Factory Protection Plus / 560plus.com
All BDS Suspension Systems
Support Files & Links
Coldwater, MI—November 22, 2013— Introducing Factory Protection Plus, the ultimate lifted suspension protection coverage and BDS Suspension now includes it with each and every lift kit. Factory Protection Plus brings together BDS Suspension’s exclusive No Fine Print Warranty plus FMVSS No.126 ESC System Compliance Testing plus a 5 Year / 60,000 Mile Supplemental Drivetrain Warranty. Vehicle may be eligible for parts or all of Factory Protection Plus depending on age of the vehicle and best part about it, it’s FREE!
Factory Protection Plus Features:
What is FMVSS No.126?
When you see the FMVSS Compliant Symbol you will know with confidence this application has been tested and successfully passed the Federal Motor Vehicle Safety Standard No. 126 compliance test. This highly specialized test was performed to prove the installation of the particular BDS Suspension system, with specified wheel and tire package will not compromise the performance and effectiveness of the vehicle’s Electronic Stability Control (ESC) system keeping you safer on the road.
the 560Plus.com 5 year / 60,000 mile Supplemental Drivetrain Warranty.
A 5 year – 60,000 mile drivetrain warranty is available for BDS Suspension equipped vehicles as a Supplemental Drivetrain Limited Warranty while your vehicle is covered by the new vehicle express drivetrain limited warranty supplied by Ford, General Motors, Chrysler or Toyota. The protection applies to any BDS eligible suspension systems purchased on or after November 1st, 2013.
How Factory Protection Plus Works
After installing a BDS Suspension system, the owner goes to 560Plus.com and fills out a Factory Protection Plus application form. Applicant will receive acknowledgment outlining the terms of their BDS warranty and the 560Plus.com Supplemental Drivetrain Limited Warranty. That’s it! The vehicle is covered.
About 560Plus, LLC
Factory Protection Plus is a program provided by 560Plus, LLC for participating suspension companies and owners with qualifying vehicles. Go to 560Plus.com for additional information and an online application form.
New Product Release
#712H 4″ Steel Arm
#713H 4″ Alum Arm
4″ High Clearance Lift Kit
2014 Chevy 1500 4WD
2014 GMC 1500 4WD
Support Files & Links
BDS 4″ High Clearance Lift Kits for 2014 Chevy/GMC 1500 Trucks
2014 GM 1/2-ton 4WD
Coldwater, MI—November 21, 2013— BDS Suspension continues to add to its product lineup for the 2014 Chevy/GMC 1500 trucks with with new 4″ High Clearance Lift Kits that allow for 35″ tires to be installed.
These kits have been independently tested for compliance with the National Highway Traffic Safety Administration’s (NHTSA) FMVSS No.126 and has been verified compliant with those standards to not effect the Electronic Stability Control (ESC) systems.
This new suspension system utilizes the tried and true high-clearance IFS suspension design that has made BDS the preferred suspension lift for late model GM trucks. This kit offers more ground clearance than any other kit on the market along with the strength to stand up to any abuse you can throw at it. At the heart of these new lift kits are the ductile iron replacement steering knuckles and high-clearance crossmembers. These components establish a suspension geometry that not only performs well on and off-road, but are compliant with the factory traction control systems.
The new suspension works seamlessly with the newly redesigned electric power steering system that is standard on the 2014 models. A 3-piece diff drop kit securely repositions the front differential to correct CV axle angle and allowing for the use of the stock front driveshaft. Front end drivetrain components are protected by the heavy duty 3-piece skid plate system that ties the front and rear crossmembers together for a rigid subframe. Also included in this kit are replacement tie rod ends, longer sway bar links, and brake line brackets, and new gas struts to improve ride quality.
A cast iron 4″ block is used in place of the stock 1.25″ block along with longer u-bolts, brake line bracket and your choice of BDS-5500 or Fox 2.0 gas shocks to lift the rear and level the stance.
New for 2014 GM truck is the availability of both steel and forged aluminum control arms from the factory. BDS offers kits built specifically to fit either the steel or aluminum arm equipped trucks. Check your vehicle before ordering to ensure the correct kit is shipped.
As with all BDS kits, these lift kits are backed by the Factory Protection Plus Program, a 5-year, 60,000 mile drivetrain warranty, FMVSS No.126 ESC System compliancy, and BDS’s exclusive No Fine Print Warranty.
For more info on this kit and to find your local distributor, head to BDS Suspension or call (517) 279-2135.