BDS Suspension is now shipping complete 3" radius arm systems for the 2019+ RAM 3500 4WD trucks. These kits have been engineered to improve on-road comfort and handling while enhancing offroad capability. These kits include high strength tubular radius arms, front progressive rate coil springs, rear coil spacers to level out the stance, your choice of gas shocks, HD track bar and more to allow clearance for 35" tires. As with all BDS Suspension systems these new 3" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

BDS 3" Radius Arm Systems for RAM 3500 Trucks

Vehicle Fitment

2019 + RAM 3500 4WD Diesel Trucks

Install Time / Difficulty

5 hours / 3 of 5

Product Info

#BDS1654H – 3" Radius Arm System w/ NX2 Shocks (w/ overload) - $2,039.89
#BDS1654FS - 3" Radius Arm System w/ FOX Shocks (w/ overload) - $2,441.85
#BDS1655H  – 3" Radius Arm System w/ NX2 Shocks (w/o overload) - $1,839.90
#BDS1655FS – 3" Radius Arm System w/ FOX Shocks (w/o overload) - $2,441.85

Features/Benefits

  • Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
  • High strength progressive rate front coil springs for a great ride on any terrain
  • HD adjustable front track bar and rear relocation bracket to correctly position both axles under the truck
  • Front sway bar links and bump stop extensions to maintain functionality.
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for 35" tires

Recommended Wheel/Tire Specs

35x12.50 Tires on 18x9 Wheels w/ 4.5-5" BS
35x12.50 Tires on 20x9 Wheels w/ 4.5-5" BS

Important Notes

  • Will not fit rear air-ride equipped models
  • Kit designed for diesel models only
  • Will not fit Power Wagon models

*Attn State of California consumers: Prop 65 Warning

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension expands its listings for the late model 2019+ RAM 3500 4WD Diesel trucks with new 3” radius arm systems that are on the shelf ready to ship. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle. A pair of extended length sway bar links correct the OE sway bar operating angle for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 3500 kits a pair of 2" steel fabricated lift blocks and extended u-bolts are used to provide a level to slightly tail high stance while maintaining load capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 3" radius arm systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR384-1

BDS Suspension is now shipping lift kits for the 2020 RAM 1500 4WD trucks. Currently available in 2", 4" and 6" lift heights, these lift options improve the look, performance, and capability of your late model RAM 1500 with clearance for up to 37". While there are several similarities between the 2019 and 2020 models, ultimately due to a few minor changes on the trucks the kits have been updated for fitment specifically on the 2020 model trucks. As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2020 RAM with BDS Suspension.

Product Description

BDS 2" / 4" / 6" Lift Systems
for 2020 RAM 1500 4WD

Vehicle Fitment

2020 RAM 1500 4WD
2020 RAM Rebel 4WD
*non air-ride models only

Rec'd Wheel/Tire Specs

35x12.50 tires on 17x9 wheels with 4.5" BS
35x12.50 tires on 18x9/20x9 wheels with 4.5"-5" BS

Available Accesories

#122251 - Performance UCA Kit

Product Info

#1664F – 2” Coilover System
#1664FDSC – 2” DSC Coilover System

#1663H - 4" Lift System w/ NX2 Shocks (standard bore knuckles)
#1663FS - 4" Lift System w/ FOX Shocks (standard bore knuckles)
#1664H - 4" Lift System w/ NX2 Shocks (large bore knuckles)
#1664FS - 4" Lift System w/ FOX Shocks (large bore knuckles)

#1661H – 6” Lift System w/ NX2 Shocks (standard bore knuckles)
#1661FS – 6” Lift System w/ FOX Shocks (standard bore knuckles)
#1661F – 6” Coilover System (standard bore knuckles)
#1661FDSC – 6” DSC Coilover System (standard bore knuckles)

#1662H – 6” Lift System w/ NX2 Shocks (large bore knuckles)
#1662FS – 6” Lift System w/ FOX Shocks (large bore knuckles)
#1662F – 6” Coilover System (large bore knuckles)
#1662FDSC – 6” DSC Coilover System (large bore knuckles)

 

 

Install Time/Difficulty

10 Hours / 4 of 5

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

2" Coilover Systems: These kits are designed to be so much more than just a "leveling kit" offering next level performance and comfort. At the heart of these kits are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers preset and ready to perform right out of the box. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. Additionally a pair of performance upper control arms (UCAs) are used to improve strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package.

4" and 6" Lift Systems: Stepping up to 4" and 6" heights BDS offers complete IFS lift systems designed to correct suspension, steering, and drivetrain geometry with clearance for 35-37" tires. At either height a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. Heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering linkage with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS’s multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on the 4” lifts comes from an easy to install top mounted strut spacer to maintain ride quality and handling characteristics. On the 6” lifts you have the option of a combination top mounted strut spacer and preload spacers designed to not over extend the suspension during droop travel.. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.

In the rear of these 4" or 6" kits are a pair of 3" or 5" ProRide dual rate coil springs to lift and level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.

6" Coilover Systems: Building on the BDS lift systems these coilover systems up the ante for next level performance. In place of the factory strut + strut spacer these systems upgrade to FOX 2.5 factory race series coilovers with a remote reservoir for improved damper performance. These coilovers are available with or without the optional DSC (dual speed compression) adjustment built in. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The optional DSC adjustment technology builds on the racing pedigree of the FOX 2.5 remote reservoir coilovers adding easy tuning of the vehicle’s suspension compression dampening to dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high-speed compression as well as 10 adjustment points for the low-speed compression allowing you to make large or small changes to further improve your performance for your particular needs. These pair with the 1/4" steel laser cut high clearance crossmembers, the heavy duty front skid plate system and ductile iron steering knuckles to correct suspension and steering geometry. Also included are replacement tie rod ends, front differential relocation brackets, a billet aluminum front driveshaft spacer, stainless steel braided brake line and sway bar relocation brackets. In the rear a pair of 5" ProRide dual rate coil springs to lift and level the stance along with control arm relocation brackets, rear track bar relocation bracket, extended length sway bar links and bump stop extensions along with FOX 2.0 IFP performance series gas shocks to offer improved damper performance. Take your RAM to the next level with BDS and FOX.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension has updated current listings to include the 2020 RAM 2500 and RAM 3500 4WD trucks. Currently available in 2", 3" and 4" lift heights, these lift options improve the look, performance, and capability of your late model RAM HD with clearance for up to 37". These kits carry over from 2019 models and have been confirmed compatible with the 2020 RAM HD trucks. As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2020 RAM 2500 or RAM 3500 with BDS Suspension.

Product Description

2020 RAM 2500/3500 Lift Kits

Vehicle Fitment

2019-2020 RAM 2500 4WD
2019-2020 RAM 3500 4WD
 *non-air ride models only

Recommended Tire/Wheel Fitment

RAM 2500
2" Kit - 35x12.50-17 w/17 x 9 and 5" BS
3" Kit - 35x12.50 w/17x9/18x9/20x9 and 4.5-5" BS
4" Kit - 37x12.50 w/17x9/18x9/20x9 and 5.625" BS

RAM 3500
2" Kit - 35x12.50 w/17x9/18x9/20x9 and 5" BS
4" Kit  - 37x12.50 w/17x9/18x9/20x9 and 5.625" BS

Kit Info

2019-2020 RAM 2500 4WD
#695H - 2" Leveling Kit-  $391.51 MSRP
#695FS -
2" Leveling Kit with FOX shocks - $793.47 MSRP
#1653H - 3" Radius Arm Lift Kit - $1,957.80 MSRP
#1653FS - 3" Radius Arm Lift Kit w/ FOX shocks - $2,359.76 MSRP
#1660H - 4" Radius Arm Lift Kit - $2,355.88 MSRP
#1660FS -
4" Radius Arm Lift Kit w/ FOX shocks - $2,757.84 MSRP

2019-2020 RAM 3500 4WD
#694H - 2" Leveling Kit - $391.51 MSRP
#694FS - 2" Leveling Kit with FOX shocks - $793.47 MSRP
#1656H - 4" Radius Arm Lift Kit - $2,123.78 MSRP
#1656FS - 4" Radius Arm Lift Kit w/ FOX shocks - $2,525.74 MSRP

*** Check the BDS website or verify details prior to ordering parts to ensure information is up to date with current manufacturing offerings

Available Accessories

#122324 - HD Adj Track Bar
#55382/85422 - NX2 Dual Stabilizer Kit
#55382/98224016 - FOX 2.0 Dual Stabilizer Kit
#122407/123409 - Recoil Track Bars (3500 only)

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

2" Leveling Kits: These kits are designed to take advantage of the RAM HDs stout factory suspension. Designed to raise the front 2" to level out the stance, this kit uses a pair of heavy-duty steel fabricated coil spacers allowing clearance for 35" tires to be installed. The spacers are pitched and indexed to work with the unique coil mount design of the late model RAM HD trucks and are secured to the coil bucket to maintain proper indexing when the coil springs are unloaded. With the additional ride height the front bump stops are replaced with taller polyurethane units to control suspension compression. Rounding out these leveling kits is your choice of BDS NX2 gas series or FOX 2.0 IFP performance gas shocks at all four corners to improve ride quality.

3" Lift Kits: These 3" lift kits are lift and level the stance with room for 35" tires. They use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle along with extended length sway bar links, extended polyurethane bump stops. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance. In the rear of the 2500 kits are 1.25" steel fabricated coil spacers to level out the stance and maintain load capacity along with extended length sway bar links, rear bump stop extensions, a rear track bar and your choice of gas shocks. For the 3500 kits you’ll receive rear lift blocks and longer u-bolts, along with your choice of gas shocks to improve performance.

4" Lift Kits: These 4" lift kits lift and level the stance with clearance for up to 37" tires. They use a pair of 4" progressive rate coil springs to provide the extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to recenter the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember to allow clearance for the front driveline once indexed using the supplied transfer case indexing ring. In the rear of the RAM 2500 kits replacement 2.5" progressive rate coil springs are used along with extended length sway bar links, rear bump stop extensions, a rear track bar and your choice of gas shocks. For the 3500 kits you’ll receive rear lift blocks and longer u-bolts, along with your choice of gas shocks to improve performance.

In addition to these existing kits, several new kit sizes and options are nearing completion on the development side. Keep an eye out for additional releases coming out soon.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

This is one bad ass ride. Check out White Diamond; built by the team at Alberta Boys Custom. This 2018 RAM 2500 is built for on and offroad adventures. With the BDS 6" Suspension System, this truck has a smooth ride on road, while providing peace of mind when out on the trails. A lot of hard work goes into these builds; seeing the final product is always something we look forward to.

The Alberta Boys team goes all out for their reveal videos, so be sure to check out the one above as well as keep up on all their builds by following them on Facebook, Instagram, and YouTube.

Build Specs: 2018 Ram 2500

BDS 6" 4-Link Lift System
BDS Dual Steering Stabilizer Kit
37x13.50x22 Toyo M/T Tires
24x12 American Force Wheels
Bushwacker Pocketstyle Flares

PR381-1

BDS Suspension offers next level performance in a new smaller lift height with new 2" performance coilover systems for the 2019-2020 RAM 1500 4WD trucks. Designed to be so much more than a leveling kit, these new 2" coilover systems join the existing 4" and 6" lift options and have been specially designed to improve vehicle capability ride quality and strength. Offered with FOX 2.5 factory series remote reservoir coilovers (available with DSC adjustment), BDS performance series upper control arms (UCAs), and rear FOX 2.0 shocks these new systems are lift and level the stance with clearance for 33" tires. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty. Upgrade your new RAM 1500 with BDS and FOX.

Product Description

2019-2020 Ram 1500 2" Performance Coilover System

Product Info

#1664F - 2" Coilover System for '19+ RAM 1500 -$2,772.47
#1664FDSC - 2" DSC Coilover System for '19 RAM 1500 - $3,122.47

Features/Benefits

  • FOX 2.5 factory series remote reservoir coilovers for next level performance on any terrain.
  • Coilovers available with optional DSC adjusters to dial in high speed and low-speed compression settings.
  • Performance UCAs add strength and increase suspension travel.
  • Increased right height and levels front/rear stance with clearance for 33" tires.
  • Rear FOX 2.0 performance IFP gas shocks for improved performance.

Vehicle Fitment

2019-2020 RAM 1500 4WD Non-AirRide

Important Notes

  • Vehicles equipped with "Offroad or Rebel Package" will not achieve full 2" of lift, net ride height change will be around 1" above stock.
  • Will not fit vehicle equipped with factory Air Ride.
  • 33x12.50 tires cannot be installed on factory wheels due to clearance issue to the UCA. Aftermarket wheels with 33x12.50 tires or stock wheel with narrower tires required. Follow recommended tire/wheel specs.

*Attn State of California consumers: Prop 65 Warning

Related Kits/Products

#1638H - 4" Lift Systems for '19+ RAM 1500
#1637H/1637F - 6" Lift Systems for '19+ RAM 1500
#1641H - 4" Lift Systems for '19+ RAM 1500 w/ AirRide

Rec'd Wheel/Tire Specs

Stock Tires on Stock Wheel with Stock BS
295/65 Tires on 20x9 Wheels with 5" BS
33x12.50 Tires on 20x9 Wheels with 4.5" BS

Install Time/Difficulty

3 Hours / 3 of 5

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension ups the anty on 2019-2020 RAM 1500 performance with 2" coilover systems. Designed to be so much more than just a "leveling kit", these new coilover systems take advantage of the factory suspension geometry without overextending operating angles and offer next level performance in a smaller lift package. At the heart of these new 2" systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs above. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package.
As with all BDS kits these come ready to install right out the box with all hardware packs and step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 RAM 1500 truck with this new 2” Coilover System from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR378-1

BDS Suspension is now shipping complete 3" radius arm systems for the 2019+ RAM 2500 4WD trucks. These kits have been engineered to improve on-road comfort and handling while enhancing offroad capability. These kits include high strength tubular radius arms, front progressive rate coil springs, rear coil spacers to level out the stance, your choice of gas shocks, HD track bar and more to allow clearance for 35" tires. As with all BDS Suspension systems these new 3" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

3" Radius Arm Systems for 2019+ RAM 2500 - Diesel w/ Rear Coil Springs

Vehicle Fitment

2019 RAM 2500 Diesel

Rec'd Wheel/Tire Specs

35x12.50 tires on 17x9/18x9/20x9  wheels with 4.5-5" BS

Product Info

#1653H - 2019 Ram 2500 3" Radius Arm Diesel - Rear Coil Springs - NX2 Shocks - $1,957.80
#1653FS - 2019 Ram 2500 3" Radius Arm Diesel - Rear Coil Springs - Fox Shocks - $2,359.76

Features/Benefits

  • Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
  • High strength progressive rate front coil springs for a great ride on any terrain
  • HD adjustable front track bar and rear relocation bracket to correctly position both axles under the truck
  • F/R sway bar links and bump stop extensions to maintain functionality.
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for 35" tires

Install Time/Difficulty

5 Hours / 3 of 5

Important Notes

  • Will not fit rear air-ride equipped models
  • Will not fit Power Wagon models
  • Kit designed for diesel models only

*Attn State of California consumers: Prop 65 Warning

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension expands its listings for the late model 2019+ RAM 2500 4WD Diesel trucks with new 3” radius arm systems that are on the shelf ready to ship. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle. A pair of extended length sway bar links correct the OEsway bar operating angle for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 2500 kits a pair of 1.25" steel fabricated coil spacers are used to level out the stance and maintain load capacity. Extended length sway bar links correct sway bar operating angle for optimal performance and a longer rear bump stop correctly limit compression travel. The rear axle is recentered under the vehicle with the use of a heavy duty axle mounted relocation bracket. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 3" radius arm systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com