Fox Remote reservoir coilover upgrade kit

New Product Release

BDS188

Part#

#1615H (6″ C/O Upgrade Kit)

#1616H (8″ C/O Upgrade Kit)


#122810 (’03-13 C/O Bracket Kit)

#88402096 (6″ Coilovers pr)

#88402097 (8″ Coilovers pr)

Product

6″ and 8″ Coilover Upgrade Kit

Application

2003-2013 Dodge Ram 2500 4wd – Diesel

2003-2012 Dodge Ram 3500 4wd- Diesel

Support Files & Links


6″ RAM – Fox Coilover Upgrade Kit
Hi–res image: dk_1615H_a.jpg


6″ RAM – Fox Coilover Upgrade Kit
Hi–res image: dk_1615H_c.jpg


8″ RAM – Fox Coilover Upgrade Kit
Hi–res image: dk_1616H_a.jpg


8″ RAM – Fox Coilover Upgrade Kit
Hi–res image: dk_1616H_c.jpg


RAM 2500 w/ 8″ Coilover System
Hi–res image: dodge_2500_13s_8co_a.jpg

6″ and 8″ Fox Remote Reservoir Coilover Upgrade Kits

2003-13 Dodge RAM 2500/2003-12 Dodge RAM 3500 4wd trucks

Coldwater, MI— December 4, 2014— Following last week’s announcements of new 6″ and 8″ complete coilover conversion long arm systems now shipping for the 2003-2013 Dodge Ram 2500 and 2003-2012 Dodge Ram 3500 4wd diesel trucks, BDS now offers a coilover upgrade kits for current BDS 6″ and 8″ long arm equipped trucks. This upgrade allows your to convert your progressive rate coil and shock setup over to factory series 2.5″ Fox remote reservoir coilovers pretuned to 6″ or 8″ heights under your RAM trucks. These coilover upgrades take your RAM to the next level in the dirt and on the street to improve vehicle performance across all terrains, allowing you to soak up the high-speed bumps with ease and out flex the competition while offering smooth on-road ride quality and predictable handling characteristics.

The kits include a pair of specially designed Fox 2.5 remote reservoir coilovers designed for the ultimate performance right out of the box. These Fox coilovers feature smooth-bore and honed seamless alloy body with black anodized 6061-T6 billet aluminum mounting components and a massive 7/8″ heat treated steel carbon shaft. The coilover uses a high flow piston design with specially formulated race oil for better performance at extreme operating temps. A 2.5″ smooth bore and honed seamless alloy reservoir allows for increased fluid capacity for better heat dispersion and mounts above the coilover using the supplied mounting brackets. Both 6″ and 8″ height coilovers use 3″ Eibach coil springs for long lasting performance and maximum travel. In addition the 6″ height coilovers utilize an additional tender coil to allow a full 10″ of travel. Both the 6″ and 8″ coilovers come pretuned and allow you to install them right out of the box. Both coilover setup have an adjustable preload collar allowing them to be raised or lowered to compensate for aftermarket accessories or to get a bit more height out of the suspension.

These coilovers are built for high performance with the weight of Cummins-powered RAM trucks and install in place of the coil springs using BDS’s new heavy duty upper and lower mounting brackets. These new upper towers are laser cut and fully welded to create a sturdy top mount at the frame with room for the reservoir. The lower mounts uses weld-in reinforcement tabs on the axle to hold up to whatever abuse your RAM HD is subjected to offroad. Get the most out of your RAM 2500/3500 with these coilover upgrades from BDS Suspension and Fox.

For more on these new coilover upgrade kits and other accessories for 2003-2013 RAM 2500 and 2003-2012 RAM 3500 4wd trucks head online to bds-suspension.com or call (517) 279-2135.

Click to view the complete 6″ Coilover Conversion Systems

Click to view the complete 8″ Coilover Conversion Systems

4 Comments on “Press Release #188: Dodge RAM 2500 Coilover Upgrade Kits
  • Cory says:

    I have a 8″ lift already installed on my 2016 ram 2500 cummins.i was wondering if y’all have the coilovers for it yet. And how much they cost and what it consists of. Thinking about upgrading.

    Reply
    • Carter @ BDS Suspension says:

      Hey Cory,
      Thanks for reaching out to us. At this time we don’t offer coilover conversions for the front of the late model RAM HD trucks (’14-17 RAM 2500, ’13-17 RAM 3500). We do have FOX 2.0 shocks and dual shock options currently available for them.

      Reply
  • Michael says:

    Hey Guys,

    I’m wondering if you could elaborate on this any… will there be coilovers for the current trucks? Ive noticed no one is doing it yet, is there a reason?

    Reply
    • Carter @ BDS Suspension says:

      Hey Michael, at this time we’re not offering coilover options for the late model RAM HD trucks. The chassis/suspension design changed between the ’03-13 RAM HD to the ’13-17 RAM HD trucks. While it is a simple conversion from coil spring to coilover on the older trucks, the newer RAMs require more extensive modification to convert over to coilovers. That’s not to say they won’t be offered at some point in the future, however at this point we do not offer any coilover options for the late model RAM HDs. Company policy dictates we can’t discuss new product development details until parts are on the shelf ready for sale.

      Reply

Leave a reply

Your email address will not be published. Required fields are marked *