PR381-1

BDS Suspension offers next level performance in a new smaller lift height with new 2" performance coilover systems for the 2019-2020 RAM 1500 4WD trucks. Designed to be so much more than a leveling kit, these new 2" coilover systems join the existing 4" and 6" lift options and have been specially designed to improve vehicle capability ride quality and strength. Offered with FOX 2.5 factory series remote reservoir coilovers (available with DSC adjustment), BDS performance series upper control arms (UCAs), and rear FOX 2.0 shocks these new systems are lift and level the stance with clearance for 33" tires. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty. Upgrade your new RAM 1500 with BDS and FOX.

Product Description

2019-2020 Ram 1500 2" Performance Coilover System

Product Info

#1664F - 2" Coilover System for '19+ RAM 1500 -$2,772.47
#1664FDSC - 2" DSC Coilover System for '19 RAM 1500 - $3,122.47

Features/Benefits

  • FOX 2.5 factory series remote reservoir coilovers for next level performance on any terrain.
  • Coilovers available with optional DSC adjusters to dial in high speed and low-speed compression settings.
  • Performance UCAs add strength and increase suspension travel.
  • Increased right height and levels front/rear stance with clearance for 33" tires.
  • Rear FOX 2.0 performance IFP gas shocks for improved performance.

Vehicle Fitment

2019-2020 RAM 1500 4WD Non-AirRide

Important Notes

  • Vehicles equipped with "Offroad or Rebel Package" will not achieve full 2" of lift, net ride height change will be around 1" above stock.
  • Will not fit vehicle equipped with factory Air Ride.
  • 33x12.50 tires cannot be installed on factory wheels due to clearance issue to the UCA. Aftermarket wheels with 33x12.50 tires or stock wheel with narrower tires required. Follow recommended tire/wheel specs.

*Attn State of California consumers: Prop 65 Warning

Related Kits/Products

#1638H - 4" Lift Systems for '19+ RAM 1500
#1637H/1637F - 6" Lift Systems for '19+ RAM 1500
#1641H - 4" Lift Systems for '19+ RAM 1500 w/ AirRide

Rec'd Wheel/Tire Specs

Stock Tires on Stock Wheel with Stock BS
295/65 Tires on 20x9 Wheels with 5" BS
33x12.50 Tires on 20x9 Wheels with 4.5" BS

Install Time/Difficulty

3 Hours / 3 of 5

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension ups the anty on 2019-2020 RAM 1500 performance with 2" coilover systems. Designed to be so much more than just a "leveling kit", these new coilover systems take advantage of the factory suspension geometry without overextending operating angles and offer next level performance in a smaller lift package. At the heart of these new 2" systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs above. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Rounding out these 2" coilover systems are pair of FOX 2.0 performance series IFP gas shocks to compliment the front and complete the package.
As with all BDS kits these come ready to install right out the box with all hardware packs and step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 RAM 1500 truck with this new 2” Coilover System from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR379-1

Building on the current lineup of 2-6" leveling kits and lift systems for the new 2019+ Ford Ranger, BDS Suspension is now offering 3.5" Coilover Lift Systems engineered for superior ride, functionality and capability. These new 3.5" coilover systems build off the factory suspension mounting points offering improved ground clearance and wheel travel while retaining the ride quality with room for 33-34" tires. As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 60,000-mile drivetrain warranty.

Product Description

3.5" Coilover System for '19+ Ford Ranger

Vehicle Fitment

2019 Ford Ranger

Product Info

1545FSL - 3.5" C/O System
$2,450.83 MSRP

Related Kits/Products

#1546H - 2.5" Lift Kit
#1545H - 3.5" UCA Lift Kit
#1547H - 6" IFS Lift System

Features/Benefits

  • FOX 2.0 performance series IFP coilovers for next level performance on any terrain.
  • Performance UCAs add strength and increase droop travel.
  • Increased right height and levels front/rear stance with room for 33-34” tires.
  • Differential relocation to correct CV operating angle.
  • Front fender intrusion beams to optimize clearance for larger tires.
  • Rear HD shackle kit improves travel and levels stance.
  • Rear FOX 2.0 performance IFP gas shocks to pair with front improved performance.

Rec'd Wheel/Tire Specs

275/65 Tires on 20x9 Wheels with 6.18" BS
285/60 Tires on 18x9 Wheels with 5.5-5.75" BS
305/55 Tires on 20x9 Wheels with 5" BS

Install Time/Difficulty

4 Hours / 3 of 5

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension adds new 3.5" coilover lift systems designed to take advantage of the stout factory front suspension design on the 2019 Ford Ranger. At the heart of these 3.5" coilover systems are a pair of specially tuned FOX 2.0 performance series coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX’s proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation.This kit takes performance for the next level by upgrading to FOX 2.0 performance series. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Finishing out the front of these 3.5" systems are fully fabricated differential relocation brackets to correct CV axle operating angles.

In the rear of these lift systems the factory leaf springs are retained and 1” lift comes from a heavy duty replacement shackle. These shackles are built from high strength 3/8" steel and have the benefit of leveling the stance, correcting rear pinion angle and allowing for increased rear suspension travel. Also supplied for the rear of these 3.5” lift kits are a pair of FOX 2.0 IFP performance series gas shocks to match the front performance. All kits come finished in a durable black e-coat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS’s No Fine Print Warranty, ESC System compatibility and a 5year-60 mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 Ford Ranger with these new 3.5” coilover lift systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Featured Rides: 2020 Ford F350 - Project Go Beyond | FJ Cruiser

Our 2020 Ford F350, better known as #ProjectGoBeyond, was our 2019 SEMA build. This rig is now hanging out in Colorado with our Sales Rep, Miles.

This rig underwent a lot of customization to get to become what we consider the ultimate overlanding rig. You can read all about it here and check out the build specs on the right -->  We are looking forward to taking it out for some true overlanding adventures as soon as possible.

Also hanging out in Miles's driveway is a Toyota FJ cruiser. This rig is used more so as a daily driver, but it has been out on some pretty fun adventures as well; including the National FJ Summit. We've included a few photos from this event below.

Stay tuned for more employee ride features coming out soon. If you're a customer or dealer running BDS and think we should feature it, send in photos and videos for your chance for us to spotlight your ride.

Vehicle Specs:

2020 Ford F350 Super Duty 4WD (Crew Cab, Long Bed)
6.7L Powerstroke Diesel, 10-speed Transmission, 2-speed T-Case

Chassis/Suspension:
BDS 4” Radius Arm Lift System
FOX 2.5 DSC Coilovers and 2.0 IFP Shocks
BDS/FOX Dual Steering Stabilizer Kit
BDS GlideRide Rear Leaf Springs
Ridetech Level Tow Air Bag System

Wheels & Tires:
40x14.50x20 Mickey Thompson MTZ P3 Tires
20x10 Method NV605 Black Wheels (4.5" BS)

Powertrain Mods:
Banks Power Derringer Tuner w/ iDash Data Monster
Ford Performance/Borla Catback Exhaust System

Interior Mods:
Katzkin premium mahogany and black leather upholstery w/ customer embroidery
Kicker Audio System (VSS System and BF400 Portable Bluetooth Speakers)

Exterior Mods:
2-Tone Paint - OE Agate Black and Chroma Elite Copper
Knapheide Utility Box w/ Custom Built Rack System
Addictive Desert Designs Stealth Fighter Front Bumper
Warn Zeon 12-S Winch with Sidewinder Hook
Ford Performance "Tremor" Running Boards
(BDS) Custom Fabricated Rear Bumper
(BDS) Custom Fabricated Modular Bed Rack System
Rigid LED Lighting (40" RDS, SR-Series, A-Series and D-Series)
Fiberwerx Front Fiberglass Fenders (4" Bulge)
Dometic CFX-75DZW Electric Cooler on MSA 4x4 Drop Slide
CuisineArt 2-Burner Gas Grill
MaxTrax MKII Recovery Devices
Rotopax 2.5 Gallon Fuel and Water Containers
Hi-Lift Xtreme 60" Jack and Accessories
Shovel Kit
Warn Epic Recovery Kit
Rhino Rack Pioneer Platform with Backbone mounting system
James Baroud USA Evasion XXL Hardshell Tent
James Baroud USA Retractable Awning
2000-Watt Power Inverter and 12V Power Supplies
Ridetech Air Compressor and 2 Gallon Tank

 

 

PR378-1

BDS Suspension is now shipping complete 3" radius arm systems for the 2019+ RAM 2500 4WD trucks. These kits have been engineered to improve on-road comfort and handling while enhancing offroad capability. These kits include high strength tubular radius arms, front progressive rate coil springs, rear coil spacers to level out the stance, your choice of gas shocks, HD track bar and more to allow clearance for 35" tires. As with all BDS Suspension systems these new 3" radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.

Product Description

3" Radius Arm Systems for 2019+ RAM 2500 - Diesel w/ Rear Coil Springs

Vehicle Fitment

2019 RAM 2500 Diesel

Rec'd Wheel/Tire Specs

35x12.50 tires on 17x9/18x9/20x9  wheels with 4.5-5" BS

Product Info

#1653H - 2019 Ram 2500 3" Radius Arm Diesel - Rear Coil Springs - NX2 Shocks - $1,957.80
#1653FS - 2019 Ram 2500 3" Radius Arm Diesel - Rear Coil Springs - Fox Shocks - $2,359.76

Features/Benefits

  • Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
  • High strength progressive rate front coil springs for a great ride on any terrain
  • HD adjustable front track bar and rear relocation bracket to correctly position both axles under the truck
  • F/R sway bar links and bump stop extensions to maintain functionality.
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Allows clearance for 35" tires

Install Time/Difficulty

5 Hours / 3 of 5

Important Notes

  • Will not fit rear air-ride equipped models
  • Will not fit Power Wagon models
  • Kit designed for diesel models only

*Attn State of California consumers: Prop 65 Warning

Factory Protection Plus
  • 5-year, 100,000 mile drivetrain warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

Coldwater, MI: BDS Suspension expands its listings for the late model 2019+ RAM 2500 4WD Diesel trucks with new 3” radius arm systems that are on the shelf ready to ship. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.

Up front these systems use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle. A pair of extended length sway bar links correct the OEsway bar operating angle for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 2500 kits a pair of 1.25" steel fabricated coil spacers are used to level out the stance and maintain load capacity. Extended length sway bar links correct sway bar operating angle for optimal performance and a longer rear bump stop correctly limit compression travel. The rear axle is recentered under the vehicle with the use of a heavy duty axle mounted relocation bracket. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 3" radius arm systems from BDS Suspension.

Media Gallery

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

PR377-1

BDS is now offering heavy duty replacement rear sway bar links to fit lifted Toyota Tundra applications. Available in 2 lengths, these sway bar links are designed to correct the rear sway bar operating angle for improved performance for use on 4.5" and 7" BDS lift kits and are compatible with most other lift kits on the market. These sway bar links use high strength steel construction with welded eyelets and a clear zinc finish. Polyurethane bushings and sleeves are used to ensure long bushing lift and quiet operation. Upgrade the rear sway bar links on your lifted Toyota Tundra with BDS Suspension.

Product Description

Rear Sway Bar Links for Toyota Tundra

Vehicle Fitment

2007+ Toyota Tundra 2WD/4WD

Features/Benefits

  • Steel construction with welded eyelets and clear zinc finish
  • Improves rear swayer operating angle for better performance on lifted applications
  • Polyurethane hourglass bushings for long life and quiet operation

Related Kits/Products

814H/814F - 4.5" Lift Kits for 2007-2015 Tundra
813H/813F - 7" Lift Kits for 2007-2015 Tundra
819H/819F - 4.5" Lift Kits for 2016-2018 Tundra
818H/818F - 7" Lift Kits for 2016-2018 Tundra

Kit Info

128308 - Tundra Rear Sway Bar Links (4.5" Lift Kit)
128509 - Tundra Rear Sway Bar Links (7" Lift Kit)

Install Time/Difficulty

1 Hour / 1 of 5

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain Warranty
  • BDS’s exclusive No Fine Print Warranty

***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***

© BDS Suspension, 491 W. Garfield Ave. Coldwater, MI 49036
(517) 279-2135 | bds-suspension.com | sales-bds@ridefox.com

BDS Featured Rides: 2017 Ford Super Duty | Project Renaissance

If you live in the Southeast region of the US, you may recognize this guy or this truck! Brad is our Territory Rep and he is driving the BDS 2017 Ford F250, nicknamed Project Renaissance. This rig made its debut at the 2019 Daytona Truck Meet. Since then it has been to several other shows including: Scrapin The Coast 2019, Rocky Top Diesel Shootout 6, Rudys Diesel Fall Event, The Petit Le Mans, and Lone Star Throwdown 2020. We are itching to get this rig back out to some more events and shows across the country. Brad has been in the industry 16 years.

Brad's interest in the industry started at his very first NOPI car show as a kid. Out of highschool he worked as a tech in a shop, from there he got into sales, management, and even owned his own shop for a while. In 2013 he built his own SEMA rig, which debuted in the American Force booth. In 2017 Brad started his journey with BDS. Since then he has been growing his territory and building relationships with customers dealers.

Project Renaissance is always getting complements when out on the road. People of all ages and backgrounds are always coming up to ask questions. For current specs check out the tab on the right  --------->

Stay tuned for more employee ride features coming out soon. If you're a customer or dealer running BDS and think we should feature it, send in photos and videos for your chance for us to spotlight your ride.

Vehicle Specs:

  • 2017 Ford F-250 6.7 Powerstroke Diesel

Current Mods:

  • 8” BDS 4 Link / 2.5 FOX C/O system (more info)
  • Dual FOX steering stabilizer kit
  • Recoil traction bars
  • 24x14 American Force Wheels RUKUS
  • 38x15.50x24 Mickey Thompson BAJA BOSS
  • Magnaflow Filter-Back Exhaust
  • Body Guard A2L Bumpers
  • Rigid Industries - A-Series, Radiance Series, Flush Mount E-Series
  • Diode Dynamic Lighting - HID headlights, LED Switchback front turn signals, LED turn/brake lights, LED 3rd Brake light
  • AMP Research Powersteps
  • Paint matched Headlights, Fender badges - Smoked cab lights, mirror lights, 3rd brake light, taillights by Retro Customz

Future Plans:

  • Converting the grill and headlights from the 17-19 style to the 2020 style.