PR406-1

BDS Suspension adds to its lineup of suspension lifts and accessories for the late model 2019-2020 RAM 1500 and Rebel with new 4" lift systems for the air ride equipped models. Built around the tried and true high clearance technology used on all BDS RAM 1500 kits, these new systems have been engineered and tested to retain full functionality of the adjustable ride height air suspension, while correcting suspension, steering and driveline geometry. The result, a rugged, capable lift system that is comfortable on the road with clearance for 35" tires. As with all BDS lift kits these 4" IFS systems are backed by Factory Protection Plus bringing peace of mind with BDS's No Fine Print Warranty, FMVSS No.126 ESC system compliance, and a 5-year 100,000-mile drivetrain warranty at no additional cost. Improve the stance and capability of your RAM Rebel with BDS Suspension.

Product Description

4" Air Ride Lift Systems
for 2019-2020 RAM 1500 4WD

Vehicle Fitment

2019-2020 RAM 1500 Air Ride 4WD
*2021 models have not been approved

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Product Info

1697H/FS - 4" Air Ride Lift System (std bore knuckles)
1698H/FS
- 4" Air Ride Lift Systems (large bore knuckles)

Features/Benefits:

  • Kit retains full functionality of the air ride system and ride height modes
  • Retains ride quality and handling characteristics
  • Utilizes high clearance crossmembers and differential skid for strength and protection
  • 3piece differential relocation secures front differential while improving CV axle angle
  • CNC machined ductile iron steering knuckles for FMVSS No.126 (ESC System) compliance
  • Allows clearance for 35" tires

Available Accessories:

BDS122402 – 19-21 RAM 1500 Carrier Bearing Drop

Important Notes

  • Extreme care/caution must be taken to follow the steps of these instructions to prevent any air leaks or damage to the bags during installation.
  • The factory air ride is a closed loop system. Opening the system more times than recommended in the lift instructions will require the system to be recharged (this can be done at any RAM dealer service department). A scan tool is needed to access the air control module to perform the service.
  • Frame bracket modification is required.
  • Fits 4WD models equipped with factory air ride only.
  • Stock 17-18" wheels cannot be reinstalled, stock 20"+ wheels can be reinstalled with factory size tires.
  • Trucks equipped with factory 22" wheels must use the large bore steering knuckles.

Rec'd Wheel/Tire Specs

35x12.50 Tires with 17x9 Wheels and 4.5" BS
35x12.50 Tires with 18x9 Wheels and 5" BS
35x12.50 Tires with 20x9 Wheels and 5" BS
35x12.50 Tires with 22x9 Wheels and 5" BS

Coldwater, MI : BDS Suspension is now offering updated 4" lift systems for the late model 2019-2020 RAM 1500 and Rebel trucks equipped with Air Ride. These new air ride compatible kits are built to the highest standard to maximize the truck’s potential with room for 35" tires. Built on BDS’s tried and true high clearance design these kits correct steering, suspension and driveline geometry for on road comfort, handling and safety. These systems have been engineered and tested to retain full functionality of the factory air ride system allowing you to adjust ride height through the various modes. Up front this 4" system includes a pair of high clearance laser cut crossmembers along with a 3-point differential relocation system and differential skid plate to create a stout subframe for the suspension components to be installed. New ductile iron CNC machined steering knuckles are supplied along with heavy duty tie rod ends to keep allow for ESC system compatibility. Top mounted strut spacers are supplied to allow the use of the air ride front air bag struts along with all the necessary air-line fittings. A billet aluminum driveshaft spacers is supplied to lengthen the factory front driveline along with brake line brackets, sway bar link extensions and all the necessary hardware to complete the install.

The rear of the air-ride equipped RAM 1500 mimics the standard RAM 1500 with the exception of adjustable height rear air bags. The additional ride height comes from a pair of 3" top mounted air bag spacers to lift and level the stance. New air lines and fittings are supplied to along with ride height sensor brackets to maintain proper positioning and functionality of the factory air ride system at the new height. BDS supplies rear upper control arm relocation brackets to correct the geometry at the taller ride height. A track bar correction bracket is supplied to recenter the rear axle along with new extended length sway bar links to improve stability on and off-road. Rounding out the rear of these air ride kits are brake line relocation brackets, bump stop extensions and your choice of either BDS NX2 gas or upgrade FOX 2.0 performance series gas shocks. This new 4" lift kit corrects the suspension geometry and allow for full use of the ride height adjustability in the various modes to with the base lift set at 4" over. Get more out of your air ride equipped RAM 1500 or Rebel with BDS!

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR402-1

BDS Suspension is now shipping leveling kits, lift kits, and accessories for the 2021 Ford F250/F350 Super Duty trucks. These kits are a carry over from 2020 fitments now tested and approved for use on the 2021 models. Current kits include 2.5", 4", and 6" lift heights with more options on the way, BDS offers a variety of lift options to improve the look, performance, and capability of your late model Super Duty. Along with these lift options, BDS also offers several accessory options including shocks and stabilizers, coilover conversions, radius arms, driveline adjustment, track bars and traction bars. As with all BDS kits, these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, ESC System compliance and a 5year - 60,000mile supplemental drivetrain warranty.

Product Description

BDS Lift Kits and Accessories for 2021 Ford Super Duty

Product Info

2020-2021 F250/F350 SRW Gas
BDS1550H/FS – 4” Radius Arm Systems w/ rear block
BDS1560H/FS – 4” Radius Arm Systems w/ rear spring
BDS1568H/FS – 4” 4-Link Systems w/ rear block
BDS1570H/FS – 4” 4-Link Systems w/ rear spring

2020-2021 F350 DRW Gas
BDS1564H/FS – 4” Radius Arm Systems w/ rear block
BDS1566H/FS – 4” 4-Link Systems w/ rear block

2020-2021 F250/F350 SRW Diesel
BDS1549H/FS – 2.5” Radius Arm Systems w/ rear block
BDS1549F – 2.5” Radius Arm Coilover Systems w/ rear block
BDS1551H/FS – 4” Radius Arm Systems w/ rear block
BDS1551F – 4” Radius Arm Coilover Systems w/ rear block
BDS1557H/FS – 4” Radius Arm Systems w/ rear spring
BDS1557F/FDSC – 4” Radius Arm Coilover Systems w/ rear spring
BDS1567H/FS – 4” 4-Link Systems w/ rear block
BDS1567F/FDSC – 4” 4-Link Coilover Systems w/ rear block
BDS1569H/FS – 4” 4-Link Systems w/ rear spring
BDS1569F/FDSC – 4” 4-Link Coilovers System w/ rear spring
BDS1561H/FS - 6" Radius Arm System w/ rear block
BDS1561F/FDSC - 6" Radius Arm C/O System w/ rear block
BDS1562H/FS - 6" Radius Arm System w/ rear spring
BDS1562F/FDSC - 6" Radius Arm C/O System w/ full spring

2020-2021 F350 DRW Diesel
BDS1549H/FS – 2.5” Radius Arm Systems w/ rear block
BDS1549F – 2.5” Radius Arm Coilover Systems w/ rear block
BDS1563H/FS – 4” Radius Arm Systems w/ rear block
BDS1563F/FDSC – 4” Radius Arm Coilover Systems w/ rear block
BDS1565H/FS – 4” 4-Link Systems w/ rear block
BDS1565F/FDSC – 4” 4-Link Systems w/ rear block
BDS1573H/FS - 6" Radius Arm System w/ rear block
BDS1573F/FDSC - 6" Radius Arm C/O System w/ rear block
1573H/FS – 6” Radius Arm Lift Kit w/ Rear Block
1573F/FDSC – 6” Radius Arm Coilover Lift Kit w/ Rear Block

*additional kits coming soon

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Vehicle Fitment

2020-2021 Ford F250 Super Duty 4WD
2020-2021 Ford F350 Super Duty 4WD - SRW
2020-2021 Ford F350 Super Duty 4WD - DRW

Available Accessories

BDS85431 - Single NX2 Steering Stabilizer
BDS55380+BDS85429(x2) - Dual NX2 Steering Stabilizer Kit
BDS55380+FOX98224010(x2) - Dual FOX Steering Stabilizer Kit
BDS123203 - Adjustable Track Bar Kit
BDS123402 - Carrier Bearing Drop Kit
BDS123251 – HD Radius Arm Kit
BDS123605 – T-Case Indexing Ring Kit
BDS123005 - Rear Sway Bar Link Kit
BDS123809 - Rear Driveshaft Spacer Kit
BDS123416+BDS123409 - Recoil Traction Bars (3.5-4” Axle Dia)
BDS123426+BDS123409 - Recoil Traction Bars (4.5” Axle Dia)
BDS123613 – Front Coilover Mounting Bracket Kit
123808 – Rear Sway Bar Links (6-8” Lifts)
FOX 2.5 R/R Coilovers
NX2 and FOX 2.0 PS Shocks

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

PR402-2

BDS Suspension is now shipping lift options for the 2021 Ford Super Duty trucks allowing you to improve the capability and performance with with room for larger tires. Available kits include:

2.5" Radius Arm and Coilover Kits: build for performance and ride quality without going sky-high, these 2.5" radius arm options lift and level the stance with clearance for 35" tires. A pair of tubular radius arms offer improved strength and caster adjustment over the factory thin stamped steel arms. Standard kits use ProRide coil springs and your choice of NX2-series or FOX 2.0-series gas shocks while the performance option is to convert over to FOX 2.5 factory series coilovers with remote reservoir paired with FOX 2.0 shocks at each corner. To correct the front axle lateral positioning a heavy duty adjustable track bar bolts in place of the factory track bar frame mount. In the rear these kits use a 1" bolt-in lift block and longer u-bolts.

4" Radius Arm, 4-Link and Coilover Kits: A popular option for the late model Super Duty, these 4" lift systems allow fitment for 35-37" tires while improving the appearance and capability. The 4" kits are offered in several configurations to include both front heavy duty radius arms as well as a 4-link conversion for improved strength, handling and caster control. Standard kits use 4" ProRide coil springs and your choice of NX2-series or FOX 2.0-series gas shocks while the performance option is to convert over to FOX 2.5 factory series coilovers with remote reservoir paired with FOX 2.0 shocks at each corner. Steering angles are corrected with a forged drop pitman arm with an integrated drag link flip. This is used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets, an OE replacement single NX2 steering stabilizer, replacement rear lift blocks or leaf springs and longer u-bolts to complete the install.

6" Radius Arm, 4-Link and Coilover Kits: Stepping up to the 6" systems, BDS offers systems allow fitment for 37-38" tires while improving the appearance and capability. The 6" kits are offered in several configurations to include both front heavy duty radius arms as well as a 4-link conversion (available soon) for improved strength, handling and caster control. Standard kits use 6" ProRide coil springs and your choice of NX2-series or FOX 2.0-series gas shocks while the performance option is to convert over to FOX 2.5 factory series coilovers with remote reservoir paired with FOX 2.0 shocks at each corner. Steering angles are corrected with a forged drop pitman arm with an integrated drag link flip. This is used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets, an OE replacement single NX2 steering stabilizer, replacement rear lift blocks or leaf springs and longer u-bolts to complete the install. To correct front driveline angles, BDS supplies a high strength transfer case indexing ring to rotate the front output of the transfer case lower. The indexing ring uses ARP studs and includes new mounting hardware. Also supplied is a heavy duty replacement transmission crossmember to allow additional clearance.

Available Accessories: BDS offers a number of kit accessories for the new 2021 Ford Super Duty designed to further enhance the truck's performance. While the standard steering stabilizer is sufficient at controlling from end shimmy caused by oversized tires, BDS also offers a dual steering stabilizer kit that offers better control, steering firmness. Available with your choice of NX2 cylinders or FOX 2.0 50/50 valved gas cylinders these dual steering stabilizer kits help keep you in control with aggressive, oversized tires over rough terrain.

Recoil traction bars improve performance on the street without binding up the rear suspension like most traction bar kits on the market. This revolutionary full float design uses an internal 3000 lb/in compression spring that can be preloaded while installed on the vehicle to offer a range of settings. These kits use vehicle specific mounting brackets designed specifically for the late model F250/F350 with 3.5-4" diameter rear axles.

Take your new 2021 Ford Super Duty to the next level with BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR396-01

BDS Suspension adds next level performance to its F150 lineup with 2" coilover systems for the 2009-2013 and 2014-2020 Ford F150 trucks. These join BDS's existing leveling, 4" and 6" lift options. These new 2” performance leveling systems improve all around vehicle performance and capability with FOX 2.5 factory series remote reservoir coilovers (w/ optional DSC adjustment), BDS performance series upper control arms and your choice of FOX 2.0 performance series or FOX 2.5 factory series piggyback reservoir rear shocks allowing clearance for up to 35" tires. Kits will NOT fit 2021 model Ford F150s, those kits are in development to be released soon.

Product Description

2" Coilover Systems for Ford F150

Vehicle Fitment

2009-2020 Ford F150

Rec'd Wheel/Tire Specs:

35x12.50 Tires on 20x9 Wheels (5.5" BS)

Install Time/Difficulty:

3 Hours / 3 of 5

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Product Information:

2009-2013 F150
#BDS1554FSL - 2" Coilover System (2.0 IFP Front / 2.0 IFP Rear)
#BDS1586F - 2" Coilover System (2.0 IFP Front / 2.0 IFP Rear)
#BDS1586FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.0 IFP rear shocks)
#BDS1554F -2" Coilover System (2.5 R/R Front / 2.5 P/B Rear)
#BDS1554FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.5 P/B Rear)

2014-2020 F150
#BDS1553FSL - 2" Coilover System (2.0 IFP Front / 2.0 IFP Rear)
#BDS1582F - 2" (Coilover System (2.5 R/R Front / 2.0 IFP Rear)
#BDS1582FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.0 IFP Rear)
#BDS1553F - 2" Coilover System (2.5 R/R Front / 2.5 P/B Rear)
#BDS1553FDSC - 2" DSC Coilover System (2.5 R/R Front / 2.5 P/B Rear)

Features/Benefits:

  • FOX 2.0 IFP or 2.5 R/R coilovers for next level shock damping
  • Performance UCAs add strength and increase suspension travel
  • Levels stance with clearance for up to 35" tires
  • Rear FOX 2.0 IFP or 2.5 P/B shocks for improved performance
  • Improved ride quality, control, and capability

Coldwater, MI: BDS Suspension introduces the latest addition to its ever-expanding product lineup for the later model 2014-2020 Ford F150 with new 2" coilover conversion systems in stock and now shipping. Designed to be so much more than just a "leveling kit", these new coilover systems take advantage of the factory suspension geometry without overextending operating angles and offer next level performance in a smaller lift package. At the heart of these new 2" systems are a pair of precision tuned FOX 2.5 factory series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs above. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are your choice of FOX 2.0 IFP or FOX 2.5 factory series piggyback rear gas shocks to match the front and complete the package.

As with all BDS kits, these come ready to install right out the box with all hardware packs and step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your F150 with this new 2" coilover system from BDS Suspension and FOX.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR401-01

BDS Suspension is now shipping complete 6" radius arm systems for the 2019+ RAM 2500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms, front and rear progressive rate coil springs, your choice of gas shocks, steering correction and more allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 6" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

5.5 - 6" Radius Arm System for 2019-2020 RAM 2500 Trucks

Vehicle Fitment

2019-2020 RAM 2500 4WD

Rec'd Wheel/Tire Specs:

37x12.50 Tires w/ 20x9 Wheels and 4.5"-6.25" BS
37x13.50 Tires w/ 20x9 Wheels and 5.625" BS
37x12.50 Tires w/ 18x9 Wheels and 4.5"-5.625" BS
37x13.50 Tires w/ 18x9 Wheels and 5.625" BS

Product Information:

BDS1680H/FS – 6” Radius Arm Kit  (Diesel | 6-Bolt Tcase)
BDS1681H/FS - 5.5" Radius Arm System (Gas | 6-Bolt Tcase)

Important Notes:

  • 6.4L gas models will require exhaust modification to clear front driveshaft. Vehicle can be driven w/o front driveshaft for an exhaust shop to make necessary modifications
  • Will not fit rear air-ride equipped models
  • Will not fit Power Wagon models

Available Accessories:

BDS122324 -HD Adjustable Track Bar
BDS85427 - Single NX2 Steering Stabilizer
FOX98224018 - Single FOX 2.0 Steering Stabilizer
BDS55382/BDS85422 - Dual NX2 Steering Stabilizer Kit
BDS55382/FOX98224016 - Dual FOX Steering Stabilizer Kit
BDS122609 - HD Rear Track Bar
BDS102003 - SS Front Brake Lines Pr.
BDS122406 - Carrier Bearing Drop Kit
BDS082405 - Drop Pitman Arm

Features/Benefits:

  • Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
  • F/R high strength progressive rate coil springs for a great ride on any terrain
  • F/R track bar relocation bracket to re-position axles under the truck
  • Forged drop pitman arm to correct steering angles
  • F/R Sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for 37" tires
Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

Coldwater, MI: BDS Suspension is now shipping complete 5.5-6" radius arm systems for the 2019+ RAM 2500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms, front and rear progressive rate coil springs, your choice of gas shocks, steering correction and more allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 5.5-6" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

6" Radius Arm Systems (Diesel)

Up front these systems use a pair of (gas specific) progressive rate 6" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 6" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement adjustable transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear of the RAM 2500 kits 4.5" progressive rate coil springs are supplied to provide a level stance while maintaing load capacity and ride quality and all around performance. Extended rear sway bar end links and new bump stops are included to compensate for the lift along with a track bar bracket to re-center the rear axle. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks.

5.5" Radius Arm Systems (Gas)

Up front these systems use a pair of (gas specific) progressive rate 5.5" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 5.5" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement adjustable transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear of the RAM 2500 kits 4.5" progressive rate coil springs are supplied to provide a level to slightly tail high stance while maintaing load capacity and ride quality and all around performance. Extended rear sway bar end links and new bump stops are included to compensate for the lift along with a track bar bracket to re-center the rear axle. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks.

As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new radius arm systems from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR399-01

BDS Suspension is excited to announce first to market 4" and 6" lift systems for the 2021 Ford F150. These high clearance IFS systems are based around the tried and true design that BDS has been offering for the 2009+ F150 with specifically catered to the redesigned 2021 Ford F150 platform. Available in standard (strut spacer) IFS systems as well as FOX 2.5 factory series coilover systems, BDS offers next level performance and capability with clearance for up to 37" tires under the new F150. As with all BDS lift kits these new 4" and 6" lift system includes Factory Protection Plus for the ultimate extended warranty. Factory Protection Plus brings together BDS’s legendary No Fine Print Warranty, ESC system compliance and a 5year-60,000mile drivetrain warranty to match your Ford dealers offerings. Take your new F150 to the next level with BDS Suspension and FOX.

Product Description

BDS Lift Systems
2021 Ford F150

Product Information:

2" Kits:
Coming Soon...

4" Lift Systems:
#BDS1583H - 2021 Ford F150 4" Lift System - NX2 Shocks
#BDS1583FS - 2021 Ford F150 4" Lift System - Fox Shocks
#BDS1583F - 2021 Ford F150 4" Lift System, Fox Coilover - Fox Shocks
#BDS1583FDSC - 2021 Ford F150 4" Lift System, Fox DSC Coilover - Fox Shocks

6" Lift Systems:
#BDS1579H - 2021 Ford F150 6" Lift System - NX2 Shocks
#BDS1579FS - 2021 Ford F150 6" Lift System - Fox Shocks
#BDS1579F - 2021 Ford F150 6" Lift System, Fox Coilover - Fox Shocks
#BDS1579FDSC - 2021 Ford F150 6" Lift System, Fox DSC Coilover - Fox Shocks

Vehicle Fitment

2021 Ford F150 4WD

Rec'd Wheel/Tire Specs:

4" Lift Systems:
35x12.50 tires with 20x9 wheels and 5.5" BS
35x12.50 tires with 18x9 wheels and 5" BS

6" Lift Systems:
37x12.50 tires with 20x9 wheels and 5.5" BS
35x12.50 tires with 18x9 wheels and 5" BS

Install Time/Difficulty:

8-10 Hours / 4 of 5

Available Accessories:

Coming Soon...

Kit Pricing:

View Website

-Features/Benefits:

  • High clearance crossmembers design maximizes ground clearance while offering additional offroad protection
  • Redesigned steering knuckles specific to the 2021 F150 to maintain ESC system compliance
  • Available with strut spacers or FOX 2.5 factory series R/R coilovers to improve ride quality, performance and offroad capability
  • Multipoint differential relocation brackets to secure front axle and improve CV angles
  • Rear lift is provided via a replacement lift block to level stance, to eliminate need to stack blocks
  • Kits includes Factory Protection Plus (No Fine Print Warranty, ESC System compatibility, 5yr-60k mile drivetrain warranty)
  • Kit allows clearance for 35-37" tires
Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Coldwater, MI: While Ford is gearing up to begin shipping 2021 Ford F150, the team at BDS Suspension took advantage of their early access to the all new F150 (through Ford's Auto Night Event) to swiftly work through the development, testing, manufacturing and ultimately release of new lift kit options. With that BDS Suspension is excited to announce first to market 4" and 6" lift kits for the 2021 Ford F150 designed to improve on-road handling and offroad capability. Available as standard (strut spacer) IFS systems or FOX 2.5 factory series coilover systems, BDS takes the new Ford F150 to the next level with clearance for 35-37" tires. These systems are based around the tried and true high clearance technology that has made BDS the go to for F150 trucks and are designed from the ground up to get the more out of your truck with the most ground clearance on the market.

At the heart of these new lift systems a pair of specially designed 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of newly designed ductile iron replacement steering knuckles are supplied to accomodate the new OE sway bar mounting location while maintaining proper steering geometry for ESC system compatibility. The front differential is repositioned via multipoint relocation brackets to keep CV angles in check. A billet aluminum front driveshaft spacer is supplied along with longer hardware to allow the reinstallation of the factory driveshafts. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of these lift systems, the factory block is replaced with either a 3" or 5" lift block and longer u-bolts to lift and level the stance depending on front lift height. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Specially tuned NX2 twin-tube gas or FOX 2.0 IFP performance series monotube gas shocks are supplied to round out the rear of these kits. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compliance and a 5year-60,000mile drivetrain warranty to match the dealer. Improve the look and capability of your 2021 Ford F150 with these first to market 4" or 6" lift systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension is now shipping leveling kits, lift kits, and accessories for the 2021 Chevy/GMC 1500 Trucks.  Currently available in 3.5", 4", and 6" lift heights, BDS offers a variety of lift options to improve the look, performance, and capability of your late model GM truck with clearance for up to 37". Along with these lift options, BDS also offers several accessory options including: upper control arms, Recoil traction bars, and FOX shock/coilover options.  As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty.

Product Description

BDS 2.5", 4" 6" Lift Systems and Accessories for 2019-2021 Chevy/GMC 1500 Trucks

Vehicle Fitment

2019-2021 Chevy Silverado 1500 4WD
2019-2021 Chevy Silverado 1500 Trail Boss 4WD
2019-2021 GMC Sierra 1500 4WD
2019-2021 GMC Sierra 1500 AT4 4WD
2019-2021 GMC Denali 1500 4WD (w/ ARC)

Available Accessories:

121253 - Upper Control Arm (UCA) Kit
121409/123409 - Recoil Traction Bars

Silverado/Sierra 1500 Kits:

772FDSC/755FDSC - 3.5" DSC Coilover UCA Kits
748H/FS – 4” IFS Lift Kit (strut spacer)
748FSR – 4” (2.0 Snap Ring) Coilover Lift Kit
748F/FDSC 4” (2.5 Factory Race R/R) Coilover Lift Kit
746H/FS – 6” IFS Lift Kit (strut spacer)
746FSR – 6” (2.0 Snap Ring) Coilover Lift Kit
746F/FDSC 6” (2.5 Factory Race R/R) Coilover Lift Kit

Trail Boss/AT4 1500 Kits:

772FDSC/755FDSC - 1.5" DSC Coilover UCA Kits
754F/FDSC 2.5” (2.5 Factory Race R/R) Coilover Lift Kit
749H/FS – 4” IFS Lift Kit (strut spacer)
749F/FDSC 4” (2.5 Factory Race R/R) Coilover Lift Kit

*TB/AT4 trucks come 2" taller that standard 1500 models. Lift heights displayed are net lift amount (4" TB Kit is equivalent ride height of standard 1500 6" Kit)

Denali 1500 Kits:

750H/FS - 4" IFS Lift Kit (strut spacer)
747H/FS - 6" IFS Lift Kit (strut spacer)

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • FMVSS No.126 ESC System compliance
  • BDS’s exclusive No Fine Print Warranty
FMVV No.126 Compliant

3.5" Coilover Lift Systems: Ready for new level performance?! These 3.5" systems (nets 1.5" on TB/AT4) up your trucks ride quality, performance and capability by converting over to FOX 2.5 DSC coilovers. Also included for the front are high strength BDS upper control arms (UCA). These offer improved wheel travel, improved damper control and easy adjustability. In the rear a replacement block & u-bolt kit is used to level the stance and get the choice of FOX 2.0 IFP shocks or upgraded FOX 2.5 remote DSC to match the front. This kit allows clearance for 33-35" tires.

4"/6" Standard Lift Systems: These 4"/6" kits come complete with everything you need to properly lift your truck and allow clearance for up to 37" tires. Parts list includes high strength crossmembers, steering knuckles, tie rod ends, diff drop brackets, front and differential skid plates, top mounted strut spacers, sway bar relocation, brake line relocation, rear block kit and your choice of gas shocks.These systems are not only built for daily driving, but will handle most any offroad excursion you can think of and provide extra ground clearance and heavy duty skid plates. *Denali models include sensor brackets and rear shock relocation brackets to retain the ARC (adaptive ride control) system. **TB/AT4 models net 4" lift although ride height similar to 6" standard kit.

4"/6" Snap-Ring (2.0) Coilover Systems: Stepping up from the standard lift systems, these 4"/6" snap-ring coilover systems upgrade the standard top mounted strut spacers to FOX 2.0 performance series IFP snap-ring coilovers designed to be used with the factory coil spring and top plate for improved damper performance. In the rear FOX 2.0 performance series IFP shocks come standard to mathc the front performance. Other components include high strength crossmembers, steering knuckles, tie rod ends, diff drop brackets, skid plates, sway bar relocation, brake line relocation, and rear block kit. This system allow clearance for up to 37s.

4"/6" Remote Reservoir (2.5) Coilover Systems: If you're looking for the best, these are the systems for you. Building on the tried and true BDS high clearance design these kits maintain on-road handling and performance while upping the ante with FOX 2.5 factory series remote reservoir coilovers for truely next level performance on any terrain. These coilovers are available in standard or DSC adjustable versions and pair with a set of FOX 2.0 IFP performance series rear shocks. Other components include high strength crossmembers, steering knuckles, tie rod ends, diff drop brackets, skid plates, sway bar relocation, brake line relocation, and rear block kit for clearance of up to 37" tires. **TB/AT4 models net 2.5" or 4" lift although ride height similar to 4" or 6" standard kits.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com