NEW PRODUCT AnouncementOctober 14, 2015 PR.221: 5.5″ IFS Lift Kits PART##722H PRODUCT5.5″ IFS Lift Kit APPLICATION2015-2016 Chevy Colorado 4wd 2015-2016 GMC Canyon 4wd *gas only (diesel not available to be test fit) MSRP$1894.41 (5500-shocks) SUPPORT FILES & LINKSView Colorado/Canyon Kits Online View Installation Instructions
|
BDS 5.5″ Lift Kits for 2016 Chevy Colorado/GMC Canyon TrucksThe engineers at BDS Suspension got their hands on the 2016 Chevy Colorado and GMC Canyon to confirm compatibility of the current BDS 5.5″ Lift Kit with the new trucks. This fitment is a carry over from the 2015 models that BDS released first to market IFS systems for earlier this year. While the kits have not been test fit on the soon to be released 2.8L Duramax equipped trucks, it has been approved for use on the gas model trucks an improves performance across any terrain and allows owners to install 33″ tires. As with all BDS lift kits this new 5.5″ system is backed by Factory Protection Plus (FPP) offering peace of mind whether you’re on the road or off the beaten path. FPP combines BDS’s No Fine Print Lifetime Warranty, FMVSS No.126 ESC system compliance, and a 5-year 60,000-mile drivetrain warranty at no additional cost to the consumer. Improve the stance and capability of your new 2016 Chevy Colorado or GMC Canyon with BDS Suspension. For more information on the kit see below, head online to BDS Suspension or call (517) 279-2135.
5.5″ Colorado/Canyon Lift Kits: The BDS 5.5” suspension system for the 2015-2016 Colorado/Canyon is designed around the tried-and-true steering knuckle and crossmember technology. Along with the rugged, high clearance design, this new system has passed the National Highway Traffic Safety Administration’s Federal Motor Vehicle Safety Standard (FMVSS) No.126 and has been independently certified to not adversely effect the vehicles factory installed electronic stability control system with the lift installed. That combined with BDS No Fine Print Warranty and a 5-year 60,000-mile drivetrain warranty gives you the peace of mind wherever and however you use and abuse your truck. This system uses a pair of heavy duty 1/4″ steel high clearance crossmembers to reposition the lower control arms and work in unison with the massive ductile cast iron extended steering knuckles to gain 5.5” of lift. The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects vital front end components for offroad use and ties the crossmembers together for a extremely rigid subframe. The front differential is relocated to keep CV axle angles at a minimum and function properly with the supplied transfer case indexing ring. This allows for the use of the factory front driveline once lifted. The factory front struts are reutilized with top mounted strut spacers to maintain ride quality and allow for quick installation without the need to disassemble the struts. Front bump stop extension and sway bar links are included as well as new heavy duty Moog tie rod ends to properly set alignment without trimming the inner tie rods. In the rear, a block/u-bolt kit sets the new ride height so it is level with the front. BDS offers both the 5500-series hydraulic or Fox 2.0 series gas shocks specifically tuned to maximize the Colorado/Canyon’s performance in any terrain. If you’re looking to be the first on your block with a lifted 2015 Colorado and want the most out of your truck, BDS has you covered with new 5.5″ IFS lift kits. For more info on the kit and to find a dealer near you head online to bds-suspension.com. *Additional options including Fox Factory Series 2.5″ Remote Coilovers are in development and will be available as an upgrade option in the future. **BDS 5.5″ IFS Kit can be combined with a body lift for additional tire clearance. Important Kit Notes: Max Tire/Wheel Recommendations: © BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036 |
!hey guys kit looks great! let us know when it’ll be ready for the colorado duramax
Hey Jordan, those kits will be available soon. We’re making updates to the kits so they’ll work on both gas and diesel trucks, main issue being the rear crossmember clearance to the Duramax oil pan drain. Once available we’ll send out an official product announcement. You can see more info on the diesel Colorado at https://blog.bds-suspension.com/?p=11159
Any chance that the 5.5 lift kit has been test fit on the Colorado diesel yet? If so is it compatible?
Hey Reid, we have test fit the kits on the new Diesel Colorado and while the majority of the kits crosses over, there are some updates that need to be made to allow the kit to fit both the diesel and gas trucks. We haven’t released the updated kits quite yet, but will have them available very soon. For more on the diesel Colorado install head to https://blog.bds-suspension.com/?p=11159
Is the kit available for the 2016 Chevy Colorado diesel yet
Not quite yet, we are in the process of updating our 722H/722F/722FDSC kits to be diesel/gas compatible. Once available we’ll send out an announcement.
I’m in process of buying Canyon Duramax! Could someone shoot me e-mail when kits are available! I definitely want a BDS lift!
can you use stock wheels with 5.5 lift on 2016 gmc canyon 4×4
Hi Eddie, we have a note about that on our product page at 722H, stock 17″ and 18″ wheels cannot be directly reinstalled with the lift to due a clearance issue. To reinstall them you would need to add wheel spacers to achieve the recommended 4.5″ backspacing.