PR277

Looking to give your new 2017 Super Duty that little extra boost for 35" tires? Be sure to replace your track bar frame mount to accommodate the extra lift to keep your front axle and suspension components centered. BDS Suspension is now offering a heavy duty replacement track bar drop bracket. The bracket bolts in place of the factory unit and corrects the track bar angle to keep it in phase with the steering linkage for optimal handling. The bracket is built from high strength 1/4" steel, fully welded and finished in a durable textured black powdercoat.  The bracket is built to accomodate 1-3" of lift using a slotted track bar mounting hole and offset cam locks.  These brackets come standard in the BDS 2" leveling kits (#1519H) and will work with most leveling and lift kits up to 3" over stock height. Get the factory track bar upgraded on your leveled 2017 Ford Super Duty with BDS Suspension.

Media Gallery

Track Bar Bracket - 2017 Ford F250F350 Super Duty

Product Description

Heavy Duty Replacement Track Bar Frame Bracket

Vehicle Fitment

2017 Ford F250 Super Duty 4WD
2017 Ford F350 Super Duty 4WD SRW/DRW

Product Info

#123301 - $152.99

Leveling Kit Features

  • Bolt-in replacement bracket for OE frame bracket
  • Compatible with most 1-3" lift kits
  • Offset cam locks allow the track bar recenter axle at a range of lift heights.
  • 1/4" steel construction, fully welded
  • Finished in durable textured black powder coat

 *** Check website or call BDS sales prior to ordering to ensure information is up to date with current manufacturer offerings ***

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

4 Comments on “BDS New Product Announcement #278: 2017 Super Duty 1-3″ Track Bar Bracket
  • Brad says:

    I am thinking about putting a level in my 2017 F350 6.2l gas. With the heavy duty track bar bracket installed is there any concern or complaints about bumpsteer due to the fact the pitman arm is not dropped into the same plain? Or is it not too serious of a drop to put it out of plain with he drag arm? Thanks

    Reply
    • Carter @ BDS Suspension says:

      Hey Brad, thanks for your interest in BDS. This track bar bracket for the 2017 Super Duty doesn’t drop the track bar angle much at all. Instead it moves the mounting point over and uses a slotted hole with offset cam washers to recenter the axle for 1-3″ of lift. It is designed to be used in combination with the stock linkage/pitman arm to keep the steering and track bar angles in phase

      Reply
  • Bulldog says:

    I have a 2017 F250 sd w/2″ front leveling kit on 35s and would like to purchase this product, are there any concerning updates for this product that i should be made aware of prior to purchasing. Such as needs for adjustable track bar or fitment with all original oem parts

    Reply
    • Carter @ BDS Suspension says:

      Hi Bulldog, thanks for your interest in BDS Suspension. We offer both this 1-3″ track bar bracket as well as a 0-4″ adjustable track bar to fit your ’17 Super Duty. Either option is a good setup to add strength and recenter the front axle under the truck with a leveling kit installed. More info on the track bar bracket is available above in this announcement, for more info on the adjustable track bar head to https://blog.bds-suspension.com/?p=15805

      Reply

Leave a reply

Your email address will not be published. Required fields are marked *