Building on the current lineup of 2-6" leveling kits and lift systems for the new 2019+ Ford Ranger, BDS Suspension is now offering 3.5" Coilover Lift Systems engineered for superior ride, functionality and capability. These new 3.5" coilover systems build off the factory suspension mounting points offering improved ground clearance and wheel travel while retaining the ride quality with room for 33-34" tires. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 60,000-mile drivetrain warranty.
- FOX 2.0 performance series IFP coilovers for next level performance on any terrain.
- Performance UCAs add strength and increase droop travel.
- Increased right height and levels front/rear stance with room for 33-34” tires.
- Differential relocation to correct CV operating angle.
- Front fender intrusion beams to optimize clearance for larger tires.
- Rear HD shackle kit improves travel and levels stance.
- Rear FOX 2.0 performance IFP gas shocks to pair with front improved performance.
Rec'd Wheel/Tire Specs
275/65 Tires on 20x9 Wheels with 6.18" BS
285/60 Tires on 18x9 Wheels with 5.5-5.75" BS
305/55 Tires on 20x9 Wheels with 5" BS
Coldwater, MI: BDS Suspension adds new 3.5" coilover lift systems designed to take advantage of the stout factory front suspension design on the 2019 Ford Ranger. At the heart of these 3.5" coilover systems are a pair of specially tuned FOX 2.0 performance series coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX’s proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation.This kit takes performance for the next level by upgrading to FOX 2.0 performance series. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems are fully fabricated differential relocation brackets to correct CV axle operating angles.
In the rear of these lift systems the factory leaf springs are retained and 1” lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5” lift kits are a pair of FOX 2.0 IFP performance series gas shocks to match the front performance. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.
All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-60 mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 3.5” coilover lift systems from BDS Suspension.