PR304

BDS Suspension adds to its lineup of vehicle specific mounting kits for the RECOIL traction bar system with redesigned kits specifically for the 2017 Ford F250/F350 Super Duty trucks able to fit the 3.5", 4", and 4.5" diameter rear axles. This revolutionary spring loaded traction bar system allows Ford truck owners the freedom to improve traction on a variety of terrains without limiting wheel travel. The traction bars use heavy wall construction with internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They use a full float design for bind free performance and can be installed with a range of lift heights. For more info see below or head to the BDS website.

Product Description

RECOIL Traction Bar System

Kit ID Number(s)

#123409 (RECOIL Traction Bars w/o mounts)
#123416  (Mounting Brackets - 3.5-4" Axle)
#123426 (Mounting Brackets - 4.5" Axle)

MSRP

$906.12 (#123416 + 123409)
$906.12 (#123426 + 123409)

Vehicle Fitment

2017+ Ford F250 Super Duty 2/4WD
2017+ Ford F350 Super Duty 2/4WD SRW
2017+ Ford F350 Super Duty 2/4WD DRW

Important Notes

  • Will not fit regular cab trucks.
  • Designed for F250/F350 trucks with 3.5", 4", and 4.5" diameter rear axles.
  • Will work with 0-6" of rear lift (up to 8" lift kits).

Disclaimer

Please check the BDS website to verify product details prior to ordering parts to ensure the information is up to date with current manufacturer listings 

RECOIL Traction Bars: BDS Suspension adds to its lineup of vehicle specific mounting solutions for revolutionary RECOIL traction bar setups with new mounting kits specifically designed for the 2017+ Ford F250 and F350 Super Duty trucks. These new mounting brackets expand on existing fitment listings to include trucks fitted with both the 3.5", 4", and 4.5" diameter rear axle assemblies. This new mounting kit supersedes the previously listed #123417 mounting kit to broaden fitment listings and allow bolt-on installation. At the frame hole are drilled to secure the bracket to the frame while at the axle the brackets are secured to the leaf spring u-bolts. With the brackets installed a set of the RECOIL traction bars can be bolted in place offering improved traction and the freedom to adjust the internal spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install over the factory u-bolt plates. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@sporttruckusainc.com

PR284

The newest addition to BDS Suspension's lineup of vehicle specific mounting kits for the RECOIL traction bars are Ford F150 trucks. Designed specifically for the 2004-2017 Ford F150 trucks, these revolutionary spring loaded traction bars allows Ford truck owners the freedom to improve traction on a variety of terrains without limiting wheel travel. The traction bars use heavy wall construction with internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They use a full float design for bind free performance and can be installed with a range of lift heights. For more info see below or head to the BDS Suspension website.

Product Description

RECOIL Traction Bars

MSRP

$873.58  (#123419 + 123409)

Kit ID Number(s)

#123419 (F150 Mounting Brackets)
#123409 (RECOIL Traction Bars)

Vehicle Fitment

2004-2017 Ford F150 4WD
2004-2017 Ford F150 2WD
 *fits all cab/bed configurations except reg cab/short bed

Important Notes

Designed for use with most lift kits.
Compatible with 0-6" of rear lift.
Will not fit regular cab / short bed trucks

Disclaimer

Please check the BDS website to verify product details prior to ordering parts to ensure the information is up to date with current manufacturer listings

Media Gallery

BDS Recoil Traction Bars for Ford F150
BDS Recoil Traction Bars for Ford F150
BDS Recoil Traction Bars for Ford F150

RECOIL Traction Bars: Last year BDS Suspension introduced the revolutionary spring loaded traction bar system, the RECOIL traction bar. This patent pending design was engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. BDS has expanded its lineup to now include specific mounting kits for the 2004-2017 Ford F150 trucks. These next generation traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install over the factory u-bolt plates. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR275

BDS Suspension adds to its lineup of vehicle specific mounting kits for the RECOIL traction bar system with new kits designed specifically for the 2017 Ford F250/F350 Super Duty trucks. This revolutionary spring loaded traction bar system allows Ford truck owners the freedom to improve traction on a variety of terrains without limiting wheel travel. The traction bars use heavy wall construction with internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They use a full float design for bind free performance and can be installed with a range of lift heights. For more info see below or head to the BDS website.

Product Description

RECOIL Traction Bar System

Kit ID Number(s)

#123417  ('17 F250/F350 Mounting Brkts)
#123409 (RECOIL Traction Bars)

MSRP

$920.80 (#123417 + 123409)

Vehicle Fitment

2017 Ford F250 Super Duty 2/4wd
2017 Ford F350 Super Duty 2/4wd

Important Notes

  • Will not fit regular cab trucks.
  • Ford offered 2 rear axle options, this kit fits trucks with the smaller 3-5/8" diameter axle tube.
  • Will work with 0-6" of rear lift.

Disclaimer

Please check the BDS website to verify product details prior to ordering parts to ensure the information is up to date with current manufacturer listings 

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

RECOIL Traction Bars: Last year BDS Suspension introduced the revolutionary spring loaded traction bar system, the RECOIL traction bar. This patent pending design was engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. BDS has expanded its lineup to now include specific mounting kits for the redesigned 2017 Ford Super Duty trucks. These next generation traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install over the factory u-bolt plates. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@sporttruckusainc.com

PR258

BDS Suspension adds to its lineup of vehicle specific mounting kits for the RECOIL traction bar system with new kits designed specifically for the 1988-1998, 1999-2006, and 2007-2016 Chevy and GMC 1/2-ton trucks. This revolutionary spring loaded traction bar system allows GM truck owners the freedom to improve traction on a variety of terrains without limiting wheel travel. The traction bars use heavy wall construction with internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They use a full float design and for bind free performance and can be installed with a range of lift heights. For more info see below or head to the BDS website.

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Product Description

RECOIL Traction Bar System

Kit ID Number(s)

#121406  ('88-06 GM1500 RECOIL Mounting Kit)
#121409  ('07-16 GM1500 RECOIL Mounting Kit)
#123409 (RECOIL Traction Bars)

MSRP

$884.48 (#121406 + 123409)
$884.48 (#121409 + 123409)

Vehicle Fitment

1988-1998 Chevy/GMC 1500 4wd Trucks
1999-2006 Chevy/GMC 1500 4wd Trucks
2007-2016 Chevy GMC 1500 2wd Trucks
2007-2016 Chevy GMC 1500 4wd Trucks

Important Notes

Will not fit regular cab trucks
Requires 2 rear bump stop extension
4wd models only ('88-06), Fits 2/4wd ('07-16)

RECOIL Traction Bars: Earlier this year BDS Suspension introduced the revolutionary spring loaded traction bar system, the RECOIL traction bar. This patent pending design was engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. BDS has expanded its lineup to now include specific mounting kits for the 1988-2016 Chevy and GMC 1500 trucks. These next generation traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install over the factory bolt plates. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.

'88-16 Chevy/GMC 1500 RECOIL Traction Bar Kit

Click image to view and save high-res image.

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR253

Earlier this year BDS Suspension introduced the RECOIL traction bar system, a revolutionary spring loaded traction bar system that allows truck owners the freedom to improve traction on a variety of terrains without limiting wheel travel. The traction bars use heavy wall construction with internal compression springs that can be loaded or unloaded to control axle wrap. Since the initial launch BDS has been adding to the RECOIL lineup with additional mounting kits to fit popular applications. The latest kits to hit the market are designed for the 1999-2016 Ford F250/F350 Super Duty trucks equipped with the (8ft) long bed. This kit joins the #123408 mounting kit currently available for the (6ft-7in) short bed Super Duty. This new kit is compatible with a range of lift heights and easy to install. For more info see below or head to the BDS website.

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Product Description

RECOIL Traction Bar System

Kit ID Number(s)

#123418  (RECOIL Mounting Kit)
#123409 (RECOIL Traction Bars)

MSRP

$920.80 (#123418 + 123409)
$277.88  (#123418)
$642.92 (#123409)

Important Notes

Fits All Cab Configurations, Long Bed Only
Fits Both SRW and DRW Trucks
Fits With 0-6" of Rear Lift

Vehicle Fitment

1999-2016 Ford F250 Super Duty (Long Bed)
1999-2016 Ford F350 Super Duty SRW (Long Bed)
1999-2016 Ford F350 Super Duty DRW (Long Bed)
*For Super Duty (Short Bed), Use #123408 Mounting Kit

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

RECOIL Traction Bars: Earlier this year BDS Suspension introduced the revolutionary spring loaded traction bar system, the RECOIL traction bar. This patent pending design was engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. BDS has expanded its lineup to now include specific mounting kits for the 1999-2016 Ford Super Duty long bed trucks. These next generation traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install on the spring pad and secure using existing u-bolts. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.

'99-16 Super Duty RECOIL Traction Bar Kit

Click image to view and save high-res image.

PR252

BDS Suspension adds to its lineup of RECOIL traction bars with new kits designed specifically for the 2007-2016 Toyota Tundra trucks. Similar to existing kits, these patent pending traction bars use heavy wall construction and a full floating design that won't bind up the suspension during articulation. The new mounting kit is built from 1/4" steel and is an easy bolt-on install only requiring a few holes to be drilled at the frame. At one end, the bars use a forged flexed end that can be adjusted to load or unload the 3000lb rated compression spring at the other end. This revolutionary design controls axle wrap and give your Tundra better traction when towing, racing, 4wheeling or daily driving on the road. These traction bars will fit stock and lifted trucks. For more info see below or head online to bds-suspension.com.

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

Product Description

RECOIL Traction Bar System

Kit ID Number(s)

#128408  (RECOIL Mounting Kit)
#123409 (RECOIL Traction Bars)

Vehicle Fitment

2007-2016 Toyota Tundra 4WD
2007-2016 Toyota Tundra 2WD

MSRP

$894.51 (#128408 + 123409)
$251.59  (#128408)
$642.92 (#123409)

Important Notes

DoubleCab/CrewMax, short bed models only
Will work with 0-6" of rear lift

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

RECOIL Traction Bars: Earlier this year BDS Suspension introduced the revolutionary spring loaded traction bar system, the RECOIL traction bar. This patent pending design was engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. BDS has expanded its lineup to now include specific mounting kits for the 2007-2016 Toyota Tundra 2WD/4WD trucks. These next generation traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install on the spring pad and secure using existing u-bolts. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.

'07-16 Tundra - RECOIL Traction Bar Kit

Click image to view and save high-res image.