PR403-1

BDS Suspension adds new 5” high clearance lift systems for the 2020 Chevy and GMC 2500HD/3500HD trucks. These systems join existing 3" and 6.5" options to allow room for larger wheels/tires and improve offroad capability while maintaining on-road handling and comfort. These new suspension systems utilize the tried and true high-clearance IFS design that has made BDS the preferred suspension lift for late model GM HDs updated to correct suspension, steering and driveline geometry on the 2020 models. As with all BDS suspension systems these new 5" lift systems are backed by Factory Protection Plus offering you peace of mind for your adventure. This includes a BDS No Fine Print Warranty, ESC System compatibility and supplemental 5year-100,000mile drivetrain protection. Build your late model HD up right with BDS Suspension.

Product Description

5" High Clearance Lift System for 2020 Chevy/GMC HD Trucks

Product Info

766FS - 5" High Clearance Lift System w/ Fox Shocks (w/o Overloads)
767FS
- 5" High Clearance Lift System w/ Fox Shocks (w/ Overloads)

Vehicle Fitment

2020 Chevrolet Silverado 2500HD
2020 Chevrolet Silverado 3500HD
2020 GMC Sierra 2500HD
2020 GMC Sierra 3500HD
2020 GMC Denali 2500HD
2020 GMC Denali 3500HD

Available Accessories

#BDS55383/85430 - Steering Stabilizer Kit
#BDS121304 - BDS Upper Control Arm Kit
#BDS121612 - Carrier Bearing Drop Kit

Features/Benefits:

  • High Clearance design w/ no torsion bar drop maximizes ground clearance
  • Robust steering knuckles maintain ESC System compliance
  • Multi piece differential relocation brackets
  • HD skid plates for improved offroad protection
  • Choice of NX2 of FOX 2.0 gas shocks for improved performance
  • Factory Protection Plus included
  • Allows fitment for up to 37” tires

Rec'd Wheel/Tire Specs

37x12.50 Tires with 20x9 Wheels and 5-5.5" BS
35x12.50 Tires with 20x10 Wheels and 5-5.5" BS
35x12.50 Tires with 17x9/18x9 Wheels and 4.5-4.625" BS

Related Kits/Products

#BDS760FS/761FS - 3" Lift Kits
#BDS753FS/756FS - 6.5" Lift Kits

Important Notes

  • U-bolts will not work vehicles equipped with top-mounted overload springs or add-a-leafs.
  • Compatible with gas or diesel models.
  • Compatible with standard models as well as AT4 models.
  • Some minor trim will be required with certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks. Trimming will normally included the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet.
Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension adds complete 5" high clearance lift systems for the 2020 model year Chevy Silverado and GMC Sierra 2500HD and 3500 HD trucks. Based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, these systems have been designed from the ground up for the 2020 HDs to get the more out of these trucks with the most ground clearance on the market. These new 5" lift systems join existing 3" and 6.5" options bringing comfortable, handling, and capability with clearance for up to 37" tires. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality.

At the heart of this new 5" lift systems BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles are a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential to keep CV axle angles at a minimum. To help maximize clearance a pair of specially designed torsion bar relocations brackets are supplied to mount to the lower control arms to retain the factory high clearance frame mounted crossmember. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar along with extended length braided stainless steel brake lines. Rounding out the front of this kit are FOX 2.0 performance series IFP shocks.

In the rear of this 5" lift system, 3" lift blocks and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line relocation brackets allow the use of factory brake lines. Lastly a matching set of FOX 2.0 performance series IFP shocks are supplied to compliment the front setup. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC system compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2020 Chevy/GMC 2500/3500HD truck with this new 5" lift system from BDS Suspension.

 

Media Gallery

2020 GMC Sierra AT4 HD All-Mountain Concept (Not Available for Sale) (Photo by Matthew Staver for GMC)

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension is now shipping leveling kits, lift kits, and accessories for the 2021 Chevy/GMC 1500 Trucks.  Currently available in 3.5", 4", and 6" lift heights, BDS offers a variety of lift options to improve the look, performance, and capability of your late model GM truck with clearance for up to 37". Along with these lift options, BDS also offers several accessory options including: upper control arms, Recoil traction bars, and FOX shock/coilover options.  As with all BDS kits these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP is BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty.

Product Description

BDS 2.5", 4" 6" Lift Systems and Accessories for 2019-2021 Chevy/GMC 1500 Trucks

Vehicle Fitment

2019-2021 Chevy Silverado 1500 4WD
2019-2021 Chevy Silverado 1500 Trail Boss 4WD
2019-2021 GMC Sierra 1500 4WD
2019-2021 GMC Sierra 1500 AT4 4WD
2019-2021 GMC Denali 1500 4WD (w/ ARC)

Available Accessories:

121253 - Upper Control Arm (UCA) Kit
121409/123409 - Recoil Traction Bars

Silverado/Sierra 1500 Kits:

772FDSC/755FDSC - 3.5" DSC Coilover UCA Kits
748H/FS – 4” IFS Lift Kit (strut spacer)
748FSR – 4” (2.0 Snap Ring) Coilover Lift Kit
748F/FDSC 4” (2.5 Factory Race R/R) Coilover Lift Kit
746H/FS – 6” IFS Lift Kit (strut spacer)
746FSR – 6” (2.0 Snap Ring) Coilover Lift Kit
746F/FDSC 6” (2.5 Factory Race R/R) Coilover Lift Kit

Trail Boss/AT4 1500 Kits:

772FDSC/755FDSC - 1.5" DSC Coilover UCA Kits
754F/FDSC 2.5” (2.5 Factory Race R/R) Coilover Lift Kit
749H/FS – 4” IFS Lift Kit (strut spacer)
749F/FDSC 4” (2.5 Factory Race R/R) Coilover Lift Kit

*TB/AT4 trucks come 2" taller that standard 1500 models. Lift heights displayed are net lift amount (4" TB Kit is equivalent ride height of standard 1500 6" Kit)

Denali 1500 Kits:

750H/FS - 4" IFS Lift Kit (strut spacer)
747H/FS - 6" IFS Lift Kit (strut spacer)

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • FMVSS No.126 ESC System compliance
  • BDS’s exclusive No Fine Print Warranty
FMVV No.126 Compliant

3.5" Coilover Lift Systems: Ready for new level performance?! These 3.5" systems (nets 1.5" on TB/AT4) up your trucks ride quality, performance and capability by converting over to FOX 2.5 DSC coilovers. Also included for the front are high strength BDS upper control arms (UCA). These offer improved wheel travel, improved damper control and easy adjustability. In the rear a replacement block & u-bolt kit is used to level the stance and get the choice of FOX 2.0 IFP shocks or upgraded FOX 2.5 remote DSC to match the front. This kit allows clearance for 33-35" tires.

4"/6" Standard Lift Systems: These 4"/6" kits come complete with everything you need to properly lift your truck and allow clearance for up to 37" tires. Parts list includes high strength crossmembers, steering knuckles, tie rod ends, diff drop brackets, front and differential skid plates, top mounted strut spacers, sway bar relocation, brake line relocation, rear block kit and your choice of gas shocks.These systems are not only built for daily driving, but will handle most any offroad excursion you can think of and provide extra ground clearance and heavy duty skid plates. *Denali models include sensor brackets and rear shock relocation brackets to retain the ARC (adaptive ride control) system. **TB/AT4 models net 4" lift although ride height similar to 6" standard kit.

4"/6" Snap-Ring (2.0) Coilover Systems: Stepping up from the standard lift systems, these 4"/6" snap-ring coilover systems upgrade the standard top mounted strut spacers to FOX 2.0 performance series IFP snap-ring coilovers designed to be used with the factory coil spring and top plate for improved damper performance. In the rear FOX 2.0 performance series IFP shocks come standard to mathc the front performance. Other components include high strength crossmembers, steering knuckles, tie rod ends, diff drop brackets, skid plates, sway bar relocation, brake line relocation, and rear block kit. This system allow clearance for up to 37s.

4"/6" Remote Reservoir (2.5) Coilover Systems: If you're looking for the best, these are the systems for you. Building on the tried and true BDS high clearance design these kits maintain on-road handling and performance while upping the ante with FOX 2.5 factory series remote reservoir coilovers for truely next level performance on any terrain. These coilovers are available in standard or DSC adjustable versions and pair with a set of FOX 2.0 IFP performance series rear shocks. Other components include high strength crossmembers, steering knuckles, tie rod ends, diff drop brackets, skid plates, sway bar relocation, brake line relocation, and rear block kit for clearance of up to 37" tires. **TB/AT4 models net 2.5" or 4" lift although ride height similar to 4" or 6" standard kits.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR395X-1

BDS is now offering 3" UCA Lift Systems for the 2020 Chevy and GMC HD Trucks designed to improve performance, capability and clearance with room for up to 35" tires. These new lift systems are deigned to build off the factory mounting points to offer maximum ground clearance and improve suspension travel. The kits include BDS performance upper control arms (UCAs) indexed torsion bar keys, differential relocation, sway bar relocation, rear block kit and FOX 2.0 IFP gas shocks for improved performance. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for peace of mind wherever your adventures may take you. Factory Protection Plus includes the no fine print warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty.

Product Description

3" UCA Lift System for 2020 Chevy/GMC HD Trucks

Vehicle Fitment

2020 Chevy Silverado 2500HD 2WD/4WD
2020 Chevy Silverado 3500HD 2WD/4WD SRW/DRW
2020 GMC Sierra 2500HD 2WD/4WD
2020 GMC Sierra 3500HD 2WD/4WD SRW/DRW
2020 GMC Sierra Denali 2500HD 2WD/4WD
2020 GMC Sierra Denali 3500HD 2WD/4WD SRW/DRW

Kit Listings

  • BDS760FS - 3" UCA Lift System w/ FOX 2.0 IFP Shocks (w/o Overloads)
  • BDS761FS - 3" UCA Lift System w/ FOX 2.0 IFP Shocks (w/ Overloads)

Kit Listings

  • BDS760FS - 3" UCA Lift System w/ FOX 2.0 IFP Shocks (w/o Overloads)
  • BDS761FS - 3" UCA Lift System w/ FOX 2.0 IFP Shocks (w/ Overloads)

Install Time/Difficulty

3-4 Hours / 3 of 5

Recommended Wheel/Tire Specs

35x12.50 Tires with 20x9 Wheels and 5.5"-5.75" BS
295/60 Tires with 20x9 Wheels and 5"-5.75" BS
285/65 Tires with 20x9 Wheels and 5"-6.18" BS
285/70 Tires with 18x9 Wheels and 5"-6.18" BS

*Stock wheels and stock tires can be installed, but are tight to the ball joint cup

Available Accessories

  • 55383 & 85430 - Single NX2 Steering Stabilizer Kit

Features/Benefits

  • High strength tubular UCAs, gusseted and fully welded. They are specially designed with an indexed ball joint cup to correct ball joint operating angle for more suspension travel.
  • Cast construction indexed torsion bar keys to provide additional ride height while maximizing ground clearance.
  • Front differential relocation brackets to correct CV axle operating angle.
  • 2" rear lift blocks and heavy duty u-bolts to level the stance.
  • FOX 2.0 performance series IFP shocks to improve performance.
  • Maintains ride and handling characteristics with clearance for 35" tires
  • Allows for improve offroad performance with more droop travel.

Important Notes

  • Disassembly/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool # is CH48809
  • Compatible with gas or diesel models
  • Compatible with AT4 models
  • Some minor trimming may be necessary to fit certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks and typically consists of trimming the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/ narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet
  • Compatible with DRW models, use w/ overload rear box kit #011217
Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

Coldwater, MI: BDS offers improved performance in a new smaller lift height with 3" UCA Lift Systems for the 2020 Chevy and GMC 2500HD/3500HD trucks. Designed for simple bolt-on installation, these kits allow clearance for up to 35" tires. At the heart of this new system is a pair of heavy duty tubular upper control arms (UCAs) designed for improved strength and suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints to allow more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied up front to lift vehicle. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.0 performance series IFP shocks ready to soak up the terrain. Take your HD to the next level with BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR394X-1

BDS takes the late model Chevy/GMC 1500 Trucks to the next level with new 3.5" DSC coilover systems (nets 1.5" lift on Trail Boss/AT4 models). These new performance systems up the ante with FOX 2.5 DSC front coilovers and your choice of rear FOX 2.0 IFP or FOX 2.5 DSC shocks to take control of whatever terrain you throw at them. Kits are designed as a bolt in upgrade combined with a pair of BDS performance upper control arms and a small rear block kit. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-100,000 mile drivetrain warranty to match the dealer. Set your truck up right with BDS Suspension and FOX.

Product Description

3.5" DSC Coilover Systems ('19+ Chevy/GMC 1500 Trucks)
1.5" DSC Coilover Systems  ('19+ Chevy Trail Boss / GMC AT4 Trucks)

Vehicle Fitment

2019-2020 Chevy Silverado 1500 4WD (3.5" Lift)
2019-2020 GMC Sierra 1500 4WD (3.5" Lift)
2019-2020 Chevy Silverado 1500 Trail Boss 4WD (1.5" Lift)
2019-2020 GMC Sierra 1500 AT4 4WD (1.5" Lift)
*will not fit Denali models with ARC

Kit Listings

  • BDS772FDSC - 3.5" DSC Coilover System (rear FOX 2.0 IFP Shocks)
  • BDS755FDSC - 3.5" DSC Coilover System (rear FOX 2.5 DSC Shocks)
  • BDS773FDSC - 1.5" DSC Coilover System (rear FOX 2.0 IFP Shocks)
  • BDS774FDSC - 1.5" DSC Coilover System (rear FOX 2.5 DSC Shocks)

*772FDSC/773DSC and 755FDSC/774FDSC are similar kits, lift height net will be based on factory ride height

Important Notes

  • 5.5” max wheel backspacing can be used
  • Will not fit Denali models with ARC
  • Will fit Trail Boss/AT4 models however will net 1.5” of lift over factory ride height

Attn State of California consumers: Prop 65 Warning

Features/Benefits

  • Builds off factory suspension geometry for improved performance with easy install
  • Front FOX 2.5 DSC coilovers for inmatched performance and capability with simple adjustment of settings
  • Rear FOX 2.0 IFP shocks or FOX 2.5 DSC shocks for improved ride quality, performance and capability
  • BDS HD upper control arms for strength and increased suspension travel
  • Rear lift block kit to a level to slightly tail-high stance
  • Factory Protection Plus included

Install Time/Difficulty

4-5 Hours / 3 of 5

Recommended Wheel/Tire Specs

35x12.50 Tires on 20x9 Wheels with 5.5" BS (Chevy)
33x12.50 Tires on 20x9 Wheels with 5.5" BS (GMC)

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

Coldwater, MI: These 3.5" DSC Coilover Systems are designed to build on the stout factory front suspension design on the 2019+ Chevy/GMC 1500 trucks  (nets 1.5" lift on Trail Boss/AT4 models) and take performance to the next level. At the heart of these 3.5" systems are a pair of specially tuned FOX 2.5 factory race series DSC coilovers. These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory leaf springs are retained and 2” lift comes from a replacement set of lift blocks. Also supplied for the rear of these 3.5” lift kits are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series DSC adjustable shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-100,000 mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019-2020 Chevy/GMC 1500 truck with these new 3.5” coilover lift systems from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

Upgrade your 2020 Chevy/GMC HDs factory stamped steel arms to these performance upper control arms from BDS Suspension. Specially designed for leveled and lifted applications, these arms are built from high strength 1.5" OD x .120-wall steel tubing and feature an indexed ball joint cup to correct the ball joint positioning. These UCAs can be used with BDS 6.5" lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings. At the other end premium quality ball joints for smooth, quiet operation, and superior durability to arms that feature uniballs, poly bushings or heims. These upper control arms come finished in a durable semi-gloss black powder coat and include a billet aluminum machined ball joint dust cap. They integrate a mounting tab for the factory brake lines so there's no need to zip tie the lines as is the case with other kits on the market. The control arms come fully assembled for easy install right out of the box compatible with most leveling and lift kits on the market to increase wheel travel. Also included with the UCAs are a pair of optional weld-on steering stops plates (if necessary) and a wheel spacer to allow installation of the factory wheel in the event the OE wheel needs to be installed. Take your new Chevy/GMC HD to the next level with these performance upper control arms from BDS Suspension.

Product Description

BDS Performance Upper Control Arms for 2020 Chevy/GMC HD

Product Info

BDS121304 - Performance Upper Control Arm (UCA) Kit

Vehicle Fitment

2020 Chevrolet Silverado 2500 2WD/4WD Gas/Diesel
2020 Chevrolet Silverado 3500 2WD/4WD Gas/Diesel SRW/DRW
2020 GMC Sierra 2500 2WD/4WD Gas/Diesel
2020 GMC Sierra 3500 2WD/4WD Gas/Diesel SRW/DRW
2020 GMC Denali HD 2WD/4WD Gas/Diesel SRW/DRW

Important Notes

  • Stock wheels with stock tires can be installed, however clearance are very tight to the upper control arms.
  • Not recommended for 5" lift kits
  • Attn State of California consumers: Prop 65 Warning

Features/Benefits

  • High strength 1.5" tubular construction improves strength and durability over stock arms.
  • Indexed ball joint cup allows for increased travel on leveled/lifted applications.
  • Factory style rubber bushings for long lasting, maintenance-free operation.
  • High quality greasable ball joints and a protective cap to keep out debris.
  • Fully assembled and ready to install right out of the box.

Install Time/Difficulty

1-2 Hours / 2 of 5

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension introduces new 4” and 6" high clearance coilover systems for the 2019-2020 Chevy/GMC 1500 trucks. These systems join the existing 4” and 6" lift options as an intermediary between the standard kits and full blown FOX 2.5 R/R coilover systems by utilizing FOX 2.0 performance series IFP (non-reservoir) coilovers and 2.0 PS IFP rear shocks. These new suspension systems utilize the tried and true high-clearance IFS design that has made BDS the preferred suspension lift for late model GMs updated to correct suspension, steering and driveline geometry for improved on road comfort and off-road performance and combine with FOX 2.0 coilovers and shocks for improved performance. As with all BDS suspension systems these new 4" and 6” coilover systems options are backed by Factory Protection Plus offering you peace of mind for your adventure. This includes a BDS No Fine Print Warranty, FMVSS No.126 compliance testing and a 5year-100,000mile drivetrain warranty. Build your Chevy/GMC up right with BDS Suspension.

Product Description

BDS 4 & 6" (2.0) Coilover Systems
for Chevy/GMC 1500 Trucks

Vehicle Fitment

2019-2020 Chevy Silverado 1500 4WD
2019-2020 Chevy Silverado 1500 Trail Boss 4WD
2019-2020 GMC Sierra 1500 4WD
2019-2020 GMC Sierra 1500 AT4 4WD

Product Info

#BDS748FSR - 4" 2.0 Coilover System
#BS746FSR -
6" 2.0 Coilover System

Available Accessories

#121253 - Performance UCA Kit (6" kits only)
#121409/123409 - Recoil Traction Bars

Recommended Wheel/Tire Specs

4" C/O Systems:
35x12.50 tires with 20x9 wheels and 5.5-6.25" BS (Chevy)
33x12.50 tires with 20x9 wheels and 4.5-6.25' BS (Chevy)
33x12.50 tires with 20x9 wheels and 5.5-6.25" BS (GMC)

6" C/O Systems:
37x12.50 tires with 20x9 wheels and 5.5-6.25" BS (Chevy)
35x12.50 tires with 20x9 wheels and 4.5-6.25" BS (Chevy)
35x12.50 tires with 20x9 wheels and 5.5-6.25" BS (GMC)

Install Time / Difficulty

8 hours / 4 of 5

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Features/Benefits

  • High clearance crossmember design maximiazes ground clearance
  • Robust steering knuckles maintain ESC system compliance
  • FOX 2.0 performance series IFP coilovers and shocks improve ride quality, performance and capability
  • HD skid plate system improved offroad protection
  • Multipoint differential relocation brackets to secure front axle and improve CV angles
  • Factory Protection Plus included
  • Allows clearance for 35-37" tires

Important Notes

  • Does NOT fit diesel models
  • Requires frame bracket modification
  • Will not fit models with Adaptive Ride Control (AC) system
  • Factory 17-18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
  • 17" wheels with 4.5" backspacing should be test fit prior to mounting tire to ensure proper clearance to the steering knuckle/tie rod ends
  • (4" C/O kits) Can be used on Trail Boss/AT4 models, however will only net 2-2.5" of lift
  • (6" C/O kits) Can be used on Trail Boss/AT4 models, however will only net 4" of lift

*Attn State of California consumers: Prop 65 Warning

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • FMVSS No.126 ESC System compliance
  • BDS’s exclusive No Fine Print Warranty
FMVV No.126 Compliant

Coldwater, MI: BDS Suspension adds new options for the 4" and 6"  high clearance systems for the 2019-2020 Chevy/GMC 1500 trucks. These new coilover systems join the current lineup offering improved performance and capability. These kits are based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, these systems have been designed from the ground up to get the more out of your truck with the most ground clearance on the market. This new 6" lift system is the first of many new BDS options to come available for the new trucks bringing you on road comfort, off-road capability and clearance for 35" tires. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality. Case in point the (NHTSA) National Highway Traffic Safety Administration's FMVSS No.126 compliance standards requiring any aftermarket modification to not adversely effect the vehicle's electronic stability control (ESC) system performance in the event of an evasive maneuver.

These systems join the exising 6” lift options as an intermediary between the standard (strut spacer) kits and full blown FOX 2.5 R/R coilover systems by utilizing FOX 2.0 performance series IFP (non-reservoir) coilovers and 2.0 PS IFP rear shocks. These new suspension systems utilize the tried and true high-clearance IFS design that has made BDS the preferred suspension lift for late model GMs updated to correct suspension, steering and driveline geometry for improved on road comfort and off-road performance and combine with FOX 2.0 coilovers and shocks for improved performance. As with all BDS suspension systems these new 6” coilover systems options are backed by Factory Protection Plus offering you peace of mind for your adventure. This includes a BDS No Fine Print Warranty, FMVSS No.126 compliance testing and a 5year-100,000mile drivetrain warranty. Build your Chevy/GMC up right with BDS Suspension.

At the heart of these new systems are a pair of precision tuned FOX 2.0 performance series (non-reservoir) coilover struts designed for use with the factory coil spring and top plate. These non-reservoir FOX coilovers offer improved on-road and off-road performance and allow easy setup with 2 snap ring grooves for either 4" or 6" of lift. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX’s proprietary internals, 5/8" hard chrome plated heat treated alloy shaft. Complimenting the coilovers, BDS utilizes a pair of specially designed 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of these lift systems, the factory block is replaced with either a 3" or 5" lift block and longer u-bolts to lift and level the stance depending on front lift height. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Specially tuned FOX 2.0 IFP performance series gas shocks are supplied to round out the rear of these kits. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, FMVSS No.126 (ESC System) compliance certification and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019-2020 Chevy/GMC 1500 truck with either of these new 4" and 6" coilover systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com