Building on last month’s release of 2” leveling system and accessories for the new 2019 Ford Ranger, BDS Suspension adds new 3.5” UCA Lift Systems engineered for superior ride, functionality and capability. These new 3.5” systems build off the factory suspension mounting points offering improved ground clearance and wheel travel while retaining the ride quality and allowing clearance for up to 33-34” tires to be installed. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 60,000-mile drivetrain warranty.
3.5" UCA Lift Systems for 2019 Ranger
2019 Ford Ranger 4WD
Rec'd Wheel/Tire Fitment:
285/70r17 Tires on OE 17” Wheels
285/65r18 Tires on OE 18” Wheels
275/65r18 Tires on 18x9 Wheels (6.125” BS)
285/55r20 Tires on 20x9 Wheels (6.125” BS)
*other sizes can be used, trimming may be necessary
#1545H - 3.5” System w/ NX2 shocks - $1186.13 msrp
#1545FS - 3.5” System w/ FOX shocks - $1337.03 msrp
- Combination strut/preload spacers to lift without overextending
- Performance UCAs for improved strength and droop travel
- Lifts and levels vehicle stance with room for 33-34” tires
- Differential relocation to correct CV operating angle
- Rear HD shackle kit improves travel and levels stance
- NX2 or FOX 2.0 rear gas shocks included
BDS Suspension adds new 3.5” UCA lift systems designed to take advantage of the stout factory front suspension design on the 2019 Ford Ranger. This new system builds off the factory mounting points and offers improved strength, ground clearance and suspension travel. The new ride height is the result of a combination top mounted steel fabricated strut spacer along with preload spacer for a total 3.5” of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axles and other front end components. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5” DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable Moog ball joints and Clevite rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5” systems is a small differential relocation to help further improve CV axle operating angle.
In the rear of these lift systems the factory leaf springs are retained and 1” lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8” steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5” lift kits are your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks for improved damper performance. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.
All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 3.5” UCA lift systems from BDS Suspension.