BDS Suspension has updated current listings for the 2022 RAM 3500 model year trucks. This includes the 2", 3", 4", 6", and 8" lift systems, these lift options improve the look, performance, and capability of your late model RAM 3500 with clearance for up to 40" tires. Kits carry over from 2019-2021 fitments and have been confirmed compatible with the 2022 RAM 3500 platform. As with all BDS kits, these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP are BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2019-2022 RAM 3500 with BDS Suspension.

Product Description

2-8" Lift Systems for RAM 3500 4WD

Vehicle Fitment

2019-2022 RAM 3500 4WD

*** Check the BDS website or verify details prior to ordering parts to ensure information is up to date with current manufacturing offerings

Available Accessories

#85427 - NX2 Single Steering Stabilizer
#98224018 - FOX 2.0 Single Steering Stabilizer
#55382/85422 - NX2 Dual Stabilizer Kit
#55382/98224016 - FOX 2.0 Dual Stabilizer Kit
#122324 - HD Adjustable Front Track Bar
#102003 - Extended SS Front Brake Lines Pr.
#122406 - Carrier Bearing Drop (2-pc rear driveshafts)

Rec'd Tire/Wheel

2" Kits - 35x12.50 Tires on 17x9 Wheels (5" BS)
3" Kits - 35x12.50 Tires on 17x9 Wheels (4.5-5" BS)
4" Kits - 37x12.50 Tires on 17x9 Wheels (5" BS)
6" Kits - 37x13.50 Tires on 17x9 Wheels (4.5-5" BS)
8" Kits - 40x13.50 Tires on 17x9 Wheels (4.5-5" BS)

*Additional sizes can be used, see individual product pages for recommendations

Kit Info

Diesel Trucks (non-AirRide)
#694H/FS - 2" Leveling Kit
#1654H/FS - 3" Radius Arm Lift Kit
#1656H/FS - 4" Radius Arm Lift Kit
#1666H/FS - 4" 4-Link Lift Kit
#1682H/FS - 6" Radius Arm Lift Kit
#1690H/FS - 6" 4-Link Lift Kit
#1728H/FS - 8" 4-Link Lift Kit

Gas Trucks (non-AirRide)
#694H/FS - 2" Leveling Kit
#1700H/FS - 4" Radius Arm Lift Kit
#1676H/FS - 4" 4-Link Lift Kit
#1686H/FS 5.5" Radius Arm Lift Kit
#1694H/FS - 5.5" 4-Link Lift Kit

Diesel Trucks (w/ AirRide)
#1710H/FS - 2" Leveling Kit
#1718H/FS - 4" Radius Arm Lift Kit
#1724H/FS - 6" Radius Arm Lift Kit
#1732H/FS - 6" 4-Link Lift Kit

Gas Trucks (w/ AirRide)
#1710H/FS - 2" Leveling Kit
#1722H/FS - 4" Radius Arm Lift Kit
#1723H/FS - 4" 4-Link Lift Kit
#1726H/FS - 5.5" Radius Arm Lift Kit
#1734H/FS - 5.5" 4-Link Lift Kit

2022 RAM 3500 Lift Kits

2" Leveling/Lift Kits: These kits are designed to take advantage of the RAM HDs stout factory suspension. Designed to raise the front 2" to level out the stance, this kit uses a pair of heavy-duty steel fabricated coil spacers allowing clearance for 35" tires to be installed. The spacers are pitched and indexed to work with the unique coil mount design of the late model RAM HD trucks and are secured to the coil bucket to maintain proper indexing when the coil springs are unloaded. With the additional ride height, the front bump stops are replaced with taller polyurethane units to control suspension compression. For airbag equipped models a 1" rear block kit is used to level the stance along with air bag spacer brackets. Rounding out these leveling kits is your choice of BDS NX2 gas series or FOX 2.0 IFP performance gas shocks at all four corners to improve ride quality.

3" Radius Arm Lift Kits: These 3" lift kits lift and level the stance with room for 35" tires. They use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high-strength adjustable track bar with a center pinch-bolt turnbuckle is supplied to re-center the front axle along with extended length sway bar links, and extended polyurethane bump stops. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks at all 4 corners for improved ride and performance. In the rear of the 3500 kits is a block and u-bolt kit to level out the stance and maintain load capacity.

4-6" Radius Arm Lift Kits: These 4"/6" (diesel) and 4"/5.5" (gas) lift kits options are designed to lift and level the stance with clearance for up to 37" tires. They use a pair of full-length progressive rate coil springs to provide extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4"+ of lift it is critical to correct the front driveline angle to maintain the use of the 4WD. To do this BDS Suspension provides a heavy-duty replacement transmission crossmember to allow clearance for the front driveline once indexed using the supplied transfer case indexing ring. In the rear of the RAM 3500 kits is a block and u-bolt kit to level out the stance and maintain load capacity. AirRide equipped models will use a rear air-bag spacer to retain the full functionality of the air bag system.

4-6" 4-Link Lift Kits - These systems use a pair of progressive rate coil springs (4"/5.5" gas) or (4"/6" diesel) to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4"+ of lift it is critical to correct the front driveline angle to maintain the use of the 4WD. To do this BDS Suspension provides a heavy-duty replacement transmission crossmember to allow clearance for the front driveline once indexed using the supplied transfer case indexing ring. In the rear of the RAM 3500 kits is a block and u-bolt kit to level out the stance and maintain load capacity. AirRide equipped models will use a rear air-bag spacer to retain the full functionality of the air bag system

8" 4-Link Lift System: Designed for clearance of 38-40" tires, these 8" 4-link systems offer the stance and performance customers demand. Up front, these systems use a pair of 8" diesel-specific progressive rate coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height, the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 Performance Series IFP gas shocks for improved ride and performance.

At 8” of lift it is critical to make front driveline adjustments to maintain the use of 4WD due to the increased operating angle. To do this, BDS Suspension provides a heavy-duty replacement transmission cross member as well as a transfer case indexing ring to reposition the front driveline output which will need to be used in combination with an aftermarket front driveshaft (not included with the kit). In the rear, a dual add-a-leaf kit is used in combination with lift blocks and longer u-bolts to lift and level the stance. Rounding out the rear of this kit is your choice of NX2 series or Fox 2.0 Performance Series gas shocks.


As with all BDS Suspension kits, these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and a 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new BDS lift kits for 2022 RAM 3500 4WD trucks.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Suspension has updated current listings for the 2022 RAM 2500 model year trucks. This includes the 2", 3", 4", 6", and 8" lift systems, these lift options improve the look, performance, and capability of your late model RAM 2500 with clearance for up to 40" tires. Kits carry over from 2019-2021 fitments and have been confirmed compatible with the 2022 RAM 2500 platform. As with all BDS kits, these include Factory Protection Plus (FPP) for peace of mind wherever your adventures may go. Included in FPP are BDS's No Fine Print Warranty, FMVSS No.126 ESC System compliance testing, and a 5-year, 100,000-mile supplemental drivetrain warranty. Improve the performance, capability, and curb appeal of your new 2019-2022 RAM 2500 with BDS Suspension.

Product Description

2-8" Lift Systems for RAM 2500 4WD

Vehicle Fitment

2019-2022 RAM 2500 4WD

*** Check the BDS website or verify details prior to ordering parts to ensure information is up to date with current manufacturing offerings

Available Accessories

#85427 - NX2 Single Steering Stabilizer
#98224018 - FOX 2.0 Single Steering Stabilizer
#55382/85422 - NX2 Dual Stabilizer Kit
#55382/98224016 - FOX 2.0 Dual Stabilizer Kit
#122324 - HD Adjustable Front Track Bar
#122609 - HD Adjustable Rear Track Bar
#102003 - Extended SS Front Brake Lines Pr.
#122406 - Carrier Bearing Drop (2-pc rear driveshafts)

Rec'd Tire/Wheel

2" Kits - 35x12.50 Tires on 17x9 Wheels (5" BS)
3" Kits - 35x12.50 Tires on 17x9 Wheels (4.5-5" BS)
4" Kits - 37x12.50 Tires on 17x9 Wheels (5" BS)
6" Kits - 37x13.50 Tires on 17x9 Wheels (4.5-5" BS)
8" Kits - 40x13.50 Tires on 17x9 Wheels (4.5-5" BS)

*Additional sizes can be used, see individual product pages for recommendations

Kit Info

Diesel Trucks (non-AirRide)
#695H/FS - 2" Leveling Kit
#1653H/FS - 3" Radius Arm Lift Kit
#1660H/FS - 4" Radius Arm Lift Kit
#1674H/FS - 4" 4-Link Lift Kit
#1680H/FS - 6" Radius Arm Lift Kit
#1688H/FS - 6" 4-Link Lift Kit
#1727H/FS - 8" 4-Link Lift Kit

Gas Trucks (non-AirRide)
#695H/FS - 2" Leveling Kit
#1699H/FS - 4" Radius Arm Lift Kit
#1675H/FS - 4" 4-Link Lift Kit
#1681H/FS 5.5" Radius Arm Lift Kit
#1689H/FS - 5.5" 4-Link Lift Kit

Diesel Trucks (w/ AirRide)
#1635H/FS - 2" Leveling Kit
#1713H/FS - 3" Radius Arm Lift Kit
#1714H/FS - 4" Radius Arm Lift Kit
#1715H/FS - 4" 4-Link Lift Kit
#1736H/FS - 6" Radius Arm Lift Kit
#1738H/FS - 6" 4-Link Lift Kit

Gas Trucks (w/ AirRide)
#1635H/FS - 2" Leveling Kit
#1716H/FS - 4" Radius Arm Lift Kit
#1717H/FS - 4" 4-Link Lift Kit
#1737H/FS 5.5" Radius Arm Lift Kit
#1739H/FS - 5.5" 4-Link Lift Kit



2022 RAM 2500 Lift Kits

2" Leveling Kits: These kits are designed to take advantage of the RAM HDs stout factory suspension. Designed to raise the front 2" to level out the stance, this kit uses a pair of heavy-duty steel fabricated coil spacers allowing clearance for 35" tires to be installed. The spacers are pitched and indexed to work with the unique coil mount design of the late model RAM HD trucks and are secured to the coil bucket to maintain proper indexing when the coil springs are unloaded. With the additional ride height, the front bump stops are replaced with taller polyurethane units to control suspension compression. Rounding out these leveling kits is your choice of BDS NX2 gas series or FOX 2.0 IFP performance gas shocks at all four corners to improve ride quality. Rear ride height sensor brackets will be included with AirRide equipped models.

3" Radius Arm Lift Kits: These 3" lift kits lift and level the stance with room for 35" tires. They use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high-strength adjustable track bar with a center pinch-bolt turnbuckle is supplied to re-center the front axle along with extended length sway bar links, and extended polyurethane bump stops. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance. In the rear of the 2500 kits are 1.25" steel fabricated coil spacers to level out the stance and maintain load capacity along with extended length sway bar links, rear bump stop extensions, a rear track bar, and your choice of gas shocks. AirRide equipped models will include rear ride height sensor brackets.

4-6" Radius Arm Lift Kits: These 4"/6" (diesel) and 4"/5.5" (gas) lift kits options are designed to lift and level the stance with clearance for up to 37" tires. They use a pair of full-length progressive rate coil springs to provide extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4"+ of lift it is critical to correct the front driveline angle to maintain the use of the 4WD. To do this BDS Suspension provides a heavy-duty replacement transmission crossmember to allow clearance for the front driveline once indexed using the supplied transfer case indexing ring. In the rear of the RAM 2500 kits replacement progressive rate coil springs are used along with extended length sway bar links, rear bump stop extensions, a rear track bar, and your choice of gas shocks. AirRide equipped models will use a rear air-bag spacer and rear ride height sensor brackets to retain the full functionality of the air suspension.

4-6" 4-Link Lift Kits - These systems use a pair of progressive rate coil springs (4"/5.5" gas) or (4"/6" diesel) to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4”+ of lift it is critical to correct the front driveline angle to maintain the use of the 4WD. To do this BDS Suspension provides a heavy-duty replacement transmission cross member as well as a transfer case indexing ring to reposition the front driveline output to allow the use of the factory drivelines. In the rear of the RAM 2500 kits, progressive rate coil springs are supplied to level out the stance and improve capability across all terrains without affecting load capacity. Extended rear sway bar end links and new bump stops are included to compensate for the lift along with a track bar bracket to re-center the rear axle. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. AirRide equipped models use a rear air-bag spacer and rear ride height sensor brackets to retain the full functionality of air suspension.

8" 4-Link Lift System: Designed for clearance of 38-40" tires, these 8" 4-link systems offer the stance and performance customers demand. Up front, these systems use a pair of 8" diesel specific progressive rate coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height, the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 Performance Series IFP gas shocks for improved ride and performance.

At 8” of lift it is critical to make front driveline adjustments to maintain the use of 4WD due to the increased operating angle. To do this, BDS Suspension provides a heavy-duty replacement transmission cross member as well as a transfer case indexing ring to reposition the front driveline output which will need to be used in combination with an aftermarket front driveshaft (not included with the kit). In the rear, careful consideration was taken to design the system for load carrying capacity, handling, and ride quality. The factory coil positioning inside the frame rails is sufficient at smaller heights, but at 8" of lift needed to be modified to increase stability. The rear springs have been outboarded by 8" per side (16" total) using a set of bolt-on mounts. The new upper and lower coil seats locate off of existing features on the frame and axle, requiring only minor drilling for mounting hardware. The new position allows for a much shorter and more stable coil spring design. This virtually eliminates any chance of coil bowing and ensures the coils react predictably throughout the full range of travel. In addition to the coil springs/mounts, a new track bar relocation system is included to properly set the rear roll-center height and center the axle under the vehicle. The rear track bar relocation includes a new heavy-duty adjustable track bar. The track bar uses high-durometer polyurethane bushings at the frame and an adjustable forged COM bearing joint at the axle. Extended rear sway bar links round out the rear suspension components. Rounding out the rear of this kit is your choice of NX2 series or Fox 2.0 Performance Series gas shocks.


As with all BDS Suspension kits, these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and a 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new BDS lift kits for 2022 RAM 2500 4WD trucks.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

2019+ RAM

BDS Suspension is now shipping complete 5.5-6" lift systems for the 2019+ RAM 3500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms or 4-link conversion, front progressive rate coil springs, your choice of gas shocks, steering correction and more allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 5.5-6" lift systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

5.5-6" Radius Arm Systems
5.5-6" 4-Link Systems

Vehicle Fitment

2019-2021 RAM 3500 4WD
w/ Rear Air

Rec'd Max Wheel/Tire Specs

37x12.50 Tires on 17x9/20x9 Wheels (5.625" BS)
35x12.50 Tires on 17x9/20x9 Wheels (4.5" BS)

Factory Protection Plus
  • 5-year, 100K-mile Drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

*** Prior to ordering, verify listings with BDS sales team to ensure listings are up to date

Kit Info

Diesel
#1724H/FS - 6" Radius Arm System (6-bolt t-case)
#1725H/FS - 6" Radius Arm System (8-bolt t-case)
#1732H/FS - 6" 4-Link System (6-bolt t-case)
#1733H/FS - 6" 4-Link System (8-bolt t-case)

Gas
#1726H/FS - 5.5" Radius Arm System
#1734H/FS - 5.5" 4-Link System

Kit Features

  • Heavy duty tubular radius arms or 4-link conversion for improved strength, clearance and correct caster
  • F/R high strength progressive rate coil springs for a great ride on any terrain
  • F/R HD track bar relocation brackets to correctly position both axles
  • Forged drop pitman arm to correct steering angles
  • F/R sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for up to 37" tires

Accessories

#85427 - NX2 Single Steering Stabilizer Kit
#98224018 - FOX Single Steering Stabilizer Kit
#55382/#85422 x2 - NX2 Dual Steering Stabilizer Kit
#55382/#98224016 x2 - FOX Dual Steering Stabilizer Kit
#122324 - HD Adjustable Front Track Bar
#122609 - HD Adjustable Rear Track Bar
#122406 - Carrier Bearing Drop Ki

Coldwater, MI: BDS Suspension expands its listings for the 2019+ RAM HDs with new 5.5-6" radius arm and 4-link systems for the rear air-ride equipped RAM 3500. Based on the popular BDS lift kits for the standard RAM HDs, these kit variants retain full functionality of the factory rear air-ride and on-road comfort while improving offroad capability.

[Radius Arm Kits] Up front, these systems use a pair of progressive rate 5.5-6" coil springs (5.5" gas, 6" diesel) to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms are supplied to bolt in place of the factory arms. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 6" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy-duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, a 5" lift block and u-bolts are supplied to lift and level the stance along with heavy duty airbag spacer brackets. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

[4-Link Kits] Up front these systems use a pair of progressive rate 5.5-6" coil springs (5.5" gas, 6" diesel) to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 6" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, a 5" lift block and u-bolts are supplied to lift and level the stance along with a heavy duty air bag spacer brackets. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get your 2019+ RAM looking and riding the way you want with these new 5.5-6" lift systems from BDS Suspension.

MEDIA GALLERY

5.5-6" Radius Arm System

5.5-6" 4-Link System

6" Lift Kit | 37x12.50 | 20x9.5

6" Lift Kit | 37x12.50 | 20x9.5

6" Lift Kit | 37x12.50 | 20x9.5

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

1736H-1739H-1

BDS Suspension is now shipping complete 5.5-6" lift systems for the 2019+ RAM 2500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms or 4-link conversion, front and rear progressive rate coil springs, your choice of gas shocks, steering correction and more allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 5.5-6" lift systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

5.5-6" Radius Arm Systems
5.5-6" 4-Link Systems

Vehicle Fitment

2019-2021 RAM 2500 4WD w/ Rear Air
*Gas & Diesel

Rec'd Max Wheel/Tire Specs

37x12.50 Tires on 17x9/20x9 Wheels (5.625" BS)
35x12.50 Tires on 17x9/20x9 Wheels (4.5" BS)

Factory Protection Plus
  • 5-year, 100K-mile Drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

*** Prior to ordering, verify listings with BDS sales team to ensure listings are up to date

Kit Info

Diesel
#1736H/FS - 6" Radius Arm System
#1738H/FS - 6" 4-Link System

Gas
#1737H/FS - 5.5" Radius Arm System
#1739H/FS - 5.5" 4-Link System

Kit Features

  • Heavy duty tubular radius arms or 4-link conversion for improved strength, clearance and correct caster
  • F/R high strength progressive rate coil springs for a great ride on any terrain
  • F/R HD track bar relocation brackets to correctly position both axles
  • Forged drop pitman arm to correct steering angles
  • F/R sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for up to 37" tires

Accessories

#85427 - NX2 Single Steering Stabilizer Kit
#98224018 - FOX Single Steering Stabilizer Kit
#55382/#85422 - NX2 Dual Steering Stabilizer Kit
#55382/#98224016 - FOX Dual Steering Stabilizer Kit
#122324 - HD Adjustable Front Track Bar
#122609 - HD Adjustable Rear Track Bar
#122406 - Carrier Bearing Drop Ki

Coldwater, MI: BDS Suspension expands its listings for the late model RAM HDs with new 5.5-6" radius arm and 4-link systems for the rear air-ride equipped RAM 2500. Based on the popular BDS lift kits for the standard RAM HDs, these kit variants retain full functionality of the factory rear air-ride and on-road comfort while improving offroad capability.

[Radius Arm Kits] Up front these systems use a pair of progressive rate 5.5-6" coil springs (5.5" gas, 6" diesel) to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms are supplied to bolt in place of the factory arms. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 5.5-6" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, heavy duty air bag spacer brackets are used to level the stance along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

[4-Link Kits] Up front these systems use a pair of progressive rate 5.5-6" coil springs (5.5" gas, 6" diesel) to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 5.5-6" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, heavy duty air bag spacer brackets are used to level the stance along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 5.5-6" lift systems from BDS Suspension.

MEDIA GALLERY

5.5-6" Radius Arm System

5.5-6" 4-Link System

5.5-6" Radius Arm System

5.5-6" 4-Link System

5.5-6" Radius Arm System

5.5-6" 4-Link System

5.5" Lift Kit | 37x13.50 | 22x12

5.5" Lift Kit | 37x13.50 | 22x12

5.5" Lift Kit | 37x13.50 | 22x12

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR428-1

BDS Suspension is now shipping complete 4" radius arm systems for the rear air-bag equipped 2019-2021 RAM 3500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms or 4-link conversion, front progressive rate coil springs, your choice of gas shocks, steering correction rear air-bag spacer and sensor correction allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 4" lift systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

PR428-2

Product Description

4" Radius Arm Systems
4" 4-Link Systems

Vehicle Fitment

2019-2021 RAM 3500 4WD SRW w/ Rear Air
2019-2021 RAM 3500 4WD DRW w/ Rear Air
*Gas & Diesel

Rec'd Max Wheel/Tire Specs

37x12.50 Tires on 17x9/18x9/20x9 Wheels (5.625" BS)
35x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5" BS)

Factory Protection Plus
  • 5-year, 100K-mile Drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Kit Info

Diesel
#1718H/FS - 4" Radius Arm System (6-Bolt Indexing)
#1719H/FS - 4" Radius Arm System (8-Bolt Indexing)
#1720H/FS - 4" 4-Link System (6-Bolt Indexing)
#1721H/FS - 4" 4-Link System (8-Bolt Indexing)

Gas
#1722H/FS - 4" Radius Arm System
#1723H/FS - 4" 4-Link System

Kit Features

  • Heavy duty tubular radius arms or 4-link conversion for improved strength, clearance and correct caster.
  • High strength progressive rate coil springs for a great ride on any terrain.
  • HD track bar relocation bracket to correctly position front axle.
  • Forged drop pitman arm to correct steering angles.
  • Sway bar correction to maintain handling performance.
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles.
  • Rear block kit to level stance with air bag spacer and sensor brackets.
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance.
  • Allows clearance for up to 37" tires.

Accessories

#85427 - NX2 Single Steering Stabilizer Kit
#98224018 - FOX Single Steering Stabilizer Kit
#55382/#85422 - NX2 Dual Steering Stabilizer Kit
#55382/#98224016 - FOX Dual Steering Stabilizer Kit
#122324 - HD Adjustable Front Track Bar
#122406 - Carrier Bearing Drop Kit
#122407/123409 - Recoil Traction Bar Kit

*** Prior to ordering, verify listings with BDS sales team to ensure listings are up to date ***

Coldwater, MI: BDS Suspension expands its listings for the late model RAM HDs with new 4" radius arm and 4-link systems for the rear air-bag equipped RAM 3500 4WD Trucks. Based on the popular BDS lift kits for the standard RAM HDs, these kit variants retain full functionality of the factory rear air-ride and on-road comfort while improving offroad capability.

[Radius Arm Kits] Up front these systems use a pair of progressive rate 4" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms are supplied to bolt in place of the factory arms. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, BDS supplies 3" lift blocks and u-bolts are supplied to lift and level the stance along with a heavy duty air bag spacer brackets. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

[4-Link Kits] Up front these systems use a pair of progressive rate 4" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, BDS supplies 3" lift blocks and u-bolts are supplied to lift and level the stance along with a heavy duty air bag spacer brackets. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 4" lift systems from BDS Suspension.

MEDIA GALLERY

4" Radius Arm System

4" 4-Link System

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR427-1

BDS Suspension is now shipping complete 4" radius arm systems for the 2019+ RAM 2500 4WD trucks. These kits have been engineered for improved on-road comfort and offroad capability. Kits include high strength tubular radius arms, front and rear progressive rate coil springs, your choice of gas shocks, steering correction and more allowing clearance for up to 37" tires. As with all BDS Suspension systems these new 4" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

4" Radius Arm Systems
4" 4-Link Systems

Vehicle Fitment

2019-2021 RAM 2500 4WD w/ Rear Air
*Gas & Diesel

Rec'd Max Wheel/Tire Specs

37x12.50 Tires on 17x9/18x9/20x9 Wheels (5.625" BS)
35x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5" BS)

Factory Protection Plus
  • 5-year, 100K-mile Drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

*** Prior to ordering, verify listings with BDS sales team to ensure listings are up to date

Kit Info

Diesel
#1714H/FS - 4" Radius Arm System
#1715H/FS - 4" 4-Link System

Gas
#1716H/FS - 4" Radius Arm System
#1717H/FS - 4" 4-Link System

Kit Features

  • Heavy duty tubular radius arms or 4-link conversion for improved strength, clearance and correct caster
  • F/R high strength progressive rate coil springs for a great ride on any terrain
  • F/R HD track bar relocation brackets to correctly position both axles
  • Forged drop pitman arm to correct steering angles
  • F/R sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for up to 37" tires

Accessories

#85427 - NX2 Single Steering Stabilizer Kit
#98224018 - FOX Single Steering Stabilizer Kit
#55382/#85422 - NX2 Dual Steering Stabilizer Kit
#55382/#98224016 - FOX Dual Steering Stabilizer Kit
#122324 - HD Adjustable Front Track Bar
#122609 - HD Adjustable Rear Track Bar
#122406 - Carrier Bearing Drop Ki

Coldwater, MI: BDS Suspension expands its listings for the late model RAM HDs with new 4" radius arm and 4-link systems for the rear air-ride equipped RAM 2500. Based on the popular BDS lift kits for the standard RAM HDs, these kit variants retain full functionality of the factory rear air-ride and on-road comfort while improving offroad capability.

[Radius Arm Kits] Up front these systems use a pair of progressive rate 4" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms are supplied to bolt in place of the factory arms. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, heavy duty air bag spacer brackets are used to level the stance along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

[4-Link Kits] Up front these systems use a pair of progressive rate 4" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height the factory stamped steel radius arms are converted over to 4-link using a pair of 1/4" steel brackets and high strength upper and lower control arms designed to limit caster control throughout suspension travel for more predictable handling characteristics. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, heavy duty air bag spacer brackets are used to level the stance along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 4" lift systems from BDS Suspension.

MEDIA GALLERY

4" Radius Arm System

4" 4-Link System

4" Radius Arm System

4" 4-Link System

4" Radius Arm System

4" 4-Link System

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com