Coldwater, MI: BDS Suspension adds to its lineup of vehicle specific mounting kits for the RECOIL traction bar system with redesigned kits specifically for the 2020+ Chevy/GMC 2500HD/3500HD trucks designed for easy bolt-on installation. Designed to improved on/offroad performance so you can put the power to the ground, Recoils feature a full float and spring loaded design allowing them to perform well in multiple terrains where tradition traction bars would bind up the suspension.
Recoil Traction Bars
for '20+ Chevy/GMC HD Trucks
2020-2021 Chevy Silverado 2500HD/3500HD
2020-2021 GMC Sierra 2500HD/3500HD
2020-2021 GMC Sierra Denali 2500HD/3500HD
- Works on vehicles with 0-8" of lift
- SRW only at this time, have not been able to test fit on a DRW
2-3 Hours / 2 of 5
***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***
#121416 - Recoil Mounting Brackets (20+ GM HD)
#123409 - Recoil Traction Bar Box Kit
- Adjustable axle wrap control utilizing dual-stage resistance springs
- Full floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation.
- Does not adversely affect ride quality when springs - particularly when resistance springs are adjusted to still be active.
- Spring preload can be adjusted on the vehicle without disassembling the traction bar
- Adjustments can be made for optimum performance over a wide range of uses/terrain. (On Road - Unloaded, Towing/Hauling, Off-Road, Competition pulling)
- Traction bar ends are greaseable and rebuildable
- Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation.
Coldwater, MI: BDS Suspension adds to its lineup of vehicle specific mounting kits for the RECOIL traction bar system with redesigned kits specifically for the 2020+ Chevy/GMC 2500HD/3500HD trucks designed for easy bolt-on installation. This revolutionary spring loaded traction bar system allows Chevrolet/GMC truck owners the freedom to improve traction on a variety of terrains without limiting wheel travel. The traction bars use heavy wall construction with internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They use a full float design for bind-free performance and can be installed with a range of lift heights.
These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The mounting brackets are designed for easy bolt-on installation. The traction bars and mounting brackets use a durable gloss black powdercoat finish.
These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.