PR405-1

BDS Suspension is now shipping lift systems for the 2021 Jeep Wrangler JL. These kits are designed for improved on/off-road performance and clearance up to 37” tires. Designed to not only lift, but enhance the new Wrangler JL’s all around performance, these new systems come complete and ready to perform right out of the box with ProRide coil springs, NX2 or FOX 2.0 gas shocks, sway bar disconnects, heavy duty front track and rear track bar bracket, caster correction and more.

Product Description

Lift Systems & Accessories for
2021 Jeep Wrangler JL

Vehicle Fitment

2018-2021 Jeep Wrangler JL 4Dr 2018-2021 Jeep Wrangler JL 2Dr

Kit Info

#1435H/FS - (4Dr) 2" Lift System
#1437H/FS - (4Dr) 3" Lift System
#1438H/FS - (2Dr) 3" Lift System

Available Accessories

BDS85432 - NX2 Stabilizer (x1)
FOX98524173 - FOX Stabilizer (x1)
FOX98302148 - FOX ATS Stabilizer
BDS55381 – Dual Stabilizer Bracket
BDS85429 - NX2 Stabilizer (x2)
FOX98224429 - FOX Stabilizer (x2)
BDS124453 – Adj Front Track Bar
BDS124344 – Adj Front UCA Kit
BDS124343 – Adj Front LCA Kit
BDS124346 – Adj Rear UCA Kit
BDS124467 – Adj Rear LCA Kit
BDS124466 – Fixed Rear LCA Kit
NX2 Shocks/Stabilizers
FOX 2.0 Perf Shocks/Stabilizers

Important Notes

Non-Rubicon comes from factory at lower ride height, will net slightly more lift final stance the same for all models

Not approved for 4xe models

Not approved for Rubicon 392 models

Stock wheels cannot be reinstalled without spacers due to rear sway bar interference.

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

BDS Suspension has several new kits in the development for the 2018-2021 Jeep Wrangler and Wrangler Unlimited JL. Designed to not only lift, but enhance the new Wrangler JL’s all around performance, these systems come complete and ready to perform right out of the box. At each corner replacement 2Dr or 4Dr JL-specific ProRide coil springs are supplied to mimic the factory ride and spring rate. These springs provide additional ride height, along with allowing for increased suspension travel. They are paired to your choice of specially tuned NX2-series gas or FOX 2.0 performance series IFP gas shocks to offer a smooth ride and better damping in rough terrain.

As with all BDS Suspension products these are backed by Factory Protection Plus offering safety and security with a limited lifetime warranty and ESC system compatibility along with 5-year, 100,000-mile extended drivetrain warranty. Go with confidence and get more out of your new late model Jeep Wrangler JL with BDS Suspension.

Media Gallery

2" Lift Systems for 2018-2021 Jeep Wrangler JL
3" Lift Systems for 2018-2021 Jeep Wrangler JL
3" Lift Systems for 2018-2021 Jeep Wrangler JL

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension is shipping 3" lift systems and accessories for the 2020 Jeep Gladiator JT designed for improved on-road/offroad performance and clearance up to 37” tires. Designed to not only lift, but enhance the Gladiator JT's all around performance, these new systems come complete and ready to perform right out of the box with ProRide front and rear coil springs to lift and level the stance, your choice of gas shocks, sway bar disconnects, heavy duty front track bar, caster correction and more. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty.

Product Description

BDS 3" Lift Systems for Jeep Gladiator JT

Vehicle Fitment

2020 Jeep Gladiator JT - All Trim Levels

Product Info

BDS1439H - 3" Lift System w/ NX2 Shocks
BDS1439FS - 3" Lift System w/ FOX Shocks

Available Accessories

#BDS124343 - HD Front Lower Control Arms - Adjustable
#BDS124344 - HD Front Upper Control Arms - Adjustable
#BDS85432 - BDS NX2 Single Steering Stabilizer Kit
#FOX98524173 - FOX 2.0 IFP Single Steering Stabilizer Kit
#FOX98502127 - FOX 2.0 TS Single Steering Stabilizer Kit
#FOX98302148 - FOX 2.0 ATS Single Steering Stabilizer Kit
#BDS55381 & #BDS85429 - BDS Dual Steering Stabilizer Kit - NX2
#BDS55381 & #FOX98224429 - BDS Dual Steering Stabilizer Kit - FOX

Features/Benefits

  • F/R ProRide coil springs offer improved ride quality and more articulation
  • Sway bar quicker disconnects and extended rear link for improved offroad flex
  • Front HD track bar to correction position the front axle and control lateral movement
  • Lower cam locks to correct caster for alignment
  • Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping

Install Time/Difficulty

5-6 Hours / 3 of 5

Recommended Wheel/Tire Specs

33x12.50 tires with 17x8 wheels and Stock BS Sport Model No Rubbing
35x12.50 tires with 17x8 wheels and 4.5-5" BS Sport Model Rubbing under articulation
37x12.50 tires with 17x8 wheels with Stock BS Rubicon No Rubbing
37x12.50 tires with 17x8 wheels with 4.5-5" BS Rubicon Rubbing under extreme articulation

Important Notes

  • Non-Rubicon comes from factory at lower ride height, will net slightly more lift final stance the same for all models
  • Attn State of California consumers: Prop 65 Warning
Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension is shipping 3” lift systems and accessories for the 2020 Jeep Gladiator, specially designed for improved on-road ride quality and handling while taking offroad capability to the next level with clearance for up to 37” tires. Designed to not only lift, but enhance the new Wrangler JL’s all around performance, these new 3" systems come complete and ready to perform right out of the box. At each corner replacement ProRide coil springs, 3" in front and 1.25" in rear to level the stance. These springs provide additional ride height, along with allowing for increased suspension travel. The rear springs are dual rate to improve load capacity. They are paired to your choice of specially tuned NX2-series gas or FOX 2.0 performance series IFP gas shocks to offer a smooth ride and better damping in rough terrain. Along with the new coil springs and gas shocks, these 3" kits include front and rear bump stop extensions to properly limit suspension up travel. A heavy duty, pinch-bolt style adjustable front track bar is utilized to recenter the front axle and eliminate any unwarranted side-to-side movement. Front caster correct is provided by a set of lower cam lock washers or upgrade to the available HD adjustable control arms for more strength and adjustability. JKS quicker disconnects are supplied with the kit to unlock the front suspension’s potential to flex while maintaining quiet on road operation with a heavy duty adjustable design and spherical bushings. Along with the sway bar disconnects bolt-on mounting posts are supplied for each side to easily store the sway bar up out of the way when hitting the trail. In the rear extended length sway bar links are supplied to keep the sway bar at the optimal operating angle and allow more droop travel when paired with matching rear NX2-series or FOX 2.0 performance series shocks.

As with all BDS Suspension products these are backed by Factory Protection Plus offering safety and security with a limited lifetime warranty and ESC system compatibility along with 5-year, 100,000-mile extended drivetrain warranty. Go with confidence and get more out of your new Jeep Gladiator JT with BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR365-1

BDS is now offering heavy duty adjustable front track bars specially designed for the late model Jeep Wrangler JL and Gladiator JT vehicles. These new track bars are a massive upgrade to the factory units, to correctly position the front axle under your Jeep at a wide range of lift heights. Constructed from high strength 1.5" OD x .625-wall tubing, these track bars have a gusseted end and durometer specific bushings to handle whatever on-road and off-road abuse you can through at it. Unlike other adjustable track bars on the market, this threaded double adjustment collar allows you to easily make changes while the track bar is already installed on the vehicle and is designed for use with 0-4.5" of lifted JL/JT models and compatible with most kits on the market. Locking in the length, is a cinch with the reliably pinch bolt style clamp provided. This track bar is formed for proper clearance around critical front end components and is designed to easy bolt-on installation. Both ends use OE style bushings for durability and quiet operation. This track bar comes with a high quality textured black powdercoat finish for a great look and excellent corrosion resistance. Upgrade your JL/JT track bar with this HD adjustable replacement from BDS Suspension.

Product Description

HD Front Adjustable Track Bar Kit for Jeep JL/JT

Vehicle Fitment

2018-2020 Jeep Wrangler JL 4 Door - All Models
2018-2020 Jeep Wrangler JL 2 Door - All Models
2020 Jeep Gladiator JT - All Models

Kit Info

#124453 - (HD Adjustable Track Bar) - $294.74 MSRP

Install Time / Difficulty

1 Hour / 2 of 5

Features /  Benefits

- Heavy wall 5/16" x 1.5" OD tubular construction, precision formed for clearance
- Adjustable design for use with 0-4.5" of lift on JL/JT
- OE-replacement bolt-in design
- Threaded double adjustment collar allows easy adjustment on vehicle without the need to remove from vehicle
- Pinch bolt style clamp to to secure track bar position
- Durable textured black finish

Related Kits/Products

#1435H - 2" Lift Kit (Wrangler JL 4Dr)
#1436H - 2" Lift Kit (Gladiator JT)

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

Media Gallery

HD Front Adjustable Track Bar Kit for Jeep JL/JT
HD Front Adjustable Track Bar Kit for Jeep JL/JT Installed
HD Front Adjustable Track Bar Kit for Jeep JL/JT Installed

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR363-1

Upgrade the weak factory control arms on your Jeep Wrangler JL or Gladiator JT with these new heavy duty replacements from BDS Suspension. Designed as a bolt-in upgrade these front lower control arms add strength and adjustability to your stock or lifted Jeep JL/JT. Thee arms are built from thick wall tubing and specially formed to maximize tire clearance. At the axle end they utilize a OE-style rubber bushing for long service-free operation and better isolation of NVHs. At the frame mount they feature a large forged flex end for strength, durability and offroad articulation. The forged flex ends allow length adjustments to correctly positon the front axle and correct caster. They are capable of 15-degrees of misalignment in either direction for more flex out on the trail and are finished in a durable textured black powdercoat. As with all BDS products, these arms are backed by the No Fine Print Warranty so you can use it abuse it. Upgrade your JL or JT's front lower control arms with BDS Suspension.

Product Description

Front Adjustable LCA Kit for Jeep JL/JT

Vehicle Fitment

2018-2020 Jeep Wrangler JL 4 Door
2018-2020 Jeep Wrangler JL 2 Door
2020 Jeep Gladiator JT

Install Time / Difficulty

1 Hour / 2 of 5

Kit Info

#124343 - Front Adjustable LCA Kit for Jeep JL/JT - $368.41

Features /  Benefits

- Heavy duty construction, formed to improve ground clearance.
- Fully welded ends with factory-style rubber bushing and large forged flex end
- Designed for 0-5" lifts to correct front axle positioning and caster.
- Finished in durable textured black powder coat.
- Fully assembled, ready to install

Related Kits/Products

#124344 - Front Adjustable Upper Control Arms
#124466 - Rear Lower Control Arms (JL only)
#124467 - Rear Adjustable Lower Control Arms (JL only)

Important Notes

- Designed for use with 0-5" of lift
- Attn State of California consumers: Prop 65 Warning

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

Media Gallery

Adjustable Front Lower Control Arm Kit for Jeep JL/JT

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR361-a copy

BDS Suspension is now shipping 3" lift systems for the 2018-2020 Jeep Wrangler and Wrangler Unlimited JL market designed for improved on-road/offroad performance and clearance up to 37” tires. Designed to not only lift, but enhance the new Wrangler JL’s all around performance, these new systems come complete and ready to perform right out of the box with ProRide coil springs, NX2 of FOX 2.0 gas shocks, sway bar disconnects, heavy duty front track and rear track bar bracket, caster correction and more. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty.

Product Description

3" Lift Systems for 2018-2020 Jeep Wrangler JL

Vehicle Fitment

2018-2020 Jeep Wrangler JL 4 Door 4WD
2018-2020 Jeep Wrangler JL 2 Door 4WD

Kit Info

#1437H - (4Door) 3" Lift System with NX2 Shocks
$1,130.15 MSRP

#1437FS - (4Door) 3" Lift System with FOX 2.0 Shocks
$1,572.27 MSRP

#1438H - (2Door) 3" Lift System with NX2 Shocks
$1,109.21 MSRP

#1438FS - (2Door) 3" Lift System with FOX 2.0 Shocks
$1,551.33 MSRP

Related Kits/Products

#1435H - 2" Lift Kit for Jeep Wrangler JL (4Door)

Available Accessories

#124344 - Front Adjustable Upper Control Arms
#124466 - Rear Lower Control Arms
#124467 - Rear Adjustable Lower Control Arms

Features /  Benefits

- F/R ProRide coil springs offer improved ride quality and more articulation
- Sway bar quicker disconnects and extended rear link for improved offroad flex
- Front HD track bar to correction position the front axle and control lateral movement
- Rear track bar bracket repositions rear axle under vehicle
- Lower cam locks to correct caster for alignment
- Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
- Allows clearance for 37” tires

Install Time / Difficulty

5-6 Hours / 3 of 5

Important Notes

- Non-Rubicon comes from factory at lower ride height, will net slightly more lift final stance the same for all models
- Stock wheels cannot be reinstalled without spacers due to rear sway bar interference.

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

BDS Suspension has several new kits in the development for the 2018-2020 Jeep Wrangler and Wrangler Unlimited JL. The latest kit to hit the shelves ready for sale are new 3” lift systems, specially designed for improved on-road ride quality and handling while taking offroad capability to the next level with clearance for up to 37” tires. Designed to not only lift, but enhance the new Wrangler JL’s all around performance, these new 3" systems come complete and ready to perform right out of the box. At each corner replacement 2Dr or 4Dr JL-specific ProRide coil springs are supplied to mimic the factory ride and spring rate. These springs provide additional ride height, along with allowing for increased suspension travel. They are paired to your choice of specially tuned NX2-series gas or FOX 2.0 performance series IFP gas shocks to offer a smooth ride and better damping in rough terrain. Along with the new coil springs and gas shocks, these 3" kits include front and rear bump stop extensions to properly limit suspension up travel. A heavy duty, pinch-bolt style adjustable front track bar is utilized to recenter the front axle and eliminate any unwarrented side-to-side movement. Front caster correct is provided by a set of lower cam lock washers. JKS quicker disconnects are supplied with the kit to unlock the front suspension’s potential to flex while maintaining quiet on road operation with a heavy duty adjustable design and spherical bushings. Along with the sway bar disconnects bolt-on mounting posts are supplied for each side to easily store the sway bar up out of the way when hitting the trail. In the rear extended length sway bar links are supplied to keep the sway bar at the optimal operating angle and allow more droop travel when paired with matching rear NX2-series or FOX 2.0 performance series shocks. Finishing out the rear of this kit is a 2-piece rear track bar bracket to recenter the rear axle under your new Wrangler JL while improving the operating angle for improved roll center geometry.

As with all BDS Suspension products these are backed by Factory Protection Plus offering safety and security with a limited lifetime warranty and ESC system compatibility along with 5-year, 100,000-mile extended drivetrain warranty. Go with confidence and get more out of your new late model Jeep Wrangler JL with BDS Suspension.

Media Gallery

3" Lift Systems for 2018-2020 Jeep Wrangler JL
3" Lift Systems for 2018-2020 Jeep Wrangler JL
3" Lift Systems for 2018-2020 Jeep Wrangler JL
3" Lift Systems for 2018-2020 Jeep Wrangler JL

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR358-a

Upgrade your new Jeep Wrangler JL with these new replacement heavy duty adjustable rear lower control arms from BDS Suspension. These arms add strength and adjustability to your late model Jeep Wrangler JL built from thick wall tubing and specially formed for additional ground clearance. At the axle end they utilize a OE-style rubber bushing for long sertvice-free operation and better isolation of NVH. At the frame mount they feature a large forged flex end for strength, adjustability and offroad articulation. The flex ends allow length to be adjusted to optimal positioning at a range of lift heights and allow for up to 30-degrees of misalignment out on the trail. Ready to bolt-in right out of the box, these arms are finished in a durable textured black powdercoat. As with all BDS products, these arms are backed by the No Fine Print Warranty so you can use it abuse it. Upgrade your JL's rear lower control arms with BDS Suspension.

Product Description

Rear HD Adjustable Lower Control Arm Kit
for Jeep Wrangler JL

Vehicle Fitment

2018-2020 Jeep Wrangler JL 4 Door
2018-2020 Jeep Wrangler JL 2 Door

Kit Info

#124467 - Jeep JL Rear Adjustable LCA Kit - $325.51

Related Kits/Products

#124344 - Front Adjustable UCA Kit
#124466 - Rear Fixed LCA Kit

KEY FEATURES

- Heavy duty construction, formed to improve ground clearance.
- Fully welded ends with factory-style rubber bushing and large forged flex end
- Designed for 2-4.5" lifts to correct rear axle positioning.
- Finished in durable textured black powercoat.
- Fully assembled, ready to install

Install Time / Difficulty

1 Hour / 1 of 5

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com