized tires
  • Improves handling/driveability on all terrains
  • Words with stock or lifted applications.

Kit ID Number(s)

#55379 (Mounting Kit)
#85430 (NX2 Stabilizer)


$31.50  (#55379)
$63.53 (#85430)

Important Notes

Fits 2016 models without OEM steering stabilizer only
Fits stock and lifted trucks with stock center link only


© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | |

13 Comments on “BDS New Product Announcement #260: 2016 GM2500 Steering Stabilizer Kit
  • Andy says:

    I purchased this kit for my 3500HD SRW Duramax and the rivet nuts do not fit the hole. The hole is 3/4 of and inch and the rivet nuts are 11/16 of an inch. Any input? I have looked locally for the correct parts but no luck so far.

  • Mitch says:

    Does this fit 2017 models?

    • Carter @ BDS Suspension says:

      Hey Mitch, this stabilizer upgrade will fit the 2017 HD models not equipped with a factory stabilizer as well.

  • William Clark says:

    Does this kit work in conjunction with the cognition steering brace kit?

    • Carter @ BDS Suspension says:

      Hey William,
      Our steering stabilizer kit will work in conjunction with the Cognito idler/steering brace kit

    • mike mcclendon says:


      Hello i have the 4″ cognito lift box kit with steering braces. Did this stabilizer work for you
      just called cognito and they are intrigued as to what is going on with this product.

  • Hamed says:

    Do u have a kit which fits 2014 Sierra Denali 1500? My truck is lifted 3”

  • Robert Ode says:

    Do you sell the bracket kit by itself a d will it work with the bilstein stabilizer

    • Carter @ BDS Suspension says:

      We sure do Robert, the stabilizer bracket is #55379 listed above. As far as compatibility with a Bilstein stabilizer I’m not able to answer that, it would depend on the dimensions of the stabilizer you are trying to install. A pressurized gas-charged cylinder isn’t recommended unless it has 50/50 valving to ensure it doesn’t great a push/pull effect on the steering.

  • Sam says:

    Will it work on a 2016 2500 work truck 2 wheel drive

    • Carter @ BDS Suspension says:

      Hey Sam, this steering stabilizer kit fits all 2016+ Chevy/GMC HD trucks, 2WD and 4WD (see listing under vehicle fitment)


Leave a reply

Your email address will not be published. Required fields are marked *