Upgrade the weak factory control arms on your Jeep Wrangler JL or Gladiator JT with these new heavy duty replacements from BDS Suspension. Designed as a bolt-in replacement, BDS offers fixed length and adjustable length control arms ready to take any abuse you can throw at them. The fixed length arms are designed slightly longer than stock to be used with up to 5" of lift heights and feature OE-style rubber bushings at both ends for  long service-free operation under your Jeep along with added strength from the 1.75" OD x .250-wall tubular construction specially formed to maximize clearance.

Stepping up to the adjustable control arms BDS has also designed these as a bolt in replacement for up to 5" of lifts offering strength and adjustability to your stock or lifted Jeep JL/JT. These arms are built from the same thick-wall tubing and are specially formed to maximize tire clearance. At the axle end they utilize a OE-style rubber bushing for long service-free operation and better isolation of NVHs. At the frame mount they feature a large forged flex end for strength, durability and offroad articulation. The forged flex ends allow length adjustments to correctly positon the front axle and correct caster. They are capable of 15-degrees of misalignment in either direction for more flex out on the trail and are finished in a durable textured black powdercoat. As with all BDS products, these arms are backed by the No Fine Print Warranty so you can use it abuse it. Upgrade your JL or JT's control arms with BDS Suspension.

Product Description

HD Control Arm Upgrades for Jeep JL/JT

Vehicle Fitment

2018-2021 Jeep Wrangler JL (2Dr) - all trims
2018-2021 Jeep Wrangler JL (4Dr) - all trims
2020-2021 Jeep Gladiator JT - all trims


Heavy duty construction, formed to improve ground clearance.
Fully welded ends with factory-style rubber bushing and large forged flex end.
Designed for 0-5" lifts to correct axle positioning.
Compatible with most lift kits on the market.
Finished in durable textured black powder coat.
Fully assembled, ready to install.

Product Information:

Wrangler JL:
Front/Upper HD Control Arms (Adjustable) - 124344
Front/Lower HD Control Arms (Fixed) - 124342
Front/Lower HD Control Arms (Adjustable) - 124343
Rear/Upper HD Control Arms (Adjustable) - 124346
Rear/Lower HD Control Arms (Fixed) - 124466
Rear/Lower HD Control Arms (Adjustable) - 124467

Gladiator JT:
Front/Upper HD Control Arms (Adjustable) - 124344
Front/Lower HD Control Arms (Fixed) - 124342
Front/Lower HD Control Arms (Adjustable) - 124343
Rear-Upper HD Control Arms (Adjustable) - 124347
Rear-Lower HD Control Arms (Adjustable) - 124348

JL/JT Front UCA - (Adj)

JL Rear LCA - (Fixed)

JL/JT Front LCA - (Fixed)

JL Rear LCA - (Adj)

JL/JT Front LCA - (Adj)

JT Rear UCA - (Adj)

JL Rear UCA - (Adj)

JT Rear LCA - (Adj)


© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | |

Leave a reply

Your email address will not be published. Required fields are marked *