BDS Suspension is now shipping leveling kits, lift kits, and accessories for the 2020 Toyota Tundra.  Currently available in 3", 4.5", and 7" lift heights, these lift options improve the look, performance, and capability of your late model Toyota Tundra with clearance for up to 37". Along with these lift options, BDS also offers several accessory options including: Upper Control Arms, Recoil Traction Bars, Carrier Bearing Drop Kit, 1" Rear Shackle Kit, Rear Sway Bar Links, Rear Shocks, and Coilover Mouinting.  As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 60,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2020 Toyota Tundra with BDS Suspension.

Vehicle Fitment

2019-2020 Toyota Tundra

Product Description

BDS 3", 4.5", 4.5" c/o, 7", 7" c/o Lift Systems
for 2019-2020 Toyota Tundra

Available Accesories

#128408+123409 – Recoil Traction Bars
#128409 – Carrier Bearing Drop Kit
#128109 – 1” Rear Shackle Kit
#128308/128509 – Rear Sway Bar Links
#85952 – Rear Shocks
#128451/128700 – C/O mounting

#88002947/88006947 – 2.5 R/R (3” BDS)
#88302124/88306124 – 2.5 R/R (4.5” BDS)
#88302057/88306057 – 2.5 R/R (7” BDS)

Product Info

#810H – 3” Leveling Kit
#824FSL/824F/824FDSC - 3" Coilover UCA
#819H/819FS  – 4.5" Lift Kit
#819F/819FDSC – 4.5" Coilover Lift Kit
#818H/818FS  – 7” IFS Lift Kit
#818F/818FDSC – 7" Coilover Kit

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain warranty
  • FMVSS No.126 ESC System compliance
  • BDS’s exclusive No Fine Print Warranty
FMVV No.126 Compliant

3" Leveling Kit: This kit is designed to level your vehicle. However, if you desire to maintain the stock rake there is a 1" shackle or 2" rear block kit available when you build your kit. Other options include rear shock absorbers for this 3" Toyota Tundra leveling kit

3" Coilover Lift System: These kits use FOX 2.0 performance series IFP coilovers for bolt-in upgrade to the factory strut assemblies for improve damper performance across all terrains. Also supplied as part of these complete 3" lift system are a pair of BDS performance series upper control arms (UCA). These UCAs improve suspension travel and while providing superior strength and styling to the factory arms. These arms are built from 1.5" OD heavy wall tubing, fully welded with integrated support gussets. They include brake line mounting tabs and use an indexed ball joint cup to correct ball joint positioning back to the neutral position at ride height. The BDS arms come fully assembled with OE-style rubber bushings for the frame mounts and a high-quality MOOG ball joint for smooth, quiet operation and better durability than arms that use heims and uniballs. 1" front differential spacers and longer hardware is supplied to reposition the front differential to keep CV axle angles at a minimum. In the rear, BDS supplies a set of heavy duty shackles. These shackles provide 1" of lift to level the stance and include grade 8 installation hardware. Rounding out the rear of this 3" coilover system are a pair of specially tuned FOX 2.0 performance series IFP shocks designed to pair with the front coilovers for impressive performance on and offroad. and allow clearance for 33" tires under Tundra.

4.5" Lift Kit: This complete 4.5" IFS w/ strut mount lift kit system incorperates the same features, technology, and performance-based design as our popular 07-15 system. This system is not only built for daily driving, but will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.

Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install that is made easier by the lower strut mounts that don't require you to disassemble the strut. Rear NX² series shock absorbers are included with 9500 series gas shocks available as an upgrade for this 4.5" Toyota Tundra lift kit

4.5" Coilover Lift System: BDS Suspension offers a sterling lineup of high quality suspension lift kits for the Toyota Tundra, including 4.5" performance coilover systems designed for vastly improved offroad performance while providing a smooth, comfortable ride on pavement. BDS Performance Coilover Systems build on the proven high clearance design of the 4.5" and 7" BDS suspension systems, offered with FOX 2.5 remote coilovers pre-tuned for optimal performance right out of the box, and the option to upgrade to DSC (dual speed compression - more info below) equipped coilovers. These 4.5" systems integrate flawlessly with the new electronic stability control (ESC) systems and allow enough clearance for 35" tires to be installed.

The complete system includes everything needed to turn your stock Tundra into a trail monster. Up front a pair of high strength, one-piece crossmember built from 1/4" steel are supplied along with the heavy duty full width belly skid plate to create an extremely rigid subframe to position the suspension and drivetrain components. A pair of CNC-machined ductile iron steering knuckles dwarf the factory units and reposition the steering mount to compensate for the lift. The FOX 2.5 remote reservoir coilovers come pre-tuned with Eibach coils to provide a great ride and provide 4.5" of lift right out of the box. Also included are frame mounted brackets for the remote reservoir, bump stop extensions, differential relocation brackets, weld-in frame reinforcement plates, longer swaybar links, alignment cam bolts, and heavy duty tie rod ends to round out the front of this kit. In the rear, 3" rear lift blocks and longer u-bolts are used to achieve a level to slightly tail high stance. Brake line extensions and precision tuned FOX 2.0 IFP rear shocks round out the system and giving clearance for 35" tires to be installed.

7" Lift Kit: This complete 7" IFS w/ strut mount lift kit system incorporates the same features and performance benefits of our 07-15 Tundra system. Designed for more than just daily driving, this system will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.

Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install. The lift is achieved with lower strut mounts and a stuft preload spacer. Rear NX² series shock absorbers are included with Fox 2.0 series gas shocks available as an upgrade for this 7" Toyota Tundra lift kit.

7" Coilover Lift System: This system utilizes BDS proven design standards including one-piece front & rear crossmembers coupled with precision machined ductile cast iron steering knuckles. The steering knuckles are designed to work within the factory traction control constraints and provide stock-like handling characteristics. The knuckles are also considerably more robust in both the mass and strength categories over the rather light-duty stock components.

The BDS High Clearance crossmembers are built from 1/4" laser cut steel and maximize ground clearance and strength. The relocated differential is protected by a skid plate tying the crossmemember together. The system also includes new sway bar links to correct the sway bar geometry.

The rear of the kit comes all the components necessary to level the truck and center the axle in the wheel well. This includes a 4" block, u-bolts and brake line relocation brackets. BDS by Fox 2.0 series rear shocks come standard in this system.

Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to the correct ride height for an easy installation, but can also be fined tuned to your liking.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension is now shipping lift kits for the 2020 Ford Ranger.  Currently available in 2", 2.5" 3.5", 6" lift heights, these lift options improve the look, performance, and capability of your Ford Ranger with clearance for up to 35" tires. Along with these lift options, BDS also offers several accessory options including: intrusion beams, rear shackle kits, and UCA kits.  As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 60,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2020 Ford Ranger with BDS Suspension.

Vehicle Fitment

2019-2020 Ford Ranger

Product Description

BDS 2" / 2.5" / 3.5" / 3.5" c/o / 6" Lift Systems
for 2019-2020 Ford Ranger

Available Accesories

#123252 - Upper Control Arm (UCA) Kit

Product Info

#1544H – 2” Leveling Kit
#1546H - 2.5" Lift Kit
#1545H – 3.5" Lift Kit
#1545FSL – 3" Coilover Lift Kit
#1547H – 6” IFS Lift Kit

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain warranty
  • FMVSS No.126 ESC System compliance
  • BDS’s exclusive No Fine Print Warranty
FMVV No.126 Compliant

2" Leveling Kit: Specially designed for the new Ranger, this 2" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop (as is the case with other top mounted spacers and taller leveling kits on the market). The issue with most other kits is they increase the overall length of the strut assembly maxing out ball joints and causing the CV shaft/boot to operate at an extreme angle leading to premature wear/failure of the components. To get around this apparent issue the BDS kit uses a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. The top mounted spacer installs easily and is finished in a durable black e-coating for a clean appearance. The preload spacer installs below the spring and raises the ride height without extending the overall extended length of the strut assembly while maintaining factory ride quality allowing you to get the most out of your new Ranger's factory suspension.

2.5" Lift System : This new system builds off the factory suspension mounting points and offers improved strength, ground clearance and suspension travel. All components have been engineered in unison to ensure suspension and drivetrain geometry is maintained, rather than other " leveling kits" on the market that just throw in a top spacer which maxes out the angles at droop. The new ride height is the result of a combination of a specially designed top mounted steel fabricated strut spacer in conjunction with a preload spacer for a total 2.5" of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axle boots and other front end components. To further ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. In the rear the factory shocks are replaced with your choice of precision tuned NX2 gas or FOX 2.0 performance IFP gas shocks for improved damping.

3.5" Lift System : This new system builds off the factory mounting points and offers improved strength, ground clearance and suspension travel. The new ride height is the result of a combination top mounted steel fabricated strut spacer along with preload spacer for a total 3.5" of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axles and other front end components. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable Moog ball joints and Clevite rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems is a small differential relocation to help further improve CV axle operating angle.

In the rear of these lift systems the factory leaf springs are retained and 1" lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5" lift kits are your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks for improved damper performance. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 3.5" UCA lift systems from BDS Suspension.

3.5" Coilover System : At the heart of these 3.5" coilover systems are a pair of specially tuned FOX 2.0 performance series coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation.This kit takes perfomrance for the next level by upgrading to FOX 2.0 performance series. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems are fully fabricated differential relocation brackets to correct CV axle operating angles.

In the rear of these lift systems the factory leaf springs are retained and 1" lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5" lift kits are a pair of FOX 2.0 IFP performance series gas shocks to match the front perfomrance. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

6" Systems: These kits have been built from the ground up to improve performance and functionality. This new 6" lift system joins the current 2.5" and 3.5" BDS lift options bringing you on road comfort, off-road capability and clearance for up to 35" tires. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality. Case in point the (NHTSA) National Highway Traffic Safety Administration's FMVSS No.126 compliance standards requiring any aftermarket modification to not adversely effect the vehicle's electronic stability control (ESC) system performance in the event of an evasive maneuver. These new kits have been independently tested and certified compliant with these standards with up to 35" tires [as tested on 35x12.50 tires on 18x9 wheels w/ 5" BS]. Additionally through our extensive testing we've found a number of concerns that needed to be addressed to ensure durability, compatibility and functionality on the new Ranger.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

Alberta Boys Custom did a fantastic job with this 2018 GMC Denali Dually with a Frost White Pearl coating, which has been nicknamed The Boar. This video gives you a great look of this beast out in the snow. With the Alberta Boys Custom team based out of Canada, there is plenty of snow to play in. For this truck its all about the details. There are custom-painted badges that match the frost white pearl exterior with hand-painted black edges for a subtle, but bold look.  This rig was built up for an adventure and ready for anything that comes its way. Tell us your thoughts in the comments below.

Build Specs: 2018 GMC Denali Dually

BDS 4.5" Lift System
35x12.50 Toyo M/T Tires
22" Fuel custom finish wheels

The Alberta Boys Custom team goes all out for their reveal videos, so be sure to check out the one above as well as keep up on all their builds by following them on Facebook, Instagram, and YouTube.

PR384-1

BDS Suspension is now shipping lift kits for the 2020 RAM 1500 4WD trucks. Currently available in 2", 4" and 6" lift heights, these lift options improve the look, performance, and capability of your late model RAM 1500 with clearance for up to 37". While there are several similarities between the 2019 and 2020 models, ultimately due to a few minor changes on the trucks the kits have been updated for fitment specifically on the 2020 model trucks. As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2020 RAM with BDS Suspension.

Product Description

BDS 2" / 4" / 6" Lift Systems
for 2020 RAM 1500 4WD

Vehicle Fitment

2020 RAM 1500 4WD
2020 RAM Rebel 4WD
*non air-ride models only

Rec'd Wheel/Tire Specs

35x12.50 tires on 17x9 wheels with 4.5" BS
35x12.50 tires on 18x9/20x9 wheels with 4.5"-5" BS

Available Accesories

#122251 - Performance UCA Kit

Product Info

#1664F – 2” Coilover System
#1664FDSC – 2” DSC Coilover System

#1663H - 4" Lift System w/ NX2 Shocks (standard bore knuckles)
#1663FS - 4" Lift System w/ FOX Shocks (standard bore knuckles)
#1664H - 4" Lift System w/ NX2 Shocks (large bore knuckles)
#1664FS - 4" Lift System w/ FOX Shocks (large bore knuckles)

#1661H – 6” Lift System w/ NX2 Shocks (standard bore knuckles)
#1661FS – 6” Lift System w/ FOX Shocks (standard bore knuckles)
#1661F – 6” Coilover System (standard bore knuckles)
#1661FDSC – 6” DSC Coilover System (standard bore knuckles)

#1662H – 6” Lift System w/ NX2 Shocks (large bore knuckles)
#1662FS – 6” Lift System w/ FOX Shocks (large bore knuckles)
#1662F – 6” Coilover System (large bore knuckles)
#1662FDSC – 6” DSC Coilover System (large bore knuckles)

 

 

Install Time/Difficulty

10 Hours / 4 of 5

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

2" Coilover Systems: These kits are designed to be so much more than just a "leveling kit" offering next level performance and comfort. At the heart of these kits are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers preset and ready to perform right out of the box. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. Additionally a pair of performance upper control arms (UCAs) are used to improve strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package.

4" and 6" Lift Systems: Stepping up to 4" and 6" heights BDS offers complete IFS lift systems designed to correct suspension, steering, and drivetrain geometry with clearance for 35-37" tires. At either height a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. Heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering linkage with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS’s multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on the 4” lifts comes from an easy to install top mounted strut spacer to maintain ride quality and handling characteristics. On the 6” lifts you have the option of a combination top mounted strut spacer and preload spacers designed to not over extend the suspension during droop travel.. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.

In the rear of these 4" or 6" kits are a pair of 3" or 5" ProRide dual rate coil springs to lift and level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.

6" Coilover Systems: Building on the BDS lift systems these coilover systems up the ante for next level performance. In place of the factory strut + strut spacer these systems upgrade to FOX 2.5 factory race series coilovers with a remote reservoir for improved damper performance. These coilovers are available with or without the optional DSC (dual speed compression) adjustment built in. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The optional DSC adjustment technology builds on the racing pedigree of the FOX 2.5 remote reservoir coilovers adding easy tuning of the vehicle’s suspension compression dampening to dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high-speed compression as well as 10 adjustment points for the low-speed compression allowing you to make large or small changes to further improve your performance for your particular needs. These pair with the 1/4" steel laser cut high clearance crossmembers, the heavy duty front skid plate system and ductile iron steering knuckles to correct suspension and steering geometry. Also included are replacement tie rod ends, front differential relocation brackets, a billet aluminum front driveshaft spacer, stainless steel braided brake line and sway bar relocation brackets. In the rear a pair of 5" ProRide dual rate coil springs to lift and level the stance along with control arm relocation brackets, rear track bar relocation bracket, extended length sway bar links and bump stop extensions along with FOX 2.0 IFP performance series gas shocks to offer improved damper performance. Take your RAM to the next level with BDS and FOX.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension has updated current listings to include the 2020 RAM 2500 and RAM 3500 4WD trucks. Currently available in 2", 3" and 4" lift heights, these lift options improve the look, performance, and capability of your late model RAM HD with clearance for up to 37". These kits carry over from 2019 models and have been confirmed compatible with the 2020 RAM HD trucks. As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2020 RAM 2500 or RAM 3500 with BDS Suspension.

Product Description

2020 RAM 2500/3500 Lift Kits

Vehicle Fitment

2019-2020 RAM 2500 4WD
2019-2020 RAM 3500 4WD
 *non-air ride models only

Recommended Tire/Wheel Fitment

RAM 2500
2" Kit - 35x12.50-17 w/17 x 9 and 5" BS
3" Kit - 35x12.50 w/17x9/18x9/20x9 and 4.5-5" BS
4" Kit - 37x12.50 w/17x9/18x9/20x9 and 5.625" BS

RAM 3500
2" Kit - 35x12.50 w/17x9/18x9/20x9 and 5" BS
4" Kit  - 37x12.50 w/17x9/18x9/20x9 and 5.625" BS

Kit Info

2019-2020 RAM 2500 4WD
#695H - 2" Leveling Kit-  $391.51 MSRP
#695FS -
2" Leveling Kit with FOX shocks - $793.47 MSRP
#1653H - 3" Radius Arm Lift Kit - $1,957.80 MSRP
#1653FS - 3" Radius Arm Lift Kit w/ FOX shocks - $2,359.76 MSRP
#1660H - 4" Radius Arm Lift Kit - $2,355.88 MSRP
#1660FS -
4" Radius Arm Lift Kit w/ FOX shocks - $2,757.84 MSRP

2019-2020 RAM 3500 4WD
#694H - 2" Leveling Kit - $391.51 MSRP
#694FS - 2" Leveling Kit with FOX shocks - $793.47 MSRP
#1656H - 4" Radius Arm Lift Kit - $2,123.78 MSRP
#1656FS - 4" Radius Arm Lift Kit w/ FOX shocks - $2,525.74 MSRP

*** Check the BDS website or verify details prior to ordering parts to ensure information is up to date with current manufacturing offerings

Available Accessories

#122324 - HD Adj Track Bar
#55382/85422 - NX2 Dual Stabilizer Kit
#55382/98224016 - FOX 2.0 Dual Stabilizer Kit
#122407/123409 - Recoil Track Bars (3500 only)

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

2" Leveling Kits: These kits are designed to take advantage of the RAM HDs stout factory suspension. Designed to raise the front 2" to level out the stance, this kit uses a pair of heavy-duty steel fabricated coil spacers allowing clearance for 35" tires to be installed. The spacers are pitched and indexed to work with the unique coil mount design of the late model RAM HD trucks and are secured to the coil bucket to maintain proper indexing when the coil springs are unloaded. With the additional ride height the front bump stops are replaced with taller polyurethane units to control suspension compression. Rounding out these leveling kits is your choice of BDS NX2 gas series or FOX 2.0 IFP performance gas shocks at all four corners to improve ride quality.

3" Lift Kits: These 3" lift kits are lift and level the stance with room for 35" tires. They use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle along with extended length sway bar links, extended polyurethane bump stops. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance. In the rear of the 2500 kits are 1.25" steel fabricated coil spacers to level out the stance and maintain load capacity along with extended length sway bar links, rear bump stop extensions, a rear track bar and your choice of gas shocks. For the 3500 kits you’ll receive rear lift blocks and longer u-bolts, along with your choice of gas shocks to improve performance.

4" Lift Kits: These 4" lift kits lift and level the stance with clearance for up to 37" tires. They use a pair of 4" progressive rate coil springs to provide the extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to recenter the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember to allow clearance for the front driveline once indexed using the supplied transfer case indexing ring. In the rear of the RAM 2500 kits replacement 2.5" progressive rate coil springs are used along with extended length sway bar links, rear bump stop extensions, a rear track bar and your choice of gas shocks. For the 3500 kits you’ll receive rear lift blocks and longer u-bolts, along with your choice of gas shocks to improve performance.

In addition to these existing kits, several new kit sizes and options are nearing completion on the development side. Keep an eye out for additional releases coming out soon.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

Take your LiveValve equipped 2019-2020 Ford Raptor to new heights with the new 4" high clearance lift system from BDS Suspension. These new systems are based off the tried and true F150 lift systems now updated with lower strut extensions and rear shock brackets to maintain LiveValve compatibility and allow clearance for 37" tires. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, FMVSS No.126 ESC System compatibility and a 5-year 60,000-mile drivetrain warranty.

Product Description

4" Lift Systems for the 2019+ Ford Raptor

Vehicle Fitment

2019-2020 Ford F150 Raptor

Important Notes

  • Required frame bracket modification and welding.
  • Stock wheels cannot be reinstalled with lift.
  • Check for proper tie rod end clearance if using 37x12.50 tires on 18x9 (5" BS) wheels

*Attn State of California consumers: Prop 65 Warning

Product Info

#1558H - 4" Lift System -$2,315.77

Install Time/Difficulty

9-10 Hours / 3 of 5

Features/Benefits

  • High clearance 1/4" steel crossmembers and ductile iron steering knuckles to add strength while correcting suspension geometry.
  • Heady Duty skid plate and compatibility with factory front skid for offroad protection.
  • Multipoint differential relocation brackets to maintain factory CV operating angles.
  • Lower strut extensions and rear shock brackets to allow use of factory installed FOX coilovers/shocks.
  • Levels out the stance and allows clearance for 37" tires.

Rec'd Wheel/Tire Specs

37x12.50 Tires on 20x9 Wheels with 5"-5.5" BS
37x12.50 Tires on 18x9 Wheels with 5" BS

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension is now offering 4" High Clearance Lift Systems for the late model 2019-2020 Ford F150 Raptor trucks. Designed to take full advantage of the Raptor’s FOX LiveValve front coilovers and rear shocks, this new systems improve ground clearance with clearance for 37" tires while maintaining ride quality and handling characteristics.

There are several similarities between the Ford Raptor and standard F150 chassis allowing BDS to integrate several of the existing FMVSS No.126 (ESC system) compliant F150 kit components into this new Raptor system. Up front this 4" system utilizes a pair of 1/4" thick one-piece laser cut steel high clearance crossmembers to reposition the SVT lower control arm along with a multipoint differential relocation system and heavy duty differential skid plate. This creates a solid subframe and gives additional offroad protection whether you are charging through the open desert of out on a backcountry trail. A pair of CNC-machined ductile iron steering knuckles are supplied to reposition front tie rod mounts and integrate with the factory control arms. For these newer LiveValve-equipped Raptors lower strut extensions are supplied to provide the 4" lift. These allow additional suspension clearance are allow use of the FOX LiveValve shock package. Also included are sway bar relocation brackets to maintain correct operating angles, alignment cam bolts, a billet aluminum front driveshaft spacer, brake line brackets to allow adequate slack at full suspension droop, and new front skid mounting brackets to reposition the signature Raptor front aluminum skid plate.

Out back BDS supplies a 5" block and u-bolt kit replace the factory block and level the stance of the Raptor along with a 4" rear block option for a lower "prerunner" stance. The rear blocks include a bump stop wing for proper bump stop engagement offroad. Also supplied are a pair of axle mounted shock extension brackets to work with the Raptor's LiveValve FOX piggyback shocks. As with all BDS suspension lifts, this new Ford Raptor 4" lift kit is backed by Factory Protection Plus giving you the confidence to use it and abuse it out on the trail. Take your new Raptor to new heights with BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com