BDS Suspension is now shipping 4" and 6" lift systems for the 2022 Ford F150 4WD trucks. These high clearance IFS systems are based around BDS's tried and true high clearance design for F150 specifically catered to the redesigned 2021+ Ford F150 platform. All 2021 model kits have been tested and verified compatible with 2022 models allowing clearance for up to 37" tires under the new F150. As with all BDS lift kits these new 4" and 6" lift system includes Factory Protection Plus for the ultimate extended warranty. Factory Protection Plus brings together BDS’s legendary No Fine Print Warranty, ESC system compliance and a 5year-60,000mile drivetrain warranty to match your Ford dealers offerings. Take your new F150 to the next level with BDS and FOX.

Vehicle Fitment

2021-2022 Ford F150 4WD
*non-Tremor, non-CCD, & non-diesel models

Install Time/Difficulty:

8-10 Hours / 4 of 5

Rec'd Wheel/Tire Specs:

4" Lift Systems:
35x12.50 tires with 20x9 wheels and 5.5" BS
35x12.50 tires with 18x9 wheels and 5" BS

6" Lift Systems:
37x12.50 tires with 20x9 wheels and 5.5" BS
35x12.50 tires with 18x9 wheels and 5" BS

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Product Information:

2" Kits:
Coming Soon...

4" Lift Systems:
1583H/FS - 4" Lift Systems
1583F/FDSC - 4" Coilover Lift Systems

6" Lift Systems:
1579H/FS - 6" Lift System
1579F/FDSC - 6" Coilover Lift Systems


  • High clearance crossmembers design maximizes ground clearance while offering additional offroad protection
  • Redesigned steering knuckles specific to the 2021 F150 to maintain ESC system compliance
  • Available with strut spacers or FOX 2.5 factory series R/R coilovers to improve ride quality, performance & offroad capability
  • Multipoint differential relocation brackets to secure front axle and improve CV angles
  • Rear lift is provided via a replacement lift block to level stance, to eliminate need to stack blocks
  • Kits includes Factory Protection Plus (No Fine Print Warranty, ESC System compatibility, 5yr-60k mile drivetrain warranty)
  • Kit allows clearance for 35-37" tires

Available Accessories:

123427+123409 - Recoil Traction Bar Kit
UCA Kit - Coming Soon

Coldwater, MI: BDS Suspension is now shipping lift options for the 2022 Ford F150 trucks allowing you to improve the capability and performance with with room for larger tires. These kits are a carryover from the 2021 Ford F150 model kits now approved for use on the 2022 models. Kits are offered with your choice of top mounted strut spacer to retain OE ride quality or upgrade to FOX 2.5 coilovers with remote reservoir (available with optional DSC adjustment). Both the 4" and 6" lift systems use a pair of specially designed 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of newly designed ductile iron replacement steering knuckles are supplied to accomodate the new OE sway bar mounting location while maintaining proper steering geometry for ESC system compatibility. The front differential is repositioned via multipoint relocation brackets to keep CV angles in check. A billet aluminum front driveshaft spacer is supplied along with longer hardware to allow the reinstallation of the factory driveshafts. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of these lift systems, the factory block is replaced with either a 3" or 5" lift block and longer u-bolts to lift and level the stance depending on front lift height. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Specially tuned NX2 twin-tube gas or FOX 2.0 IFP performance series monotube gas shocks are supplied to round out the rear of these kits. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compliance and a 5year-60,000mile drivetrain warranty to match the dealer. Improve the look and capability of your 2021-2022 Ford F150 with the 4" or 6" lift systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | |

2 Comments on “4-6″ Lift Systems | 2022 Ford F150 | NPR #440
  • Don Lovett says:

    Bad experience with Liftkits4less. was told that the 6″ coiler kit was in stock then I was told that the coil-overs where backordered. Next I was told that the DCS coil-overs where available and did I want to upgrade so I paid the difference. Then they returned the cost for the DCS coil-overs without any communication. Finally last week I got ahold of sales rep on their team and told me that they just received the coil-overs from fox and would be shipping out on Friday. Well today I got the 5 packages without the coil-overs and was sent 2″ rear blocks instead of the 4″ rear blocks that was ordered. Now I submitted another ticket to the company and their response to the ticket was that they would contact the manufacture. It is more frustrating that they have no phone number to contact directly and no response on their online chat.

    PS any help that you can provide would be much appreciated.

    Don Lovett

    • Carter @ BDS Suspension says:

      Hey Don,
      Sorry to hear you’ve had less than a stellar experience. Unfortunately some of the affects of COVID still remain with supply chain interruptions and material shortages. FOX is one that has struggled to source raw parts for their shocks/coilovers leading to longer delays. Being you purchased through LK4L they will be able to contact our customer service team directly with order number to get this resolved. We’d need to know the order number placed with us (not your order number with LK4L) to get the block kit swapped. Our customer service team can be reached at (517) 279-2135 or


Leave a reply

Your email address will not be published.