BDS Suspension is now shipping complete 3" radius arm systems for the 2014-2018 and 2019-2021 RAM 2500 4WD trucks equipped with rear air ride. These kits have been engineered to improve on-road comfort and handling while enhancing offroad capability. These kits include high strength tubular radius arms, front progressive rate coil springs, rear coil spacers to level out the stance, your choice of gas shocks, HD track bar and more to allow clearance for 35” tires while retaining the air ride system functionality. As with all BDS Suspension systems these new 3” radius arm systems are backed by Factory Protection Plus for peace of mind wherever you choose to explore.
BDS 3" Radius Arm Systems
for RAM 2500 w/ Rear Air Ride
2014-2018 RAM 2500 4WD Diesel w/ Rear Air
2019-2021 RAM 2500 4WD Diesel w/ Rear Air
Install Time / Difficulty
5 hours / 3 of 5
BDS1712H/FS - 3" Radius Arm System (14-18 RAM)
BDS1713H/FS - 3" Radius Arm System (19-21 RAM)
- Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
- High strength progressive rate front coil springs for a great ride on any terrain
- HD adjustable front track bar and rear relocation bracket to correctly position both axles under the truck
- F/R sway bar links and bump stop extensions to maintain functionality
- Rear sensor brackets to retain functionality of air ride system
- BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
- Allows clearance for 35" tires
Recommended Wheel/Tire Specs
35x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5-5" BS)
- Designed for use on rear air-ride equipped models only
- Kit designed for diesel models only
- Will not fit Power Wagon models
***Check the BDS website to verify details prior to ordering to ensure information is up-to-date with current manufacturer listings***
Coldwater, MI: BDS Suspension expands its listings for the late model 2019+ RAM 3500 4WD Diesel trucks with new 3” radius arm systems that are on the shelf ready to ship. Designed to improve the looks and performance of your new RAM, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling.
Up front these systems use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle. A pair of extended length sway bar links correct the OE sway bar operating angle for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.
In the rear of the RAM 3500 kits a pair of 2" steel fabricated lift blocks and extended u-bolts are used to provide a level to slightly tail high stance while maintaining load capacity. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks.
As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 3" radius arm systems from BDS Suspension.