PR375-1

Product Description

2014-2018 Chevy/GMC 1500 Upper Control Arm Kit

Product Info

121152 - GM1500 Upper Control Arm Kit  - $772.62

Related Kits/Products

121151 - GM1500 UCA Kit (OE Cast Steel Arms)
714H - BDS 2" Lift Kit for GM1500 Trucks
710H/710F - BDS 6" Lift Kit for GM1500 Trucks
743H/743F - BDS 8" Lift Kits for GM1500 Trucks
167H - BDS 2" Kit for GM1500 SUVs
731H/731F - BDS 6" Lift Kit for GM1500 SUVs
737H - BDS 6" Lift Kit for GM1500 SUVs w/ AR

Vehicle Fitment

2014-2018 Chevy Silverado 1500 2WD/4WD
2015-2018 Chevy Tahoe 2WD/4WD
2015-2018 Chevy Suburban 2WD/4WD
2014-2018 GMC Sierra 1500 2WD/4WD
2015-2018 GMC Yukon 2WD/4WD
2015-2018 GMC Yukon XL 2WD/4WD
*(w/ OE stamped steel or aluminum arms)

Features/Benefits

  • High strength 1.5" tubular construction w/ gusseted ball joint housing
  • Indexed ball joint housing offers improved suspension travel on lifted/leveled applications
  • High quality greasable ball joints with a protective cap to keep out dirt/debris
  • OE style rubber bushings for durability and maintenance-free operation
  • Fully assembled, ready to bolt in right out of the box

Install Time/Difficulty

1-2 Hours / 2 of 5

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

Important Notes

  • Designed for vehicles with OE stamped steel or aluminum control arms. Will NOT fit vehicles with OE cast steel arms (use #121151).
  • Control arms are much larger than stock. Tire/wheel selection is critical to allow for proper clearance. Optional weld-on steering stops are for cast steel and stamped steel arms only to eliminate any possible contact between the tire and upper control arm (these steering stops cannot be used on aluminum arms).
  • Wheels (stock/leveled) – 4.5” Backspacing required to run 12.50 wide tires.  5” backspacing will work with 11.50 wide tire (285).
  • Wheels (BDS 4.5/6.5) – works with wheels listed on kit fitment.  May require use of supplied weld-on steering stops for some combinations
  • Will NOT fit Magneride equipped models.
  • The included wheel spacer is to be used in the event the factory spare tire needs to be installed, this is for temporary use only.
  • Will work with most leveling kits and 6" lift kits on the market.

*Attn State of California consumers: Prop 65 Warning

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension adds to its lineup of heavy duty upper control arms (UCA) with new kits available for the 2014-2018 Chevy/GMC 1500 model trucks equipped with stamped steel and aluminum control arms. These UCAs are designed for improved strength, great looks, and increased suspension travel out of your stock, leveled or lifted GM 1500 vehicle. These UCAs join the existing #121151 arms for 2007-2016 GM1500 applications with cast steel to offer full coverage for all 2014-2018 GM1500 models regardless of factory configuration.

These performance control arms are built from high strength 1.5" OD x .120-wall steel tubing and feature an indexed ball joint cup to correct the ball joint positioning for when used with leveling or full lift kits. The frame mounting ends feature durometer-specific rubber bushings. At the other end premium quality ball joints for smooth, quiet operation and superior durability to arms that feature uniballs, poly bushings or heims. These upper control arms come finished in a durable semi-gloss black powder coat and include a billet aluminum machined ball joint dust cap. They integrate a mounting tab for the factory brake lines so there's no need to zip tie the lines as is the case with other kits on the market. The control arms come fully assembled for easy install right out of the box compatible with most leveling and lift kits on the market to increase wheel travel. Also included with the UCAs are a pair of optional weld-on steering stops plates (if necessary) and a wheel spacer to allow installation of the factory wheel in the event the OE wheel needs to be installed. Take your Chevy/GMC 1500 to the next level with these performance upper control arms from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR353-a

Add strength and adjustability to your late model Jeep Wrangler JL and Jeep Gladiator JT with new adjustable front upper control arms from BDS Suspension. These upper control arms are built from high strength 1.5" OD x .120"-wall steel tubing and specially formed for additional tire clearance. They feature a forged flex end for strength, adjustability and offroad articulation. The flex ends allow length to be adjusted to correct caster at a wide range of lift heights and allows for up to 30-degrees of misalignment out on the trail. Ready to bolt-in right out of the box, these arms are finished in a durable textured black powdercoat, upgrade your JL/JT's control arms with BDS Suspension.

Product Name:

Front Adjustable Upper Control Arm Kit

Kit Info:

#124344 - Front Adj UCA Kit -$269.99

Vehicle Fitment:

2018-2020 Jeep Wrangler JL 2Dr/4Dr
2020 Jeep Gladiator JT

Kit Features:

- High strength 1.5" OD x .120"-wall steel construction.
- Forged flex ends add strength and articulation with 30-degrees of misalignment.
- Adjustable design allows for caster correction at a wide range of lift heights.
- Specially formed for additional tire clearance.
- Greasable flex joints offer quiet operation and can be easily serviced.
- Finished in durable textured black powdercoat.

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check website or verify details prior to ordering parts to ensure information is up to date with current listings ***

Wrnagler JL / Gladiator JT Upper Control Arms
Front Adjustable UCA
Front Adjustable UCA

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR337-header

Building on last month’s release of 2” leveling system and accessories for the new 2019 Ford Ranger, BDS Suspension adds new 3.5” UCA Lift Systems engineered for superior ride, functionality and capability. These new 3.5” systems build off the factory suspension mounting points offering improved ground clearance and wheel travel while retaining the ride quality and allowing clearance for up to 33-34” tires to be installed. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 60,000-mile drivetrain warranty.

Product Name

3.5" UCA Lift Systems for 2019 Ranger

Vehicle Fitment

2019 Ford Ranger 4WD

Rec'd Wheel/Tire Fitment:

285/70r17 Tires on OE 17” Wheels
285/65r18 Tires on OE 18” Wheels
275/65r18 Tires on 18x9 Wheels (6.125” BS)
285/55r20 Tires on 20x9 Wheels (6.125” BS)
*other sizes can be used, trimming may be necessary

Kit Info

#1545H - 3.5” System w/ NX2 shocks - $1186.13 msrp
#1545FS - 3.5” System w/ FOX shocks - $1337.03 msrp

Kit Features

- Combination strut/preload spacers to lift without overextending
- Performance UCAs for improved strength and droop travel
- Lifts and levels vehicle stance with room for 33-34” tires
- Differential relocation to correct CV operating angle
- Rear HD shackle kit improves travel and levels stance
- NX2 or FOX 2.0 rear gas shocks included

Available Accessories:

#98224880 - FOX 2.0 Rear Shocks

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

MEDIA GALLERY

2019 Ford Ranger 2" Leveling Kits
2019 Ford Ranger 2" Leveling Kits

Product Announcement

BDS Suspension adds new 3.5” UCA lift systems designed to take advantage of the stout factory front suspension design on the 2019 Ford Ranger. This new system builds off the factory mounting points and offers improved strength, ground clearance and  suspension travel. The new ride height is the result of a combination top mounted steel fabricated strut spacer along with preload spacer for a total 3.5” of front lift. The reason for the combination is to achieve the correct ride height without increasing the overall extended length of the strut assembly too the point of causing premature wear of the CV axles and other front end components. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5” DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable Moog ball joints and Clevite rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5” systems is a small differential relocation to help further improve CV axle operating angle.

In the rear of these lift systems the factory leaf springs are retained and 1” lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8” steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5” lift kits are your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks for improved damper performance. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-60mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 3.5” UCA lift systems from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR330

New from BDS Suspension, Performance Upper Control Arm (UCA) Kits for the 4Runner and FJ Cruiser. These new UCA Kits are designed for improved strength, great looks, and increased suspension travel under your lifted Toyota SUVs. Fully assembled and ready to install right out of the box these fully welded arms feature OE durometer bushings and high quality ball joint for superior durability.

Product Description

Performance Upper Control Arms for Toyota 4Runner & FJ Cruiser

Vehicle Fitment

2007-2014 Toyota FJ Cruiser 2/4WD
2010-2018 Toyota 4Runner 2/4WD

Kit Info

#128251 - Upper Control Arm (UCA) Kit - $735.79

Compatible Lift Kits

#809H - 3" Strut Spacer System - $487.60

Product Features

- 1.5” DOM tubular construction
- Indexed ball joint cup for more wheel travel
- Quiet operation, superior corrosion resistance
- Serviceable ball joint
- Fully assembled, ready to bolt in

Important Notes

- Ball joint cap must be removed for maintenance of ball joint. Remove cap to access grease zerk. Grease at regular maintenance intervals.

- UCAs are designed to work with 2-3” of lift, and are not recommended for stock height vehicles.

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

*** Check BDS website prior to ordering to confirm information is up-to-date with current product listings ***

BDS Suspension adds to its lineup of heavy duty upper control arms (UCA) with new kits available for the Toyota 4Runner and FJ Cruiser. These new UCAs are designed for improved strength, great looks, and increased suspension droop travel. They are built from high strength 1-1/2” DOM tubing, fully welded for strength and durability. They use an indexed ball joint cup to correct the ball joint positioning for when used with leveling or full lift kits. The frame mounting ends feature durometer-specific rubber bushings for long laster durability and reduced NVHs. At the other end they utilize an indexed ball joint cup with premium quality MOOG ball joints for smooth, quiet operation and superior corrosion resistance to arms that feature uniballs, poly bushings or heims. These control arms come finished in a durable semi-gloss black powder coat and include a billet aluminum machined ball joint dust cap that can be removed to easily service the greasable ball joints. They integrate a mounting tab for the factory ABS lines so there's no need to zip tie the lines as is the case with other kits on the market. The control arms come fully assembled for easy install right out of the box compatible with most leveling and lift kits on the market to increase wheel travel.

Get more from your 4Runner and FJ Cruiser with this Performance UCA Kit from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR311

Coldwater, MI: BDS Suspension adds to its lineup of heavy duty upper control arms (UCA) with new kits available for the 2006-2018 RAM 1500 model 4wd trucks. These new UCAs are designed for improved strength, great looks, and increased suspension travel out of your stock, leveled or lifted RAM 1500 vehicle.

The new performance control arms are built from high strength 1.5" OD x .120-wall tubing, gusseted for strength and durability. They use an indexed ball joint cup to correct the ball joint positioning for when used with leveling or full lift kits. The frame mounting ends feature durometer-specific rubber bushings. At the other end they use an indexed ball joint cup with and premium greaseable MOOG-brand ball joints for smooth, quiet operation and superior durability to arms that feature uniballs, poly bushings or heims. These control arms come finished in a durable semi-gloss black powder coat and include a billet aluminum machined ball joint dust cap. They integrate a mounting tab for the factory brake lines so there's no need to zip tie the lines as is the case with other kits on the market. The control arms come fully assembled for easy install right out of the box compatible with most leveling and lift kits on the market to increase wheel travel. Take your RAM 1500 to the next level with these performance upper control arms from BDS Suspension.

Kit Info

#122251 - $735.79 MSRP

Vehicle Fitment

2006-2018 Dodge/RAM 1500 4WD*
*excludes 1500 megacab

Product Description

BDS Performance Upper Control Arms
for Dodge Ram 1500 4WD Trucks

BDS Upper Control Arm Features

  • High strength tubular construction
  • Heavy duty MOOG ball joints
  • Clevite rubber frame bushings
  • Includes brake line mount & steering stops
  • Full assembled, ready to install

UCA Compatible With

  • FOX 2.5 Factory Series Coilovers (0-2")
  • BDS 6" IFS & C/O Systems
  • Most Other Leveling & Lift Kits

Important Notes

  • Designed to work as stock replacement for 0-3" lift kits as well as BDS 6" systems. Not recommended for BDS 4" systems due to ball joint angle at that ride height.
  • Aftermarket wheels with 5" BS will clear up to 12.50" wide tire.
  • Works with stock wheel-tire combo.
BDS Performance Upper Control Arms | Dodge / RAM 1500
BDS Performance Upper Control Arms | RAM 1500
BDS Performance Upper Control Arms | RAM 1500
BDS Performance Upper Control Arms | RAM 1500
BDS Performance Upper Control Arms | RAM 1500
BDS Performance Upper Control Arms | RAM 1500

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR308

Coldwater, MI: BDS Suspension adds to its lineup of heavy duty upper control arms (UCA) with new kits available for the 2007-2016 Chevy/GMC 1500 model trucks and SUVs. These new UCAs are designed for improved strength, great looks, and increased suspension travel out of your stock, leveled or lifted GM1500 vehicle. On 2014-2016 models these arms are only compatible with vehicles equipped with OE cast steel UCAs, if equipped with stamped steel or cast aluminum these control arms cannot be installed.

The new performance control arms are built from high strength 1.5" OD x .120-wall tubing, gusseted for strength and durability. They use an indexed ball joint cup to correct the ball joint positioning for when used with leveling or full lift kits. The frame mounting ends feature durometer-specific rubber bushings. At the other end they use an indexed ball joint cup with and premium MOOG-brand ball joints for smooth, quiet operation and superior durability to arms that feature uniballs, poly bushings or heims. These control arms come finished in a durable semi-gloss black powder coat and include a billet aluminum machined ball joint dust cap. They integrate a mounting tab for the factory brake lines so there's no need to zip tie the lines as is the case with other kits on the market. The control arms come fully assembled for easy install right out of the box compatible with most leveling and lift kits on the market to increase wheel travel. Also included with the UCAs are a pair of optional weld-on steering stops plates (if necessary) and a wheel spacer to allow installation of the factory wheel in the event the OE wheel needs to be installed. Take your Chevy/GMC 1500 to the next level with these performance upper control arms from BDS Suspension.

Product Description

BDS Performance Upper Control Arms

BDS Upper Control Arm Features

  • High strength tubular construction
  • Heavy duty MOOG ball joints
  • Clevite rubber frame bushings
  • Includes brake line mount & steering stops
  • Full assembled, ready to install

Kit Info

#121151 - $735.79 MSRP

Vehicle Fitment

2007-2016 Chevy Silverado 1500 2/4WD*
2007-2016 GMC Sierra 1500 2/4WD*
2007-2016 GMC Sierra Denali 1500 2/4WD*
2007-2016 Chevy Avalanche 1500 2/4WD*
2007-2016 Chevy Tahoe 1500 2/4WD*
2007-2016 Chevy Suburban 1500 2/4WD*
2007-2016 GMC Yukon 1500 2/4WD*
2007-2016 GMC Yukon XL 1500 2/4WD*
2007-2016 GMC Yukon Denali 1500 2/4WD*

*OE cast steel UCA only for '14-16 Truck / '15-16 SUV

UCA Compatible With

  • FOX 2.5 Factory Series Coilovers (0-2")
  • Stock and BDS 2" Leveling Kits
  • BDS 4"/6" IFS & C/O Systems
  • Most other lift and leveling kits

Important Notes

  • Only for use on vehicle with OE cast steel UCAs
  • Not compatible with 14+ models w/ alum/stamped steel UCAs
  • Rec'd Wheel Specs (Stock/Leveled): 4.5" BS required to fit 12.50"-wide tires. 5" BS allows fitment of 11.50"-wide tire
  • Rec'd Wheel Specs (BDS 4"/6" Lifts): Follow Lift Kit Recommendations (4.5-5.75" BS) - may require use of supplied weld-on steering stops for some wheel/tire combinations

BDS Performance Upper Control Arms | Chevy / GMC 1500

BDS Performance Upper Control Arms | Chevy / GMC 1500

BDS Performance Upper Control Arms | Chevy / GMC 1500

BDS Performance Upper Control Arms | Chevy / GMC 1500

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com