December 2, 2015

PR.227: RAM 2500 Rear Adjustable Track Bar




 RAM 2500 Rear Adjustable Track Bar


2014-2016 RAM 2500




View RAM 2500 Track Bar Online

Dodge Ram 2500 rear track bar
#122609 Adjustable Rear Track Bar
Click to View High-Res Images:
Kit-A, Kit-B, Kit-C

Dodge Ram Sway Bar Disconnect
#122609 Installed on RAM 2500
Click to View High-Res Images:
Installed-A, Installed-B, Installed-C

Rear Adjustable Track Bar System for RAM 2500 Trucks

BDS Suspension expands its product lineup for the 2014-2016 RAM 2500 trucks with a new adjustable rear track bar designed to dial in the rear axle positioning. This new track bar provides improved control of the rear axle by replacing the soft factory rubber bushings in the OE track bar to a thick wall-DOM link with high durometer polyurethane bushings at the frame and a forged COM bearing joint at the axle. Can be used with or without track bar relocation when needed for lift heights from 0-8″.

For more information on this new adjustable track bar see below, head online to BDS Suspension or call (517) 279-2135.


Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

#122609 Adjustable Rear Track Bar
While the engineers designed the new BDS 8″ 4-Link Systems for new RAM 2500 trucks, the need for a heavy duty replacement rear track bar became evident to recenter the rear axle and keep it under control in extreme conditions. As part of the rear track bar system the team designed a new rear track bar able to be used as both an OE replacement as well as to be integrated with track bar brackets. This track bar can be used with all BDS lift kits as well as most other kits on the market.

The new adjustable rear track bar uses a 1.75″ OD x .250″-wall DOM steel tube construction, fully welded with a greaseable from mounted end using high-durometer polyurethane bushings. At the axle mount, the track bar uses a steel forged end with fine 1″ threads for precision adjustments with a high load capacity COM bearing insert. The COM bearing uses an injection molded race for long lift and quiet operation. Its been precision machined for an exact fit to mimic the stock bushing allowing it to be used in the OE location as well as with aftermarket track bar relocation brackets. The track bar comes in a durable textured black powder coat finish and is ready for install right out of the box. Get your RAM’s rear under control with BDS Suspension.

Important Notes 
1) Must be used with an appropriate track bar relocation bracket for heights over 3″.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | |


2 Comments on “BDS New Product Announcement #227: RAM 2500 Adjustable Rear Track Bar

Leave a reply

Your email address will not be published. Required fields are marked *