PR378-1

BDS Suspension is now shipping complete 3" radius arm systems for the 2019+ RAM 2500 4WD trucks. These kits have been engineered to improve on-road comfort and handling while enhancing offroad capability. These kits include high strength tubular radius arms, front progressive rate coil springs, rear coil spacers to level out the stance, your choice of gas shocks, HD track bar and more to allow clearance for 35" tires. As with all BDS Suspension systems these new 3" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

3" Radius Arm Systems for 2019+ RAM 2500 - Diesel w/ Rear Coil Springs

Vehicle Fitment

2019 RAM 2500 Diesel

Rec'd Wheel/Tire Specs

35x12.50 tires on 17x9/18x9/20x9  wheels with 4.5-5" BS

Product Info

#1653H - 2019 Ram 2500 3" Radius Arm Diesel - Rear Coil Springs - NX2 Shocks - $1,957.80
#1653FS - 2019 Ram 2500 3" Radius Arm Diesel - Rear Coil Springs - Fox Shocks - $2,359.76

Features/Benefits

  • Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
  • High strength progressive rate front coil springs for a great ride on any terrain
  • HD adjustable front track bar and rear relocation bracket to correctly position both axles under the truck
  • F/R sway bar links and bump stop extensions to maintain functionality.
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for 35" tires

Install Time/Difficulty

5 Hours / 3 of 5

Important Notes

  • Will not fit rear air-ride equipped models
  • Will not fit Power Wagon models
  • Kit designed for diesel models only

*Attn State of California consumers: Prop 65 Warning

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension expands its listings for the late model 2019+ RAM 2500 4WD Diesel trucks with new 3” radius arm systems that are on the shelf ready to ship. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle. A pair of extended length sway bar links correct the OEsway bar operating angle for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 2500 kits a pair of 1.25" steel fabricated coil spacers are used to level out the stance and maintain load capacity. Extended length sway bar links correct sway bar operating angle for optimal performance and a longer rear bump stop correctly limit compression travel. The rear axle is recentered under the vehicle with the use of a heavy duty axle mounted relocation bracket. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 3" radius arm systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR373-1

BDS Suspension is now shipping complete 4" radius arm systems for the 2019+ RAM 3500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms, progressive rate coil springs, your choice of gas shocks, steering correction and more allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 4" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

4" Radius Arm Systems for 2019+ RAM 3500 Trucks

Vehicle Fitment

2019 RAM 3500 Diesel 4WD

Features/Benefits

  • Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
  • High strength progressive rate front coil springs for a great ride on any terrain
  • F/R HD track bar relocation brackets to correctly position both axles under the truck
  • Forged drop pitman arm to corect steering angles
  • F/R sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for up to 37” tires

Important Notes

  • T-case indexing ring available for 6-bolt and 8-bolt equipped models, check vehicle before ordering
  • Will not fit rear air-ride equipped models
  • Kit designed for diesel models only

*Attn State of California consumers: Prop 65 Warning

Rec'd Max Wheel/Tire Specs

37x12.50 Tires on 17x9/18x9/20x9 Wheels (5.625" BS)
35x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5" BS)

Install Time/Difficulty

7-8 Hours / 4 of 5

Related Kits/Products

#694H - 2" Leveling Kit for '19+ RAM 3500 Trucks
#1660H - 4" Radius Arm Systems for '19 RAM 2500 4WD

Product Info

6Bolt Tcase
#1656H - 4" Radius Arm System w/o Overload - Diesel -  NX2 Shocks - $2,123.78
#1656FS - 4" Radius Arm System w/o Overload - Diesel - FOX Shocks - $2,525.74
#1657H - 4" Radius Arm System w/ Overload - Diesel - NX2 Shocks - $2,123.78
#1657FS - 4" Radius Arm System w/ Overload - Diesel - FOX Shocks - $2,525.74

8Bolt Tcase
#1658H - 4" Radius Arm System w/o Overload - Diesel - NX2 Shocks - $2,123.78
#1658FS - 4" Radius Arm System w/o Overload - Diesel - FOX Shocks - $2,525.74
#1659H - 4" Radius Arm System w/ Overload - Diesel - NX2 Shocks -,$2,123.78
#1659FS - 4" Radius Arm System w/ Overload - Diesel -FOX Shocks - $2,525.74

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension expands its listings for the late model 2019+ RAM 3500 4WD Diesel trucks with new 4" radius arm systems that are on the shelf ready to ship. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (diesel specific) progressive rate 4" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to recenter the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. BDS offers these indexing rings for both the 6-bolt and 8-bolt equipped trucks. In the rear of the RAM 3500 kits a 3" block and u-bolt kit is used for a level-to-slightly tail-high stance while maintaing tow capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 4" radius arm systems from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR368-1

BDS Suspension expands its RAM coverage with new 4-6" lift systems specially designed for the 2013-2018 RAM 3500 4WD SRW/DRW trucks equipped with rear air bags. These kits add to BDS's extensive coverage for air-ride equipped RAM 1500, 2500, and 3500 trucks designed to lift and level the stance while maintain functionality of the auto leveling air bag system. Available in standard bracket and 4-link configurations. These RAM 3500 compatible kits are designed for stellar on-road handling and ride quality while improving offroad capability with clearance for up to 37s. Get the stance and performance for your rear air ride equipped RAM 3500 with these new 4-6" lift systems from BDS Suspension.

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

Product Description

4" & 6" Lift Systems for RAM 3500 w/ Rear Air (Diesel)
4" & 5.5" Lift Systems for RAM 3500 w/ Rear Air (Gas)

Vehicle Fitment

2013-2018 RAM 3500 4WD w/ Rear Air (Diesel)
2013-2018 RAM 3500 4WD w/ Rear Air (Gas)
*SRW and DRW

Rec'd Max Wheel/Tire Specs

4" Lift Kits
37x12.50 Tires on 17x9-18x9/20x9 Wheels (5.625” BS)
35x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5" BS)

5.5-6" Lift Kits
37x13.50 Tires on 17x9-18x9/20x9 Wheels (5.625” BS)
37x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5" BS)
*other sizes can be used, trimming may be necessary

*** Prior to ordering, verify listings with BDS sales team to ensure listings are up to date ***

Kit Features

  • Progressive rate coil springs for optimal ride quality on-road and improved performance off-road.
  • HD track bar bracket and drop pitman arm to correct steering angles and maintain handling.
  • Standard kits use radius arm drop brackets to maintain factory-like suspension geometry
  • 4-Link kits convert from radius arms for improved handling, strength and control.
  • Rear airbag spacers retain auto-leveling functionality once lifted while not affecting ride quality.
  • Choice of precision tuned BDS NX2 gas or FOX 2.0 performance series gas shocks.
  • Allows clearance for 37" tires

Kit Info

Diesel Trucks
1643H - 4" Standard Kit w/ Rear Air - $1,482.02 msrp
1644H - 4" 4-Link System w/ Rear Air - $2,241.48 msrp
1647H - 6" Standard Kit w/ Rear Air - 6Bolt - $2,069.60 msrp
1648H - 6" 4-Link System w/ Rear Air - 6Bolt - $2,771.69 msrp
1649H - 6" Standard Kit w/ Rear Air - 8Bolt - $2,154.86 msrp
1650H - 6" 4-Link System w/ Rear Air - 8Bolt - $2,856.95 msrp

Gas Trucks
1645H - 4" Standard Kit w/ Rear Air - $1,482.02 msrp
1646H - 4" 4-Link System w/ Rear Air - $2,241.48 msrp
1651H - 5.5" Standard Kit w/ Rear Air - 1,926.97 msrp
1652H - 5.5" 4-Link System w/ Rear Air - $2,629.06 msrp

Available Accessories

#122615 - Front Dual Shock Hoop Kit
   #85759 (x4) - NX2 Shocks for Dual Hoop (or)
   #98224759 (x4) - FOX 2.0 Shocks for Dual Hoop

#85427 - NX2 Single Steering Stabilizer
#98224018 - FOX 2.0 Single Steering Stabilizer
#55370 - Dual Steering Stabilizer Bracket Kit
   #85422 - NX2 Steering Stabilizer (2 req'd) (or)
   #98224016 - FOX 2.0 Steering Stabilizer (2 req'd)

#122414 - Front Sway Bar Disconnects
#102003 - Front SS Brake Lines pr.
#122613 - 6-Bolt T-Case Indexing Ring Kit (4" kits)
#122813 - 8-Bolt T-Case Indexing Ring Kit (4" kits)
#122405 - Carrier Bearing Drop Kit

Install Time / Difficulty

6-7 Hours / 3 of 5

Coldwater, MI: BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped 2013-2018 RAM 3500 4WD trucks. Available in 4" and 6" lift heights with either standard (drop bracket) or 4-link conversion and gas-or-diesel spec'd progressive rate coil springs these new RAM 3500 kits are designed to improve the performance, functionality, and curb appeal of your late model RAM 3500 while retaining the handling characteristics and functionality of your RAMs auto-leveling air bag system. All kits are offered with your choice of BDS NX2 series gas shocks or upgrade to the precision tuned FOX 2.0 gas shocks for superior performance as well as several optional accessories to include steering stabilizers, dual shock hoops, traction bars and more.

4" Standard Lift Kits: These standard kits are designed to retain the factory radius arms by relocating the frame mounting location using a pair of 1/4" steel drop brackets to maintain suspension geometry. The drop brackets key off the factory mounts and tie into the frame for extra strength. Also included in the kit are specially designed gas or diesel engine specific progressive rate ProRide front coil springs offering improved performance across all terrains. Also included is a heavy-duty fabricated front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar links, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. Rounding out the kits is your choice of BDS NX² series gas shocks or FOX 2.0 performance gas shocks at each corner. These kits allow for 35-37" tires to be installed.

4" 4-Link Lift Kits: These kits are designed to convert the factory radius arm over to a stronger 4-link design offering improved stability, handling and articulation. The kit is designed with 1/4" fabricated 4-link brackets that key into the factory radius arm pockets for added strength. The 4-link design improves handling and drivability by limiting castor change to less than 1-degree throughout wheel travel. These kits also include gas or diesel engine specific progressive rate front ProRide coil springs, front and rear track bar brackets, a forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. Rounding out the kits is your choice of BDS NX2 series gas shocks or FOX 2.0 performance gas shocks at each corner. These kits allow for 35-37" tires to be installed.

5.5-6" Standard Lift Kits: These standard kits are designed to retain the factory radius arms by relocating the frame mounting location using a pair of 1/4" steel drop brackets to maintain suspension geometry. The drop brackets key off the factory mounts and tie into the frame for extra strength. Also included in the kit are specially designed (5.5") gas or (6") diesel engine specific progressive rate ProRide front coil springs offering improved performance across all terrains. Also included is a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember and (6-bolt or 8-bolt) transfer case indexing ring, rear block, and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed.

5.5-6" 4-Link Lift Kits: These lift systems are designed to convert the factory radius arm over to a stronger 4-link design offering improved stability, handling and articulation. The kit is designed with 1/4" fabricated 4-link brackets that key into the factory radius arm pockets for added strength. The 4-link design improves handling and drivability by limiting castor change to less than 1-degree throughout wheel travel. These kits also include (5.5") gas or (6") diesel engine specific progressive rate front ProRide coil springs, a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember, and (6-bolt or 8-bolt) transfer case indexing ring, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed.

Media GALLERY

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

New for 2019 the RAM HD truck platform features more refinement inside and out. BDS is excited to announce the first of several suspension options to come available for the 2019 RAM 3500 4WD truck with 2” leveling kits. These leveling kits are actually a carry over from 2013-2018 RAM HD models, now approved for use on the 2019 RAM 3500 trucks. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty.

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

Product Description

2" Leveling Kits

Kit Info

#694H - (2” Leveling Kit w/ NX2 shocks) - $381.75

Vehicle Fitment

2019 RAM 3500 4WD (gas and diesel)
2013-2018 RAM 3500 4WD

Kit Features

- High strength steel coil spacers with textured black finish
- Spacers are pitched and indexed to improve coil spring positioning
- Extended length polyurethane bump stops properly limit up travel
- Kit will lift and level the vehicle stance while retaining ride quality
- Allows fitment of up to 35" tires

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

Available Accessories

#98224710 - FOX 2.0 Front Shock (2 req
#98224759 - FOX 2.0 Rear Shock (2 req
#122321 - HD Radius Arm Kit
*additional accessories coming soon

Wheel/Tire Fitment

35x12.50 Tires on 17x9/18x9/20x9 Wheels (5” BS)
*other sizes can be used, trimming may be necessary

Coldwater, MI: BDS Suspension is now offering 2” leveling kits for the redesigned 2019 RAM 3500 4WD trucks. These kits carry over from the 2013-2018 RAM HD models and have ben approved for use on the 2019 RAM 3500 trucks. Designed to lift and level the stance, this kit uses a pair of heavy-duty steel fabricated coil spacers allowing clearance for 35" tires to be installed. The spacers are pitched and indexed to work with the unique coil mount design of the late model RAM HD trucks and are secured to the coil bucket to maintain proper indexing when the coil springs are unloaded. With the additional ride height the front bump stops are replaced with taller polyurethane units to control suspension compression. Rounding out these leveling kits is your choice of BDS NX2 gas series or FOX 2.0 IFP performance gas shocks at all four corners to improve ride quality. These leveling kits include Factory Protection Plus giving you piece of mind out of the trail with BDS’s exclusive no fine print warranty, ESC system compatibility and a 5-year 100,000mile drivetrain warranty. Level your new RAM 3500 out with BDS Suspension.

Media Gallery

2019 Ford Ranger 2" Leveling Kits
2019 Ford Ranger 2" Leveling Kits
2019 RAM 3500 2" Leveling Kits

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR332

The all new 2019 RAM 1500 trucks bring even more refinement to the RAM lineup. Along with the redesigned body and interior the chassis and suspension has been updated from previous model year trucks. After months of design, testing and American manufacturing BDS Suspension is excited to announce the release the first of many new kits for the new RAM with 6” IFS Lift Systems for the 2019 RAM 1500 4WD trucks. These new systems are built to the highest quality standards for on-road comfort and handling, while improving offroad capability with clearance for 35-37” tires. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty.

Product Description

6” IFS Lift Systems
for the 2019 RAM 1500

Vehicle Fitment

2019 RAM 1500 4WD*
2019 RAM 1500 Rebel 4WD*
*non-AirRide only

Available Accessories

#98224751 - FOX 2.0 Rear Shock
#122251 - Performance UCA Kit

Kit Info

#1637H - 6” IFS System w/ NX2 - $1925.17
#1637FS - 6” IFS System w/ FOX - $2076.07

Kit Features

- Corrects suspension, steering, & driveline geometry
- High clearance crossmembers and diff skid designed to maximize ground clearance and offer protection
- Ductile iron steering knuckles for strength and ESC system compatibility
- Differential relocation brackets to correct CV angles
- Top mounted strut spacer retains factory ride quality
- Allows fitment of up to 37" tires

Rec'd Max Wheel/Tire Specs

37x12.50 Tires on 17x9 Wheels (4.5” BS)
37x12.50 Tires on 18x9/20x9 Wheels (4.5-5” BS)
*other sizes can be used, trimming may be necessary

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

** Prior to ordering, verify listings with BDS sales team to ensure listings are up to date **

Media GALLERY

6" Lift Kit - 2019 Dodge Ram
2019 RAM Rebel with BDS 6" Lift Kit
2019 RAM Rebel with BDS 6" Lift Kit
2019 RAM Rebel with BDS 6" Lift Kit

BDS 6" RAM 1500 Lift Systems: With an all new truck comes an all new suspension. Now available for the 2019 model year RAM 1500 4WD trucks BDS Suspension has released new 6” IFS lift systems. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your new RAM. This new 6” lift system is the first of many new BDS options to come available for the new trucks bringing you on road comfort, off-road capability and clearance for 35-37” tires.

At the heart of this new 6” system BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS’s multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers along with a preload spacers to maintain ride quality and handling characteristics. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.

In the rear of this 6” lift system the factory coil springs are replaced with 5” ProRide dual rate coil springs to lift and level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 RAM 1500 truck with this new 6” lift system from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR314

BDS Suspension expands its RAM product coverage with new 4" lift systems now shipping for late model 2014-2018 RAM 2500 Power Wagon trucks. Designed to maintain on-road ride quality and handling while improving offroad capability with clearance for 37s, these kits lift and level the stance for the look and performance Power Wagon owners are looking for. Take your late model RAM 2500 Power Wagon to the next level with this new 4" lift kit from BDS Suspension. As with all BDS lift kits, these new Power Wagon kits are backed by Factory Protection Plus with BDS's No Fine Print Warranty and a 5-year, 100,000-mile drivetrain warranty so you can go hit the trail with confidence.

Product Description

4" Lift System

Vehicle Fitment

2014-2018 RAM 2500 Power Wagon

Factory Protection Plus

  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

** Prior to ordering, verify listings with BDS sales team to ensure listings are up to date **

Kit Info

[#1636H] - $1794.33 msrp
(1) #032401 Front Coil Box
(1) #012402 Front Box Kit
(1) #012256 Rear Box Kit
(1) #122616 T-Case Indexing
(2) #85752 Front NX2 Shock
(2) #85757 Rear NX2 Shock

Rec'd Max Wheel/Tire Specs

37x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5-5" BS)

*Additional wheel/tire sizes can be used, however may require additional trimming.

Available Accessories

FOX 2.0 Shocks (#98224752/98224756)
Dual Shock Hoop Kit (#122615)
- NX2 or FOX 2.0 shocks (4x #85759 or #98224759)
NX2, 9500 or FOX 2.0 Single Stabilizer Kit
- #85427 or #95427 or #98224018
Dual Steering Stabilizer Brackets (#55370)
- Dual NX2 Stabilizer (2x #85422 )
- Dual 9500 Stabilizer (2x #95422)
- Dual FOX 2.0 Stabilizer (2x #98224016)
Adjustable Front Track Bar (#122314)
Adjustable Rear Track Bar (#122609)
Extended SS Front Brake Lines (#102003)
*visit website for full accessory list

Media GALLERY

4" Lift Kit - Power Wagon

RAM Power Wagon with BDS 4" Lift Kit

RAM Power Wagon with BDS 4" Lift Kit

RAM Power Wagon with BDS 4" Lift Kit

BDS 4" Air Ride RAM 2500 Lift Systems: BDS Suspension takes the late model RAM 2500 Power Wagon to the next level with new 4" lift systems now in stock ready to ship. These 4" systems are designed to maintain on-road handling while improving offroad capability with clearance for 37" tires. At the heart of these new systems are dual rate front coil springs designed for a full 4" of lift on the Power Wagon along with your choice of NX2 gas or FOX 2.0 IFP performance gas shocks for impressive ride quality and performance. The factory radius arms are repositioned using a pair of specially designed 1/4" thick drop brackets specific to the Power Wagon that key off the factory frame mounts for strength and rigidity. Steering correction comes from a forged drop pitman arm that is used in combination with a heavy duty track bar drop bracket to keep the steering angles in phase for predictable handling. Also supplied for the front are extended bump stops, brake line relocation brackets and sway bar relocation to retain functionality of the factory electronic sway bar disconnects.

At 4" of lift the transfer case needs to be indexed to allow the front driveshaft to function properly. BDS supplies a high strength indexing ring with ARP studs along with a replacement high clearance transmission crossmember and billet driveshaft extension allowing the factory front and rear driveshafts to be reinstalled. In the rear a pair of replacement HD dual rate coil springs are supplied to level the stance while providing a great ride and maintain tow capacity. These springs paired your choice of NX2 gas or FOX 2.0 performance gas shocks provide impressive on and off-road performance. A heavy duty rear track bar bracket is supplied to correct track bar operating angle and recenter the rear axle under the truck. Rounding out this kit are a pair of extended rear sway bar links and all the necessary hardware to complete the install on your late model Power Wagon.

Additionally BDS offers several accessories for further enhance your Power Wagon's performance including dual front shocks kits, single and dual steering stabilizer kits, front and rear HD adjustable track bars and extended SS front brake lines. Take your late model Power Wagon to the next level with BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com